The copper shaft is subjected to the axial loads shown.(Figure 1)Figure8 kipA80 in.5 kip5 kip B-150 in.--100 in.-2 kipC 2 kipD6 kip< 1 of 1 >Part ADetermine the displacement of end A with respect to end D if the diameters of each segment are dAB = 0.85 in., dpc = 0.9 in., and dcp = 0.55 in. Take Ecu = 18(10³) ksi.Express your answer to three significant figures and include the appropriate units.SA/D = ValueSubmitHÅProvide Feedback3Request AnswerUnitswww.?

Answered: Image /qna-images/answer/0408c501-fb69-4d18-b25e-1dcc41705eea.jpg

The copper shaft is subjected to the axial loads shown. (Figure 1) Figure 8 kip 80 in.150 in 5 kip A Skip B 100 in- 2 kip C 2 kip D 6 kip 1 of 1 > Part A Determine the displacement of end A with respect to end D if the diameters of each segment are dA=0.85 in., duc = 0.9 in., and dep=0.55 in. Take E = 18(10³) ksi. Express your answer to three significant figures and include the appropriate units. SA/D = Value Submit μÀ h Provide Feedback Request Answer → C Units ?

The copper shaft is subjected to the axial loads shown. (Figure 1) Figure 8 kip 80 in.150 in 5 kip A Skip B 100 in- 2 kip C 2 kip D 6 kip 1 of 1 > Part A Determine the displacement of end A with respect to end D if the diameters of each segment are dA=0.85 in., duc = 0.9 in., and dep=0.55 in. Take E = 18(10³) ksi. Express your answer to three significant figures and include the appropriate units. SA/D = Value Submit μÀ h Provide Feedback Request Answer → C Units ?

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter1: Tension, Compression, And Shear

Section: Chapter Questions

Problem 1.7.10P: Three round, copper alloy bars having the same length L but different shapes are shown, in the...

See similar textbooks

Similar questions

A tubular shaft being designed for use on a construction site must transmit 120 kW at 1,75 Hz, The inside diameter of the shaft is to be one-half of the outside diameter. If the allowable shear stress in the shaft is 45 MPa, what is the minimum required outside diameter d?
A retaining wall (Fig. a) is constructed using steel W-shape columns and concrete panel infill (Fig, b). Each column is subjected to lateral soil pressure with peak intensity q0(Figs, b and c). The tensile and compressive strength of the beam is 600 MPa. Select the most economical W 360 section from Table F-l(b) based on safety factor of 3.0.
Repeat Problem 11.2-14 using L = 12 ft, ß = 0.25 kips/in., ßRl= 1.5ßL2, and ßR2= 2 ßR1.
A square tube section has side dimension of 20 in. arid thickness of 0.5 in. If the section is used for a 10-ft-long beam subjected to 1250 kip-in, torque at both ends, calculate the maximum shear stress and the angle of twist between the ends. Use G = 11,600 ksi.
A steel punch consists of two shafts: upper shaft and lower shaft. Assume that the upper shaft has a diameter d1= 24 mm and the bottom shaft has a diameter d2= 16 mm. The punch is used to insert a hole in a 4 mm plate, as shown in the figure. If a force P - 70 kN is required to create the hole, what is the average shear stress in the plate and the average compressive stress in the upper and lower shaft of the punch?
A pinned-end column with a length L = 18 ft is constructed from a W12 x 87 wide-flange shape (sec figure). The column is subjected to a centrally applied load P1=180 kips and an eccentrically applied load P2=15 kips. The load P2acts at a distance s = 5.0 in. from the centroid of the cross section. The properties of the steel arc E = 29,000 ksi and y = 36 ksi. Calculate the maximum compressive stress in the column. Determine the factor of safety with respect to yielding.
Solve the preceding problem for an aluminum column with b = 6,0 in., t = 0.5 in., P = 10 kips, and E = 10.6 × 106 ksi. The defied ion at the top is limited to 2.0 in.
A steel pipe column with pinned ends supports an axial load P = 21 kips. The pipe has outside and inside diameters of 3.5 in. and 2.9 in., respectively. What is the maximum permissible length Lmaxof the column if E = 29,000 ksi and y = 36 ksi?
A copper alloy pipe with a yield stress aY= 290 MPa. is to carry an axial tensile load P = 1500 kN (see figure part a). Use a factor of safety of 1.8 against yielding. (a) If the thickness t of the pipe is one-eighth of its outer diameter, what is the minimum required outer diameter dmin? (b) Repeat part (a) if the tube has a hole of diameter dt 10 drilled through the entire tube, as shown in the figure part b.
A full quarter-circular fillet is used at the shoulder of a stepped shaft having diameter D2= 1.0 in. (see figure), A torque T = 500 lb-in. acts on the shaft. Determine the shear stress at the stress concentration for values as follows: D1= 0.7,0.8, and 0.9 in. Plot a graph showing versus D?
A pinned-and column of a length L = 2A m is constructed of steel pipe (E = 210GPa) having an inside diameter d1= 60 mm and outside diameter d2= 68 mm (sec figure). A compressive load p = 10 kN acts with eccentricity e = 30 mm. What is the maximum compressive stress max in the column? If the allowable stress in the steel is 50 MPa, what is the maximum permissible length Lmaxof the column?
A steel column ( E = 30 X 103 ksi) that is fixed at the base and free at the top is constructed of a W8 x 35 wide-flange member (sec figure). The column is 9.0 ft long. The force P acting at the top of the column has an eccentricity e = 1.25 in. If P = 40 kips, what is the maximum compressive stress in the column? If the yield stress is 36 ksi and the required factor of safety with respect to yielding is 2.1, what is the allowable load Pallow?