The “power cube” transformer for a portable CD player has an output of 4.5 V and 600 mA (both rms) when plugged into a 120 V outlet.a. If the primary coil has 400 turns of wire, how many turns are on the secondary coil?b. What is the peak current in the primary coil?

Q: •• An ac generator with a frequency of 1.55 kHz and an rms voltage of 20.8 V is connected in series…

A: Given data: *The given frequency is f = 1.55 kHz = 1.55 × 103 Hz *The rms voltage is vrms = 20.8 V…

Q: A single 50 mH inductor forms a complete circuit when connected to an ac voltage source at 120 V and…

A: Given that:L=50 mH=50×10-3 HVo=120 Vf=60 Hz

Q: The 335-kV ac electricity from a power transmission line is fed into the primary winding of a…

A:

Q: A step-up transformer connected to a 200 V line is used to supply a hydrogen-gas discharge tube with…

A: here we use power = Vrms x Irms P = VI = constant

Q: A transformer is used to supply a 12-V model trainwith power from a 110-V wall plug. The train…

A: Given:Vp(primary winding voltage)=110 VVs(secondary winding voltage)=12 VPout(output power)=50 WNow,…

Q: A 20kVA closer transformer located inside a building is used to step down the voltage for the…

A: a) Voltage provided:     V21 = 4800 / 20 = 240 V     V22 = 4800 / 40 = 120 V   b) Current provided :…

Q: A step-up transformer connected to a 110-V line is used to supply a hydrogen-gas discharge tube with…

A: Given: Vp=110 VVs=5.0 kV =5*103 VPout=70 W

Q: A step-up transformer connected to a 110-V line is used to supply a hydrogen-gas discharge tube with…

A: a) The ratio of the number of turns in the secondary winding to the number of turns in the primary…

Q: A large power plant generates electricity at 12.0 kV. Its old transformer once converted the voltage…

A: GIVEN : Vold=335 kVVnew=750 kV (a) Ratio of no. of turns in secondary coil : Ns,newNs,old=VnewVold…

Q: An AM radio antenna picks up a 1000 kHz signal with a peak voltage of 5.0 mV. The tuning circuit…

A: (a) The value of the capacitor that to be tuned to listen to the radio station can be determined as…

Q: You need a transformer that will draw 25 W of power from a 220 V (rms) power line, stepping the…

A:

Q: The maximum current in a 22 - µF capacitor connected to an ac generator with a frequency of 120 Hz…

A: Capacitance (C) = 22μFfrequency (f) = 120 Hz Max. Current (I) = 0.15 A Capacitance Reactance (R) =…

Q: A step-up transformer is designed so that the outputof its secondary winding is 2000 V (rms) when…

A: (a) The general equation for the transformer is, VsVp=NsNp Thus, Ns=VsVpNp Substituting the givens,…

Q: A transformer has an input voltage amplitude of 200 V and an input power of - W. The primary side…

A:

Q: An ac source of emf delivers 5.0 mW of power at an rms current of 2.0 mA when it is connected to the…

A: Power, P = 5 mW  primary current, Ip = 2 mA secondary voltage, Vs = 20 V

Q: A transformer steps-up the 120-V rms AC powerline voltage to 23 KV rms for a TV picture tube. If the…

A:

Q: The primary coil of an ideal transformer is connected to a 120 V source and draws 1.0 A. The…

A:

Q: (a) Sketch the phasor diagram for an ac circuit with a 105@Ωresistor in series with a 22.5-mH…

A:

Q: A transformer on a utility pole steps the rms voltage down from 12 kV to 240 V. (a) What is the…

A: Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for…

Q: A 500 mH inductor is connected across an AC generator that produces a peak voltage of 5.0 V.a. At…

A: Given: The inductance is 500 mH. The peak voltage is 5.0 V. The peak current is 50 mA.

Q: An instructor builds a circuit in which an AC power supply with an rms voltage of 240 V is connected…

A:

Q: An 80.0-Ω resistor and a 200-mH inductor are connected in parallel across a 100-V (rms), 60.0-Hz…

A: Given: Resistance = 80 Ohm Inductance value = 200 mH Frequency of the source = 60 Hz Rms voltage =…

Q: A step-down transformer is used for recharging the batteries of portable electronic devices. The…

A: Let V1 and V2 be the primary and the secondary voltages respectively, I1 and I2 be the primary and…

Q: A power plant generator produces 100 A at 15 kV(rms). A transformer is used to step up the…

A: Given: The primary current is Ip=100 A. The primary voltage is Vp=15 kV. The secondary voltage is…

Q: A resistor and an unknown device are connected in series with an AC generator as shown in the…

A: Let total impedance of circuit is  R + j*X.   We know that phase lead = tan-1(X / R)    Total…

Q: A transformer steps the line voltage down from 110 to 9.0 V so that a current of 0.50 A can be…

A:

Q: A microscope illuminator uses a transformer to step down the 120 V AC of the wall outlet to power a…

A: (a) The power is given by, P=V2R Here, V is the voltage and  The resistance of the bulb filament is…

Q: An instructor builds a circuit in which an AC power supply with an rms voltage of 220 V is connected…

A: Given :     rms voltage, Vrms  = 220 V     resistance, R = 2.54 kilo ohm                         R =…

Q: A student builds a circuit in which an AC power supply with an rms voltage of 230 V is connected to…

A: Given: The RMS supply voltage is 230 V. The resistance of the circuit is 2.2 kΩ.

Q: A step-up transformer connected to a 110-V line is used to supply a hydrogen-gas discharge tube with…

A:

Q: The 335 kV AC electricity from a power transmission line is fed into the primary coil of a…

A: Given Data:   The input voltage is, Vp=335 kV The fraction of the numbers of turns in secondary coil…

Q: A 0.80 μF capacitor is connected across an AC generator that produces a peak voltage of 21 V . a.…

A: (a)f=100HzWrite the expression for impedance of the capacitor.

Q: A transformer has an input voltage amplitude of 200 V and an input power of 40 W. The primary side…

A: The relation between the number of turns in primary(Np), number of turns in secondary(Ns),primary…

Q: A neon sign transformer has a 450 W AC output with an rms voltage of 15 kV when connected to a…

A:

Q: A step-up transformer connected to a 190 V line is used to supply a hydrogen-gas discharge tube with…

A: Given values: primary voltage VP = 190 V secondary voltage Vs = 5.6 kV power P = 78 W

Q: A neon sign transformer has a 450 W AC output with an rms voltage of 15 kV when connected to a…

A: Given: The output voltage is V2=15 kV. The power is P=450 W. The number of turns in primary coil is…

Q: A capacitor is connected across an ac generator whose frequency is 750 Hz and whose peak output…

A:

Voltage Across Inductor

An actor is a passive electrical component that consists of a coil bent in the form of wire which uses electromagnetism to produce electric current through the coil. When the electric current flows through a conductor that is the coil, a magnetic flux is developed around the conductor. This flow of current through the coil creates a magnetic field based on Fleming's Right-hand thumb rule. If there is any decrease in the current passing through the inductor, then the magnetic field will also decrease and energy is released through the generation of electric current. There is also a secondary voltage inducing in the same coil due to the magnetic flux, since it opposes any changes in the electric current flowing through the circuit. An inductor is also called choke, coil, or solenoid. A choke is designed to block certain frequencies when the DC current passes. A winding coil is coated with insulation to give extra insulation and protect the circuit. They are usually tightly wrapped around a central core which is cylindrical in nature so that the magnetic flux can be induced. The solenoid is a three-dimension coil that is used to exhibit electromagnetism when the magnetic field is developed due to the current flowing through the coil. The sign convention of the inductor is the same as the power dissipating device. When the current flows into the positive side of the voltage across the inductor, the value is positive and the inductor dissipates power whereas when the inductor releases the power back to the circuit, the current has a negative sign convention.