The center of the 200-lb wheel has velocity of 2 ft/s at the position shown as it rolls down the incline. The wheel has a radius of 6 inches and a radius of gyration of 4 inches about its centroid/center of mass. Assume that no slipping occurs. Find the normal force on the wheel from the ground the moment it passes point A. !30° 24" 12"

The center of the 200-lb wheel has velocity of 2 ft/s at the position shown as it rolls down the incline. The wheel has a radius of 6 inches and a radius of gyration of 4 inches about its centroid/center of mass. Assume that no slipping occurs. Find the normal force on the wheel from the ground the moment it passes point A. !30° 24" 12"

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The rod AB is non-uniform with a radius of gyration of 4.00 ft with respect to a horizontal axis through the center of mass G. It weighs 161 lb. At the moment shown the rod has a counterclockwise angular velocity of 3.00 rad/sec, and the spring is compressed by 2.00 ft. Calculate the force constant of the spring that will reduce the angular velocity of the rod to 1.50 rad/sec when it reaches the horizontal position. Assume the blocks A and B are weightless.
The body and bucket of a skid steer loader has a weight of 2000 lb, and its center of gravity is located at G. Each of the four wheels has a weight of 100 lb and a radius of gyration about its center of gravity of 1ft. If the engine supplies a torque of M = 100 lb ft to each of the rear drive wheels, determine the speed of the loader in t = 10 s starting from rest. The wheels roll without slipping
Each of the two links has a mass of 2 kg and a centroidal radius of gyration of 60mm. The slider at B has a mass of 3 kg and moves freely in the vertical guide. The springhas a stiffness of 6 kN/m. If a constant torque M = 20 N∙m is applied to link OA throughits shaft at O starting from the rest position at θ = 45°, determine the angular velocity ofOA when θ = 0.
The racing vehicle has a mass of 750 kg and center of mass in G. If there is no slippage, determinate the normal reaction, in Newtons, presented on each of the front wheels in A, when an acceleration of a = 6.4 m/s².
At the instant shown, the 200-lb bar rotates clockwise at 4 rad/s. The spring attached to its endalways remains vertical due to the roller guide at C. If the spring has an unstretched length of 2ft and a stiffness of k = 9 lb/ft, determine the angular velocity of the bar the instant it has rotated 39° clockwise.
Determine the gyroscopic couple, if the ship travels at 2 km/min and steer to the right in a curve of 65 m radius.The turbine rotor of a ship has a mass of 10tonnes and a radius of gyration 1.5 m. It rotates at 38r.p.s. anticlockwise, when looking from the stern and write the reactive gyroscopic effect.
5kg plate, and 3 kg slender rod. FIND, the radius of gyration of the pendulum about an axis perpendicular to the screen and passing through the point G.
The 31-kg reel is mounted on the 16-kg cart. Part A: If the cable wrapped around the inner hub of the reel is subjected to a force of P=50N, determine the velocity of the cart when t = 4.2 s. The radius of gyration of the reel about its center of mass O is kO=250mm. Neglect the size of the small wheels. Part B: Determine the angular velocity of the reel when t = 4.2 s.
if mass (m)=345kg radius of gyration kG = 0.54 m θ= 200 degree 1) assuming no slipping and when starting from horizontal cable (θ = 0o) the spool moves to the left- determine the minimum tension in the cable (Tmin) that causes the spool to slip. Assumeμk = 0.4 and μs = 0.5.
The mass of gear A is 25 kg and its centroidal radius of gyration is 105 mm. The mass of gear B is 13 kg and its centroidal radius of gyration is 85 mm. Calculate the angular acceleration of gear B when a torque of 16 N·m is applied to the shaft of gear A. Neglect friction. The angular acceleration is positive if counterclockwise, negative if clockwise..
The 23-kg wheel has a radius of gyration about its center O of kO = 300 mm. When it is subjected to a couple moment of M = 50 N⋅m, it rolls without slipping. Determine the angular velocity of the wheel after its center O has traveled through a distance of sO = 20 m, starting from rest.
The uniform slender beam has a total mass of M and rotates freely at the indicated suspension point O. The horizontal beam section has a length of 2/3L and the vertical section has a length of 1/3L. The beam is released from the drawn position a) Draw the full-body diagram.b) Draw the kinematic diagram.c) determine the centre of gravity of the beamd) set up the necessary motion equationse) determine the angular acceleration of the beam (in g/L)f) determine the resulting force in the suspension point O. (leave the mg terms)