The BOD, of a waste sample, was found to be 40.0 mg/L. The initial oxygen concentration of the BOD dilution water was equal to 9 mg/L. the DO concentration measured after incubation was equal to 2.71 mg/L, and the size of the sample used was equal to,l0 mL. If the volume of the BOD bottle used was equal to 300 ml, estimate the initial DO concentration in the waste sample.

The BOD, of a waste sample, was found to be 40.0 mg/L. The initial oxygen concentration of the BOD dilution water was equal to 9 mg/L. the DO concentration measured after incubation was equal to 2.71 mg/L, and the size of the sample used was equal to,l0 mL. If the volume of the BOD bottle used was equal to 300 ml, estimate the initial DO concentration in the waste sample.

Solid Waste Engineering

3rd Edition

ISBN:9781305635203

Author:Worrell, William A.

Publisher:Worrell, William A.

Chapter2: Municipal Solid Waste Characteristics And Quantities

Section: Chapter Questions

Problem 2.14P

See similar textbooks

Similar questions

For a BOD analysis, 30 ml of waste with a DO of zero mg/L, is mixed with 270 ml of dilution water with a DO of 9 mg/L. The sample is then put in an incubator. The final DO is measured after 7 d. The final DO is measured at 3.0 mg/L. However, it is discovered that the incubator was set at 30°C. Assume a k1 of 0.2 d–1 (base e) at 20°C and θ = 1.05. Determine the 5 d, 20°C BOD of the sample
A mixture consisting of 30 mL of waste and 270 mL of seeded dilution water has an initial DO of 8.55 mg/L; after five days, it has a final DO of 2.40 mg/L. Another bottle containing just the seeded dilution water has an initial DO of 8.75 mg/L and a final DO of 8.53 mg/L. Find the five-day BOD of the waste.
1. A mixture consisting of 30 mL of waste and 270 mL of seeded dilution water has an initial Do of 8.55 mg/L; after 5 days, it has a final DO of 2.40 mg/L. Another bottle containing just the seeded dilution water has an initial DO of 8.75 mg/L and a final DO of 8.53 mg/L. Find the 5-days BOD of the waste.
A waste with a 5-day BOD (BOD)=200mg/L and k = 0.1 day¹ is discharged to a river at a rate of 1 m/s. The river has flow rate of 9 m/s and a background ultimate BOD (Lo) of 2 mg/L upstream of the discharge. (a) Calculate the ultimate BOD (Le) of the waste. (b) Furthermore, assuming instantaneous mixing after discharge, calculate Lo of the river water after it has received the waste. Ans.: (a) Ultimate BOD of wastewater = 508.3 mg/L, (b) Ultimate BOD of river water after discharge of waste-52.63 mg/L.
Environmental Engineering Lab what is the Standard test method to determine biochemical oxygen demand of a given water sample Please add your answer this : Theory Significance Guidelines Apparatus / ChemicalsUsed Procedure
a) How can you determine chloride content in a waste water sample? Subject: environmental engineering lab
A BOD test is run using 100mL of treated wastewater. The initial DO of the mixture after diluting the waste sample with distilled water is 9.0mg/L. After 5-day incubation, the DO measured was 4.0mg/L. After a long period of time, the DO is 2.0mg/L and no longer seems to be decreasing. Assume that nitrification has been inhibited. Determine the following: a)BOD5 & BODu of the waste sample b) BOD5 of the mixture and c) k THANK YOU
The results of a jar test on a surface water supply sample revealed that the optimum dose of alum (Al2(SO4)3.14H2O) as coagulant is 17 mg/L. Furthermore, the water has total alkalinity = 50 mg/L as CaCO3; pH = 7.8; and residual turbidity at optimum alum dose = 4 NTU. The water treatment plant has a mean flow of 10m3/hour. Determine: The kg of alum per year needed in the operation of the plant. The residual alkalinity in the sample, following the addition of alum at optimum dose. Solve parts (a) and (b) if instead of alum, ferric chloride (FeCl3) were used as coagulant. Assume the numerical jar test results are the same as those with alum.
5 ml wastewater is added to a 333 ml BOD flask. The initial dissolved O2 concentration was 13 mg/l and final dissolved O2 concentration was 4 mg calculate the BOD?
A 50 mL of wastewater sample was brought to the lab and filtered out to measure the solids concentration. The weights of filter paper before, and after filtration (with solids) are 0.182 g and 0.197 g, respectively. The weights of aluminum cup tare before, and after dry (with solids on filter paper) are 100.08 g and 100.76 g, respectively. What is the total suspended solids concentration (TSS), in mg/L or grams/liter (or, other units)? Show your math-work.
An air classifier is applied to separate a mixture of four solid waste components shown in Figure 5-20 above. All four components have equal mass.a) Determine the mass composition in percent of the four components in theoverflow (extract) if the air classifier is operated at an air velocity of 1,000 ft/min.b) Determine the mass composition in percent of the four components in theoverflow (extract) if the air classifier is operated at an air velocity of 2,000 ft/min
A BOD analysis was begun on Monday. Fifteen ml of waste with a DO of zero was mixed with 270 mL of dilution water with a DO of 9 mg/L. The sample was then put in the incubator. Since the 5th day fell on a long weekend (Friday) and lab personnel do not work on Saturday, the final DO did not get measured until Monday, the eighth day. The final DO was measured at 2.8 mg/L. However, it was discovered that the incubator was mistakenly set at 32 ºC. Assume k is 0.15 day-1 at 20 ºC and θ= 1.05. Determine the 5-day 20 ºC BOD of the sample. Also, what is the ultimate CBOD at 32 ºC and 20 ºC; Will it vary?