Required information Air is to be heated by passing it over a bank of 3-m-long tubes inside which steam is condensing at 100°C. Air approaches the tube bank in the normal direction at 20°C and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is 1.6 cm, and the tubes are arranged in-line with longitudinal and transverse pitches of SL = ST= 6 cm. There are 20 rows in the flow direction with 10 tubes in each row. Assume the air properties at mean temperature of 35°C and 1 atm. The air properties at the assumed mean temperature of 35°C and 1 atm are k= 0.02625 W/m-K, p = 1.145 kg/m³, cp= 1.007 kJ/kg-K, Pr = 0.7268, µ = 1.895 × 10¬5 kg/m-s, Prs = Pr@ Ts = 100°C = 0.7111. Determine the rate of condensation of steam inside the tubes. The rate of condensation of steam inside the tubes is | kg/min.

Required information Air is to be heated by passing it over a bank of 3-m-long tubes inside which steam is condensing at 100°C. Air approaches the tube bank in the normal direction at 20°C and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is 1.6 cm, and the tubes are arranged in-line with longitudinal and transverse pitches of SL = ST= 6 cm. There are 20 rows in the flow direction with 10 tubes in each row. Assume the air properties at mean temperature of 35°C and 1 atm. The air properties at the assumed mean temperature of 35°C and 1 atm are k= 0.02625 W/m-K, p = 1.145 kg/m³, cp= 1.007 kJ/kg-K, Pr = 0.7268, µ = 1.895 × 10¬5 kg/m-s, Prs = Pr@ Ts = 100°C = 0.7111. Determine the rate of condensation of steam inside the tubes. The rate of condensation of steam inside the tubes is | kg/min.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter5: Analysis Of Convection Heat Transfer

Section: Chapter Questions

Problem 5.65P

See similar textbooks

Similar questions

The airflow at 1 atm has a free stream velocity and temperature of 5 cm/s and 25°C, respectively. Determine the heat flux on the plate surface and the convection heat transfer coefficient of the airflow.
What are the three layers within turbulent flow? In which layer is the velocity smallest and in which layer is the turbulent portion of the shear stress dominant?
A 1.2-in-outer-diameter pipe is to span across a river at a 140-ft-wide section while being completely immersed in water. The average flow velocity of the water is 10 ft/s, and its temperature is 70°F. Determine the drag force exerted on the pipe by the river.
The local atmospheric pressure in Denver, Colorado (elevation 1610 m), is 83.4 kPa. Air at this pressure and at 30°C flows with a velocity of 4.8 m/s over a 2.3-m × 8-m flat plate whose temperature is 120°C. Determine the rate of heat transfer from the plate if the air flows parallel to the 2.3-m-side. The properties of air at 0.823 atm and at the film temperature of (120 + 30)/2 = 75°C are k = 0.02971 W/m·°C, ν = 2.486 × 10-5 m2/s, and Pr = 0.7166.
The local atmospheric pressure in Denver, Colorado (elevation 1610 m), is 83.4 kPa. Air at this pressure and 20°C flows with a velocity of 8 m/s over a 1.5 m * 6 m flat plate whose temperature is 140°C. Determine the rate of heat transfer from the plate if the air flows parallel to the (a) 6-m-long side and (b) the 1.5 m side.
Consider laminar flow over a flat plate. How does the local friction coefficient change with position?
What are the turbulence intensity differences on offshore and onshore?
Question No. 3: During a cold winter day, wind at 55 km/h is blowing parallel to a 4-m-high and 10-m-long wall of a house. If the air outside is at 5°C and the surface temperature of the wall is12°C, determine the rate of heat loss from that wall by convection. What would your answer be if the wind velocity was doubled
Air is to be heated by passing it over a bank of 4-m-long tubes inside which steam is condensing at 100°C. Air approaches the tube bank in the normal direction at 20°C and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is 0.016 m, and the tubes are arranged staggered with longitudinal and transverse pitches of SL = ST = 0.03 m. There are 20 rows in the flow direction with 10 tubes in each row. Assume the air properties at mean temperature of 35°C and 1 atm. The air properties at the assumed mean temperature of 35°C and 1 atm are k = 0.02625 W/m·K, ρ = 1.145 kg/m3, cp = 1.007 kJ/kg·K, Pr = 0.7268, μ = 1.895 × 10−5 kg/m·s, Prs = Pr@Ts = 100°C = 0.7111. Determine the rate of heat transfer.
Air is to be heated by passing it over a bank of 4-m-long tubes inside which steam is condensing at 100°C. Air approaches the tube bank in the normal direction at 20°C and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is 0.016 m, and the tubes are arranged staggered with longitudinal and transverse pitches of SL = ST = 0.03 m. There are 20 rows in the flow direction with 10 tubes in each row. Assume the air properties at mean temperature of 35°C and 1 atm. The air properties at the assumed mean temperature of 35°C and 1 atm are k = 0.02625 W/m·K, ρ = 1.145 kg/m3, cp = 1.007 kJ/kg·K, Pr = 0.7268, μ = 1.895 × 10−5 kg/m·s, Prs = Pr@Ts = 100°C = 0.7111. Determine the pressure drop across the tube bank
Please help with this questionHot carbon dioxide exhaust gas at 1 atm is being cooled by flat plates. Thegas at 220°C flow is parallel over the upper and lower surfaces of a 3-m-longflat plate at a velocity of 3 m/s. If the flat plate surface temperature ismaintained at 80°C.Determine the local convection heat transfer coefficient at 1 m fromthe leading edge and calculate the average convection heat transfer coefficient over theentire plate.
Calculate the heat transfer from a 60 cm x 60 cm plate on which air flows at 40 C and. The plate temperature is 100 C while the air speed is 5 m/s.