Required information Problem 09.085 - Heat Addition to a Gas-Turbine Power Plant A stationary gas-turbine power plant operates on a simple ideal Brayton cycle with air as the working fluid. The air enters the compressor at 95 kPa and 290 K and the turbine at 760 kPa and 1100 K. Heat is transferred to air at a rate of 37500 kJ/s. Problem 09.085.b - Power Delivered Assuming Variable Heat Capacities Determine the power delivered by this plant accounting for the variation of specific heats with temperature. The power delivered by this plant is kW.

Required information Problem 09.085 - Heat Addition to a Gas-Turbine Power Plant A stationary gas-turbine power plant operates on a simple ideal Brayton cycle with air as the working fluid. The air enters the compressor at 95 kPa and 290 K and the turbine at 760 kPa and 1100 K. Heat is transferred to air at a rate of 37500 kJ/s. Problem 09.085.b - Power Delivered Assuming Variable Heat Capacities Determine the power delivered by this plant accounting for the variation of specific heats with temperature. The power delivered by this plant is kW.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A gas-turbine power plant operates on the simple Brayton cycle between the pressure limits of 100 and 1200 kPa. The working fluid is air, which enters the compressor at 30°C at a rate of 150 m3/min and leaves the turbine at 500°C. Using constant specific heats for air and assuming a compressor isentropic efficiency of 82 percent and a turbine isentropic efficiency of 88 percent, determine (a) the net power output, (b) the work ratio, and (c) the thermal efficiency.
A gas-turbine power plant operates on the simple Brayton cycle between the pressure limits of 100 and 1600 kPa. The working fluid is air, which enters the compressor at 40C at a rate of 850 m3/min and leaves the turbine at 650C. Using variable specific heats for air and assuming a compressor isentropic efficiency of 85 percent and a turbine isentropic efficiency of 88 percent, determine (a) the net power output, (b) the back work ratio, and (c) the thermal efficiency.
A simple power plant utilizing the Rankine Cycle operates with an inlet boiler pressureof 5 MPa and an inlet condenser pressure of 300 kPa. Because of frictional effects, thepressure of the water drops 0.3 MPa in the boiler and 3 kPa in the condenser. Thetemperature of the steam as it enters the turbine is 700 °C. The adiabatic efficiency ofthe pump and of the turbine are 83 percent and 88 percent, respectively. The pumpand the turbine are adiabatic, and the water enters the pump as saturated liquid. It canbe assumed that heat transfer to the water in the boiler is from a reservoir at 1500 K,and the environment is at 25 °C.Determine the thermal efficiency of the cycle and compare it with the thermal efficiencyof (a) a Carnot cycle, and (b) the ideal Rankine Cycle. Specify the amount of entropygenerated in each step of the real cycle
A gas-turbine power plant operates on the simple Brayton cycle between the pressure limits of 100 and 1600 kPa. The working fluid is air, which enters the compressor at 40°C at a rate of 850 m3 /min and leaves the turbine at 650°C. Assuming a compressor isentropic efficiency of 85 percent and a turbine isentropic efficiency of 88 percent, determine the net power output.
A stationary gas-turbine power plant operates on an ideal regenerative Brayton cycle (∊ = 100 percent) with air as the working fluid. Air enters the compressor at 95 kPa and 290 K and the turbine at 880 kPa and 1100 K. Heat is transferred to air from an external source at a rate of 30,000 kJ/s. Determine the power delivered by this plant assuming constant specific heats for air at room temperature.
Steam enters the high-pressure turbine of an ideal reheat Rankine cycle at 10 MPa and 500°C. The low-pressure turbine inlet admits steam at 1 Mpa. Assume that the pump inlet is a saturated liquid at 10 kPa and that 80 MW of power is produced overall. 1. Using the property tables for both the inlet and outlet of the pump, determine the enthalpy in kJ/kg of the pump outlet. 2. Report the amount of heat added, in kJ/kg, in the boiler before the high-pressure turbine to one decimal place using rounding. 3. Report the amount of work produced in the high-pressure turbine, in kJ/kg, to one decimal place using rounding. 4. Report the amount of heat added in the reheat process, in kJ/kg, to one decimal place using rounding. 5. Report the amount of work produced in the low-pressure turbine, in kJ/kg, to one decimal place using rounding.
A stationary gas-turbine power plant operates on an ideal regenerative Brayton cycle (∊ = 100 percent) with air as the working fluid. Air enters the compressor at 95 kPa and 290 K and the turbine at 880 kPa and 1100 K. Heat is transferred to air from an external source at a rate of 30,000 kJ/s. Determine the power delivered by this plant accounting for the variation of specific heats with temperature.
In a Rankine Cycle , saturated liquid water at 1 bar is compressed isentropically to 150 bar. First by heating in a boiler and then by superheating at constant pressure of 150 Bar, the water substance is brought to 750 K. After Adiabatic reversible expansion in a turbine at 1 Bar, it is then cooled in a condenser to a saturated liquid. How much work is generated in the turbine? (include diagram)
This is thermodynamics. Please complete solution A power plant operating on a Rankine cycle has steam entering the turbine at 500 °C and 2 MPa. The turbine and pump efficiencies are 85 and 90 percent, respectively. If the water enters the pump at 10 kPa at a rate of 162,000 kg/hr, calculate the (a) actual turbine power, (b) actual pump power, (c) actual heat added to the water in the boiler, (d) actual cycle thermal efficiency, and (e) actual condition of steam leaving the turbine.
A gas turbine power plant working on Brayton cycle, Explain the working principle of the cycle with physical diagram as well as P-V and T-s diagrams, and with all the required details
A turbine with one extraction for regenerative feedwater heating, receives steam with an enthalpy of 3373 kJ/kg and discharges it with an exhaust enthalpy of 2326 kJ/kg. The ideal regenerative cycle feedwater heater receives 11338 kg/h of extracted steam at 345 kPa (whose h = 2745 kJ/kg). The feedwater (condensate from the condenser) enters the heater with an enthalpy of 140 kJ/kg and departs saturated at 345 kPa (hf = 582 kJ/kg). Calculate the turbine output in kW
A stationary gas-turbine power plant operates on a simple ideal Brayton cycle with air as the working fluid. The air enters the compressor at 95 kPa and 290 K and the turbine at 760 kPa and 1100 K. Heat is transferred to air at a rate of 35,000 kJ/s. Determine the power delivered by this plant accounting for the variation of specific heats with temperature.