Suppose 8.50 x 10 ) of energy are transferred to 1.79 kg of ice at 0°C. The latent heat of fusion and specific heat of water are L, = 3.33 x 10° J/kg and c = 4186 (kg . °C) HINT (a) Calculate the energy (in J) required to melt all the ice into liquid water. (Enter your answer to at least three significant figures.) (b) How much energy (in J) remains to raise the temperature of the liquid water? (Enter your answer to at least three significant figures.) (c) Determine the final temperature of the liquid water in Celsius. °C

Suppose 8.50 x 10 ) of energy are transferred to 1.79 kg of ice at 0°C. The latent heat of fusion and specific heat of water are L, = 3.33 x 10° J/kg and c = 4186 (kg . °C) HINT (a) Calculate the energy (in J) required to melt all the ice into liquid water. (Enter your answer to at least three significant figures.) (b) How much energy (in J) remains to raise the temperature of the liquid water? (Enter your answer to at least three significant figures.) (c) Determine the final temperature of the liquid water in Celsius. °C

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter21: Heat And The First Law Of Thermodynamics

Section: Chapter Questions

Problem 71PQ

See similar textbooks

Similar questions

Consider the latent heat of fusion and the latent heat of vaporization for H2O, 3.33 105 J/kg and 2.256 106 J/kg, respectively. How much heat is needed to a. melt 2.00 kg of ice and b. vaporize 2.00 kg of water? Assume the temperatures of the ice and steam are at the melting point and vaporization point, respectively. (a). UsingEq21.9, Q = mLF = (2.00 kg) (3.33l05 J/kg) = 6.66105 J (b).UsingEq21.10. Q = mLV = (2.00kg) (2.256106 J/kg) = 14.51106 J
One of a dilute diatomic gas occupying a volume of 10.00 L expands against a constant pressure of 2.000 atm when it is slowly heated. If the temperature of the gas rises by 10.00 K and 400.0 J of heat are added in the process, what is its final volume?
For the human body, what is the rate of heat transfer by conduction through the body's tissue with the following conditions: the tissue thickness is 3.00 cm, the difference in temperature is 2.00 , and the skin area is 1.50 m2. How does this compare with the average heat transfer rate to the body resulting from an energy intake of about 2400 kcal per day? (No exercise is included.)
In 1993, the U.S. government instituted a requirement that all room air conditioners sold in the United States must have an energy efficiency ratio (EER) of 10 or higher. The EER is defined as the ratio of the cooling capacity of the air conditioner, measured in British thermal units per hour, or Btu/h, to its electrical power requirement in watts. (a) Convert the EER of 10.0 to dimensionless form, using the conversion 1 Btu = 1 055 J. (b) What is the appropriate name for this dimensionless quantity? (c) In the 1970s, it was common to find room air conditioners with EERs of 5 or lower. State how the operating costs compare for 10 000-Btu/h air conditioners with EERs of 5.00 and 10.0. Assume each air conditioner operates for 1 500 h during the summer in a city where electricity costs 17.0 per kWh.
For a temperature increase of 10 at constant volume, what is the heat absorbed by (a) 3.0 mol of a dilute monatomic gas; (b) 0.50 mol of a dilute diatomic gas; and (c) 15 mol of a dilute polyatomic gas?
Why is a person able to remove a piece of dry aluminum foil from a hot oven with bare fingers, whereas a burn results if there is moisture on the foil?
One way to keep the contents of a garage from becoming too cold on a night when a severe subfreezing temperature is forecast is to put a tub of water in the garage. If the mass of the water is 122 kg and its initial temperature is 24.2°C, how much energy must the water transfer to its surroundings in order to freeze completely? The specific heat of water is 4186 J/kg·K, and the latent heat of fusion is 333 kJ/kg.
An insulated beaker with negligible mass contains liquid water with a mass of 0.335 kgkg and a temperature of 65.0 ∘C∘C . How much ice at a temperature of -18.3 ∘C∘C must be dropped into the water so that the final temperature of the system will be 20.0 ∘C∘C ? Take the specific heat of liquid water to be 4190 J/kg⋅KJ/kg⋅K , the specific heat of ice to be 2100 J/kg⋅KJ/kg⋅K , and the heat of fusion for water to be 3.34×105 J/kgJ/kg .
A 56 kW electric furnace measures 1.2m x 1.3m x 0.7m. When the temperature inside the furnace is 1613 ºC, a block of aluminum with a mass of 283 kg and a temperature of 18 ºC is placed inside. Assuming the heat loss from the furnace walls is 529 W/m, how long (in min) will it take to heat the block to the furnace temperature? (Specific heat of aluminum is 0.90 kJ/kg. K)
Consider a flat-plate solar collector placed on the roof of a house. The temperatures at the inner and outer surfaces of the glass cover are measured to be 33°C and 31°C, respectively. The glass cover has a surface area of 2.5 m2, a thickness of 0.6 cm, and a thermal conductivity of 0.7 W/m·K. Heat is lost from the outer surface of the cover by convection and radiation with a convection heat transfer coefficient of 10 W/m2·K and an ambient temperature of 15°C. Determine the fraction of heat lost from the glass cover by radiation.
On a hot dry day, evaporation from a lake has just enough heat transfer to balance the 1.00 kW/m2 of incoming heat from the Sun. What mass of water evaporates in 1.00 h from each square meter?
Water with a mass of mW = 0.400 kg and temperature of TW = 18.5°C is poured into an insulated bucket containing mI = 0.11 kg of ice at a temperature of TI = -18°C. Assume the specific heats of ice and water are constant at cI = 2.10×103 J/(kg⋅°C) and cW = 4.19×103 J/(kg⋅°C), respectively. The latent heat of fusion for water is Lf = 334×103 J/kg. What is the final temperature of the mixture, in degrees Celsius?