Solve the problem, show your complete solution. Answer must be in 3 decimal places. 1. A multiple-disk clutch transmits 25 kW at 600 rpm. It has 17 disks, 8 disks mounted on one shaft and 9 on the other shaft. The disks are 150 mm outside diameter and 70 mm inside diameters, respectively. If the coefficient of friction is 0.25, find the axial force required to engage the clutch and transmit the torque.

Solve the problem, show your complete solution. Answer must be in 3 decimal places. 1. A multiple-disk clutch transmits 25 kW at 600 rpm. It has 17 disks, 8 disks mounted on one shaft and 9 on the other shaft. The disks are 150 mm outside diameter and 70 mm inside diameters, respectively. If the coefficient of friction is 0.25, find the axial force required to engage the clutch and transmit the torque.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.76P: The clutch described in Prob. 7.75 is to transmit a torque of 120lbft when the total spring force...

See similar textbooks

Similar questions

A clutch having a single driving plate has a mating surface of 300 mm outside diameter and 225 mm inside diameter. Which of the following is the mean radius of the friction surface assuming that the clutch is newly installed (use uniform pressure theory)? Group of answer choices 264.28 mm 132.14 mm 131.25 mm 262.50 mm
A shaft turning 150 RPM is to drive another shaft at 200 RPM. Find the diameters of the two pulleys, using integral number of inches for each diameter, to give as nearly as possible a belt speed of 2500 FPM. Please provide illustration.
What is the total force exerted by the pinion on the gear? Report your answer in lbf.
A roller chain and sprocket is to drive vertical centrifugal discharge bucket elevator with a center distance of 70.82 inches. The pitch of chain connecting sprockets is 1.75”. The driving sprocket is rotating at 217 rpm and has 11 teeth while the driven sprocket is rotating at 38 rpm. Determine (a) the number of teeth of driven sprocket and (b) the chain length in pitches, and (c) the chain length in inches.
A single-strand roller chain drive connects a 50-hp engine to a lawn waste chipper/shredder, as shown below. As the engine operates at 1000 rpm, the shredding teeth should rotate at 250 rpm. The driven sprocket has 60 teeth. Determine the chain speed.
A clutch has an outside diameter of 8 in and inside diameter of 4 in. An axial force of 500 lbis used to hold the two parts together. If friction is 0.4, how much torque can the clutch handle?
A multiple-disk clutch with 17 disks, 8 disks turning with one shaft and 9 with the other shaft, is rated at 25 hp at 500 rpm. The outside and inside diameters of the disks are 5½ and 2½ in., respectively. The coefficient of friction is 0.2. (a) Determine the axial force required to transmit the rated torque and determine the pressure between the disks.
How much torque can a cone clutch transmit if the angle of the conical elements is 10 degrees. The mean diameter of conical sections is 200 mm and an axial force of 600 N is applied. Consider a coefficient of friction
A shaft turning 200 RPM is to drive another shaft at 250 RPM connected in open belt. Find the diameters of the two pulleys, using integral number of inches for each diameter, to give as nearly as possible a belt speed of 3500 FPM.
the radius of each pulley is 5 inches and the coeffiecent of friction is 0.3 a) determine the largest torque that can be transmitted if the allowable belt tension is 1000 lbs? b) what would be the largest torque if the belt is a v-belt with a groove angle of 75 degrees? c) which style belt transmits the highest torque a flat belt or a v belt?
The clutch described in Prob. 7.75 is to transmit a torque of 120lbft when the total spring force exerted on the pressure plate is 75 lb. If Ri=4in., calculate the minimum acceptable value for RO. Assume that the clutch is new.
...A plate clutch with single driving plate with contact surfaces on each is required to transmit 35 kW at 2400 rpm. Given that μ = 0.29, R = 1.25r, Pmax = 0.2 MPa, determine the inside radius of the frictional surface in mm. Assume the uniform wear conditions.