Steam enters the first-stage turbine at 40 bar and 500 °C with a mass flow rate of 17.36 k9. Steam exits the turbine at 20 bar and 400 °C. The steam is then reheated at constant pressure to 500 °C before entering the second-stage turbine. Steam leaves the second-stage turbine at 0.6 bar. For operation at steady state, and ignoring stray heat transfer and kinetic and potential energy effects, sketch a T - s diagram of processes 1-4 and determine: (a) The entropy generated in the first-stage turbine [0.64 kW /K] (b) The isentropic efficiency of the first-stage turbine [89%] (c) The exit temperature of the turbine 2 if its isentropic efficiency is 77, = 0.85 [130 °C] (d) The entropy production in the reheater if the average boundary temperature is 600 °C [0.91 kW/K] Steam + P = 40 bar T = 500°C (AV), = 90 m³/min P4= 0.6 bar Power Turbine Turbine P2 = 20 bar T = 400°C P3 = 20 bar T3 = 500°C Reheater 2 Qreheater

Steam enters the first-stage turbine at 40 bar and 500 °C with a mass flow rate of 17.36 k9. Steam exits the turbine at 20 bar and 400 °C. The steam is then reheated at constant pressure to 500 °C before entering the second-stage turbine. Steam leaves the second-stage turbine at 0.6 bar. For operation at steady state, and ignoring stray heat transfer and kinetic and potential energy effects, sketch a T - s diagram of processes 1-4 and determine: (a) The entropy generated in the first-stage turbine [0.64 kW /K] (b) The isentropic efficiency of the first-stage turbine [89%] (c) The exit temperature of the turbine 2 if its isentropic efficiency is 77, = 0.85 [130 °C] (d) The entropy production in the reheater if the average boundary temperature is 600 °C [0.91 kW/K] Steam + P = 40 bar T = 500°C (AV), = 90 m³/min P4= 0.6 bar Power Turbine Turbine P2 = 20 bar T = 400°C P3 = 20 bar T3 = 500°C Reheater 2 Qreheater

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

THERMODYNAMICS - Conservation of Mass UPLOAD AND EXPLAIN COMPLETE SOLUTION. Consider steam that enters a turbine at 70 bar, 530oC with a velocity of 64 m/s. The turbine is operating at steady state conditions and the steam leaves the turbine as a dry saturated vapor at 10 bar. The inlet diameter of the turbine is 0.45 m and the outlet diameter is 3.6 m. Determine the mass flow rate of steam through the turbine.
As shown in the figure, Refrigerant 22 enters the compressor of an air conditioning unit operating at steady state at 40oF, 80 lbf/in2 and is compressed to 160oF, 200 lbf/in2. The refrigerant exiting the compressor enters a condenser where energy transfer to air as a separate stream occurs, and the refrigerant exits as a liquid at 200 lbf/in2, 90oF. Air enters the condenser at 70oF, 14.7 lbf/in2 with a volumetric flow rate of 1500 ft3/min and exits at 110oF. Neglect stray heat transfer and kinetic and potential energy effects, and assume ideal gas behavior for the air.
Carbon dioxide gas is compressed at steady state from a pressure of 22 lbf/in2 and a temperature of 32oF to a pressure of 50 lbf/in2 and a temperature of 110oF. The gas enters the compressor with a velocity of 30 ft/s and exits with a velocity of 80 ft/s. The mass flow rate is 4000 lb/hr. The magnitude of the heat transfer rate from the compressor to its surroundings is 5% of the compressor power input. Use the ideal gas model with cp = 0.21 Btu/lb·oR and neglect potential energy effects.
Apply SFEE for the steam nozzle used in the steam powerplant and determine the outlet velocity of the steam using thefollowing details.Steam at 18 bar and 350°C steadily enters a nozzle whose inletarea is 200 cm2. The mass flow rate of the steam is 4.5 g/s. Heatlosses from the nozzle per unit mass of the steam are estimatedto be 2.8 kJ/kg. Steam leaves the nozzle at 14 bar, 300 °C.Determine the outlet velocity of the steam.
True or false For an internally reversible, steady-state flow process, the heat transfer per unit mass can be represented as the area below the process line on a T-s diagram.
Figure 1 shows a regenerative gas turbine power plant. Air enters the compressor with a mass flow rate of 1 bar, 27°C and 0.562 kg/s and is compressed to 4 bar. The isentropic efficiency of the compressor is 80% and the regenerator efficiency is 90%. All the power generated from the high pressure turbine is used to run the compressor. The low pressure turbine provides net power output. The isentropic efficiency of each turbine is 87% and the temperature at the inlet of the high pressure turbine is 1200 K. a) Net power output (kW) ? b) thermal efficiency ? c) Calculate the temperature (K) of the air at states 2, 3, 5, 6 and 7. find it
In an air-standard Brayton cycle the air enters the compressor at 0.1 MPa and 15°C. The pressure leaving the compressor is 1.0 MPa, and the maximum temperature in the cycle is 1100°C. Determine the pressure and temperature at each point in the cycle and the compressor work, turbine work, and cycle efficiency. For each of the control volumes analyzed, the model is ideal gas with constant specific heat, at 300 K, and each process is steady state with no kinetic or potential energy changes
Carbon dioxide gas is compressed at steady state from a pressure of 22 lbf/in2 and a temperature of 32°F to a pressure of 50 lbf/in2 and a temperature of 110°F. The gas enters the compressor with a velocity of 30 ft/s and exits with a velocity of 80 ft/s. The mass flow rate is 4000 lb/hr. The magnitude of the heat transfer rate from the compressor to its surroundings is 5% of the compressor power input. Use the ideal gas model with cp = 0.21 Btu/lb·oR and neglect potential energy effects.Determine the flow area at the inlet, in ft2, and the power required by the compressor to work, in horsepower.
Steam at 44 bar and a dryness fraction, x = 0.9 is throttled to a pressure of 12 bar. Calculate thedifference in power output in kilowatts between the following two expansion processes:a) Steam at the initial pressure of 44 bar and x = 0.9 at State 1 is expanded in a turbine to State 3 at 0.12 bar.b) Steam at the reduced pressure of 12 bar after throttling at State 2 is expanded in another turbine to State 4 at the same exhaust pressure of 0.12 bar.The mass flow rate of steam is 8 kg/sec in both cases and the expansion in both turbines can be assumed to be reversible and adiabatic. Sketch both expansion processes on the same T-s diagram using the respective initial and final state points as described above.Explain the reason for the difference in power output.Calculate the mass flow rate of steam for the turbine operating at the throttled/reduced pressure to generate the same output as the turbine operating at the pressure before throttling.NOTE: You are required to number the state…
Air enters the turbine of a gas turbine at 1200 kPa, 1200 K, and expands to 100 kPa in two stages. Between the stages, the air is reheated at a constant pressure of 350 kPa to 1200 K. Both turbines have same isentropic efficiency 85% Determine, in kJ per kg of air flowing (a) the work developed by each stage. (b) the heat transfer for the reheat process. (c) the increase in net work as compared to a single stage of expansion with no reheat
Air is drawn into a gas turbine working on constant pressure cycle at 1 bar, 21 ℃ and compressed to 5.7 bar. The temperature at the end of heat supply is 680 ℃. Taking expansion and compression to be adiabatic where k = 1.4, calculate the heat energy supplied per kg at constant pressure. Select one: Air is drawn into a gas turbine working on constant pressure cycle at 1 bar, 21 ℃ and compressed to 5.7 bar. The temperature at the end of heat supply is 680 ℃. Taking expansion and compression to be adiabatic where k = 1.4, calculate the heat energy supplied per kg at constant pressure. a. 489 kJ/kg b. 501 kJ/kg c. 472 kJ/kg d. 389 kJ/kg a. 489 kJ/kg b. 501 kJ/kg c. 472 kJ/kg d. 389 kJ/kg
Figure shows a simple vapor power plant operating at steady state with water as the working fluid. Data at key locations are given on the figure. The mass flow rate of the water circulating through the components is 109 kg/s. Stray heat transfer and kinetic and potential energy effects can be ignored. Determine: (a) the mass flow rate of the cooling water, in kg/s. (b) the thermal efficiency. (c) the rates of entropy production, each in kW/K, for the turbine, condenser, and pump. (d) Using the results of part (c), place the components in rank order, beginning with the component contributing most to inefficient operation of the overall system. verl