respectively. The tank has an inner diameter of 4 m. The thickness of the cylindrical are made from material having an allowable normal stress of 150 MPa and 250 MPa, shells and two hemispherical shells as shown. The tank and the 25 mm diameter bolts The gas storage tank is fabricated by bolting together two half cylindrical thin 1. and hemispherical shells is 40 mm and 30 mm, respectively. Determine 1) the maximum internal pressure it can sustain. 2) the minimum required number of bolts for each hemispherical cap

respectively. The tank has an inner diameter of 4 m. The thickness of the cylindrical are made from material having an allowable normal stress of 150 MPa and 250 MPa, shells and two hemispherical shells as shown. The tank and the 25 mm diameter bolts The gas storage tank is fabricated by bolting together two half cylindrical thin 1. and hemispherical shells is 40 mm and 30 mm, respectively. Determine 1) the maximum internal pressure it can sustain. 2) the minimum required number of bolts for each hemispherical cap

Name: respectively. The tank has an inner diameter of 4 m. The thickness of
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: respectively. The tank has an inner diameter of 4 m. The thickness of the cylindricalare made from material having an allowable normal stress of 150 MPa and 250 MPa,shells and two hemispherical shells as shown. The tank and the 25 mm diameter boltsT

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Determine the largest internal pressure that can be applied to a cylin-drical tank of 5.5-ft outer diameter and 5/8-in. wall thickness if the ulti-mate normal stress of the steel used is 65 ksi and a factor of safety of 5.0 is desired
A spherical gas tank has an inner radius of r = 1.5 m. If it is subjected to an internal pressure of p = 420 kPa, determine its minimum required thickness if the maximum normal stress is not to exceed 12 MPa.
A spherical gas tank has an inner radius of r = 1.5 m. If it is subjected to an internal pressure of p = 300 kPa, determine its required thickness if the maximum normal stress is not to exceed 12 MPa.
A cylindrical propane tank has an outside diameter of 3.25 m. If the allowable hoop stress is 100 MPa and the allowable axial or longitudinal stress is 45 MPa, determine the minimum thickness of the pipe when the internal pressure that can be applied to the tank is 1.25 MPa.
Determine the normal stress in a basketball of 9.5-in. outer diameter and 0.125-in. wall thickness that is inflated to a gage pressure of 9 psi.
A cylindrical pressure vessel is fabricated from steel plates whichhave a thickness of 20 mm. The diameter of the pressure vessel is 500 mm andits length is 3m. Determine the maximum internal pressure which can be appliedif the stress in the steel is limited to 140 MPa.
The tank shown is fabricated from steel plate. Determine the required thickness of plate which maybe used if the stress along the transverse direction is to be used which is equal to 40 MPa and the internal pressure is 1.5 MN/m2
The spherical tank as shown is made of steel. The tank has a radius 20 ft and wall thickness of 1 inch. If the allowable stress of the steel is 9000 psi, determine the maximum safe pressure for the tank
A hydraulic system is used to apply a force in an external fixation device to hold brokenends. The piston of this hydraulic ram is 30 cm in diameter and the water pressure is 3 MN/?2 Determine The stress in the piston rod which has dimeter of 4 cm
A 4-ft diameter spherical tank is subjected to an internal pressure of 12 psf. If the wall thickness is 0.38", determine the tangential stress of the wall in psi.
The spherical gas tank is fabricated by bolting together two hemispherical thin shells. If the 510 cm inner diameter tank is to be designed to withstand a gauge pressure of 2802 kPa, determine the minimum number of 28-mm diameter bolts that must be used to seal it. The tank and the bolts are made from material having an allowable normal stress of 130 GPa and 323 MPa,respectively.
The unpressurized cylindrical storage tank shown has a 3/16-in. wall thickness and is made of steel having a 60-ksi ultimate strength in ten-sion. Determine the maximum height h to which it can be filled with water if a factor of safety of 4.0 is desired. (Specific weight of water 562.4 lb/ft3. determine the maximum normal stress and the maximum shearing stress in the cylindrical wall when the tank is filled to capacity (h=48 ft)