The hydrometer shown in Figure below is a device for measuring the specific gravity of liquids. The bulb contains lead shot, and the specific gravity can be read directly from the liquid level on the stem after the hydrometer has been calibrated. The volume of the bulb is 20 mL, the stem is 15 cm long and has a diameter of 5.00 mm, and the mass of the glass is 6.0 g. (a) What mass of lead shot must be added so that the lowest specific gravity of liquid that can be measured is 0.9? (b) What is the maximum specific gravity of liquid that can be measured?

The hydrometer shown in Figure below is a device for measuring the specific gravity of liquids. The bulb contains lead shot, and the specific gravity can be read directly from the liquid level on the stem after the hydrometer has been calibrated. The volume of the bulb is 20 mL, the stem is 15 cm long and has a diameter of 5.00 mm, and the mass of the glass is 6.0 g. (a) What mass of lead shot must be added so that the lowest specific gravity of liquid that can be measured is 0.9? (b) What is the maximum specific gravity of liquid that can be measured?

Name: The hydrometer shown in Figure below is a device for measuring the sp
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: The hydrometer shown in Figure below is a device for measuring the specific gravity of liquids. The bulb contains lead shot, and the specific gravity can be read directly from the liquid levelon the stem after the hydrometer has been calibrated. The

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A cylindrical disk ofwood weighing 45.0 N and having adiameter of 30.0 cm floats on a cylinderof oil of density 0.850 g /cm3(Fig.). The cylinder of oilis 75.0 cm deep and has a diameterthe same as that of the wood.(a) What is the gauge pressure at thetop of the oil column? (b) Supposenow that someone puts a weightof 83.0 N on top of the wood, butno oil seeps around the edge of thewood. What is the change in pressureat (i) the bottom of the oil and(ii) halfway down in the oil?
A bottle consisting of a cylinder 30 cm in diameter and 30 cm high has a neck 5 cm in diameter and 30 cm long. If the bottle, filled with air under normal atmospheric condition, is inverted and submerged in water until the neck is just filled with water, find the depth to which the open end is submerged. Neglect vapor pressure.
A closed tank contains 1.5 m of SAE 30 oil, 1m of water, 20 cm of mercury, and an air pocket in its upper part, all of them at 20 ° C. The absolute pressure at the bottom of the tank is 60 kPa. What is the pressure in the air bag?
Open tank (4.5 m long, 2.5 m height and 3 m wide) contains liquid (S-0.75) to height 1. m. If this tank is accelerated along its length on a horizontal truck at a constant value of 3.5 m/s, determine pressure at the bottom of the tank at front and rear edges (in kN/m). (take y=9.8 kN/m for water)
Discuss the resultant hydrostatic force acting on a submerged surface and the center of pressure. Why do the forces acting on a surface vary when the surface is tilted or in a vertical position?
The pressure at a point “m” in the figure shown was increased from 70 kPa to 105 kPa. This causedthe top level of mercury to move 20 cm in the sloping tube. What is the inclination, θ?
To what height will 68˚F ethyl alcohol rise in a 0.005 in internal diameter glass capillary tube? The density of the alcohol is 49 lbm/ft3 note ? = 0.00156 ???/ ?? and ? = 0°.
For the position indicated in the figure, the pressure gauge indicates zero pressure and the piston touches the spring without compressing it. The spring has a constant of 360 KN/m and the relative density of the oil is 0.85. the diameter of cylinder "A" is 0.7 m and that of cylinder B is 0.5 m. What will be the pressure read on the manometer when the spring is compressed 40 cm?
A bottle consist of a cylinder 35 cm in diameter and 30 cm high and a neck 5 cm in diameter and 30 cm long. The bottle is inserted into a body of water, with the open end of the neck first until the neck is completely filled with water. Assuming the pressure of the atmosphere is standard, and neglecting vapor pressure, what is the depth to which the open end is submerged below the free surface? Show correct figure. Please be clear and write explanation in every solution. Thank you.
Consider a differential manometer whose ends are connected to two different pipes A andB and containing different liquids at different levels. Let us assume that the pressure at point A is more than that at point B. Oil is in pipe A whose density 800 kg/m³ shows a difference in mercury levels as 100 mm. The height of oil between center of pipe A to the mercury level in left limb is 200 mm. Methanol (relative density 0.791) is in pipe B and the height of Methanol between center of pipe B and mercury level in the right limb is 5 cm. Calculate the difference in pressures at the two points A and B.
A bottle consist of a cylinder 35 cm in diameter and 30 cm high and a neck 5 cm in diameter and 30 cm long. The bottle is inserted into a body of water, with the open end of the neck first until the neck is completely filled with water. Assuming the pressure of the atmosphere is standard, and neglecting vapor pressure, what is the depth to which the open end is submerged below the free surface? Show correct figure.
For the inverted manometer shown in the figure, all the fluid are at 20 0C. If PB - PA = 687 kPa, What must the height H be in cm. Take water density = 1000kg/m3 Mercury density = 13600kg/m3