F.yM.mgAF FYf.YFixleAxisThe ladder in the picture has a mass of 39 kilograms and a length 3.4 meters. What isthe normal force pushing the ladder up from the floor? This force is labeled Ff v in thepicture.FNAssume that the ladder's weight is evenly distributed, so it can be treated as a singleforce through the middle. If the ladder is at a 70° angle from the ground, what is thetorque exerted by the weight (using the floor as the pivot point)?N.mThe torque from the ladder must be balanced by the torque caused by the normalforce on the wall, labeled Fw in the picture. Calculate this force.Fw =The normal force from the wall must be balanced by the friction force from the floor,labeled Ff y in the picture Determine thn AFf.yFixef,xAxisThe ladder in the picture has a mass of 39 kilograms and a length 3.4 meters. What isthe normal force pushing the ladder up from the floor? This force is labeled Ff.y in thepicture.FN =N.Assume that the ladder's weight is evenly distributed, so it can be treated as a singleforce through the middle. If the ladder is at a 70° angle from the ground, what is thetorque exerted by the weight (using the floor as the pivot point)?N.m= 1The torque from the ladder must be balanced by the torque caused by the normalforce on the wall, labeled Fw in the picture. Calculate this force.%3DThe normal force from the wall must be balanced by the friction force from the floor,labeled Ffx in the picture. Determine the minimum coefficient of friction to keep theladder from slipping.II

Given:- The mass of the ladder m = 39 kg ' The ladder length L = 3.4 meter The angle by which the…

The ladder in the picture has a mass of 39 kilograms and a length 3 the normal force pushing the ladder up from the floor? This force is picture. FN !3! Assume that the ladder's weight is evenly distributed, so it can be tr force through the middle. If the ladder is at a 70° angle from the gr torque exerted by the weight (using the floor as the niun

The ladder in the picture has a mass of 39 kilograms and a length 3 the normal force pushing the ladder up from the floor? This force is picture. FN !3! Assume that the ladder's weight is evenly distributed, so it can be tr force through the middle. If the ladder is at a 70° angle from the gr torque exerted by the weight (using the floor as the niun

University Physics Volume 1

18th Edition

ISBN:9781938168277

Author:William Moebs, Samuel J. Ling, Jeff Sanny

Publisher:William Moebs, Samuel J. Ling, Jeff Sanny

Chapter12: Static Equilibrium And Elasticity

Section: Chapter Questions

Problem 26P: Find the magnitude of the tension in each supporting cable shown below. In each case, the weight of...

See similar textbooks

Similar questions

A uniform plank of length 2.00 m and mass 26.0 kg is supported by three ropes, as indicated by the blue vectors in the figure below. Find the tension in each rope when a 710–N person is d = 0.500 m from the left end. Answer the 3 boxes below:
Find the magnitude of the tension in each supporting cable shown below. In each case, the weight of the suspended body is 100.0 N and the masses of the cables are negligible.
The walkway ABC of the footbridge is stiffened by adding the cable ADC and the short post of length L. If the tension in the cable is not to exceed 420 lb, what is the smallest value of L for which the 160-lb person can be supported at B?
A man stands a distance d = 0.275 m from the left end of a platform as shown in the figure. The platform is supported by three cables. Find the tension in each cable (in N). Assume the platform is uniform, with length L = 2.00 m and mass 35.0 kg, and the weight of the man is 690 N. (Due to the nature of this problem, do not use rounded intermediate values in your calculations—including answers submitted in WebAssign.) (b). What If? The man now begins to walk to the right. If each of the cables can support a maximum tension of 800 N, which cable fails first? At what location does this occur (measured in m from the left end of the platform)?
From the step ladder shown in the figure, sides AC and CE are each 2.44 m long and hinged at point C. Bar BD is a tie-rod 0.762 m long, halfway up. A man weighing 845 N climbs 1.8 m along the ladder. Assuming the floor is frictionless and neglecting the mass of the ladder, find the tension (in N) in the tie-rod.
A uniform plank of length 2.00 m and mass 30.0 kg is supported by three ropes, as indicated by the blue vectors. Find the tension in each rope when a 700 N person is d = 0.500 m from the left end
In the figure, horizontal scaffold 2, with uniform mass m2 = 29 kg and length L2 = 2.3 m, hangs from horizontal scaffold 1, with uniform mass m1 = 54 kg. A 17 kg box of nails lies on scaffold 2, centered at distance d = 0.80 m from the left end. What is the tension T in the cable indicated?
Two people, let’s call them person A and person B, carry a uniform board of length 6 meters and weight 150 N. Person A is 1 m from one end and person B is 2 m from the other end. What weight does person A support? What weight does person B support?
Two painters are carrying a uniform horizontal ladder that is 12 feet long and weighs 200 N. If one person applies an upward force equal to 85 N at one end, at what point does the other person lift?
The wheels,axle, and handles of a wheelbarrow weigh W=56N. The load chamber and it’s contents weigh WL=635N.the drawing shows these two forces in two different wheelbarrow designs. To support the wheelbarrow in equilibrium, the man’s hands apply a force to the handles that is directed vertically upward.consider a rotational axis at the point where the tire contacts the ground, directed perpendicular to the plane of the paper.find the magnitude of the man’s force for both designs.
To tighten a spark plug, it is recommended that a torque of15 N # m be applied. If a mechanic tightens the spark plug with awrench that is 25 cm long, what is the minimum force necessaryto create the desired torque?
a ladder 4m long is leaning against a frictionless wall with its lower end 1.6m away from the wall. if the ladder weighs 150n, what forcesdoes it exert on the wall F1 and on the ground F2? show step by step solution with fbd