The results of a constant head permeability test for a fine sand are as follows: Diameter of the sample = 37 cm Length of sample = 92 cm Constant head difference = 78 cm Time of collection = 337 secs Weight of water collected = 375 grams Find the seepage velocity in cm/min. if the void ratio is 0.6. Round off to four decimal places

The results of a constant head permeability test for a fine sand are as follows: Diameter of the sample = 37 cm Length of sample = 92 cm Constant head difference = 78 cm Time of collection = 337 secs Weight of water collected = 375 grams Find the seepage velocity in cm/min. if the void ratio is 0.6. Round off to four decimal places

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter11: Compressibility Of Soil

Section: Chapter Questions

Problem 11.14P

See similar textbooks

21

The results of a constant head permeability test for a fine sand are as follows:

Diameter of the sample = 37 cm

Length of sample = 92 cm

Constant head difference = 78 cm

Time of collection = 337 secs

Weight of water collected = 375 grams

Find the seepage velocity in cm/min. if the void ratio is 0.6. Round off to four decimal places.

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Laboratory determination of hydraulic conductivity

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, civil-engineering and related others by exploring similar questions and additional content below.

Similar questions

Q9) The results of a constant head permeability test for a fine sand are as follows: Diameter of the sample = 31 cm Length of sample = 98 cm Constant head difference = 52 cm Time of collection = 364 secs Weight of water collected = 448 grams Find the seepage velocity in cm/min. if the void ratio is 0.33. Round off to four decimal places.
The results of a constant head permeability test for a fine sand are as follows: Diameter of the sample = 31 cm Length of sample = 98 cm Constant head difference = 52 cm Time of collection = 364 secs Weight of water collected = 448 grams Find the seepage velocity in cm/min. if the void ratio is 0.33. Round off to four decimal places. Answer: 0.3943
Question 40 The results of a constant head permeability test for a fine sand are as follows: Diameter of the sample = 25 cm Length of sample = 80 cm Constant head difference = 77 cm Time of collection = 388 secs Weight of water collected = 340 grams Find the seepage velocity in cm/min. if the void ratio is 0.49. Round off to four decimal places.
16. For a constant laboratory permeability test on a fine sand, the following data are given: Length of specimen: 16 cm. Diameter of specimen: 97 mm. Constant head difference: 51 cm. Volume of water collected in 5.96 min.: 422 cc Void ratio of the soil specimen: 0.58 Determine the seepage velocity in m/min. Round off to four decimal places.
For a falling laboratory permeability test on a fine sand, the following data are given:Length of specimen = 10 cm.Diameter of specimen = 9.5 cm.Diameter of standpipe = 1.5 cm.Head at time is zero = 50 cmHead at time is 4 min = 25 cmDetermine the seepage velocity in cm/min. Use void ratio = 0.55. Round off to three decimal places.
Water flows at the rate of 0.09 ml/s in an upward direction through a sand sample with a coefficient of permeability of 2.7 × 10^–2 mm/s. The thickness of the sample is 120mm and the area of cross-section is 5400 mm2. Taking the saturated unit weight of the sand as 18.9 kN/m3, determine the effective pressure in Pa at the middle of the sample. a. 364 b. 910 c. 182 d. 728
Situation 2 - For a constant laboratory permeability test on a fine sand, the following data are given:Length of specimen = 16 cmDiameter of specimen = 96 mmConstant Head Difference = 50 cmVolume of water collected in 4 min = 420 ccVoid ratio of the soil specimen = 0.55Determine the seepage velocity in m/min. Round off to four decimal places.
Water flows at the rate of 0.09 ml/s in an upward direction through a sand sample with a coefficient of permeability of 2.7 × 10^–2 mm/s. The thickness of the sample is 120 mm and the area of cross-section is 5400 mm2. Taking the saturated unit weight of the sand as 18.9 kN/m3, determine the effective pressure in Pa at the bottom of the sample. a. 364 b. 728 c. 182 d. 910
In a constant head test, the sample of sand was collected 150 cm3 of water in just two minutes. The diameter is 5.08 centimeters, the length was 10 centimeters, and the head was maintained at 20 cm. 1) Determine the coefficient of permeability (Ans. 3.08 x 10-2 cm/s) 2) Determine the kind of soil (Ans. Coarse Sand) 3) Determine the interstitial velocity if n=0.3 (Ans. 0.21 cm/s)
For a constant head permeability test in a sand, the following values are given:• L 350 mm• A 125 cm2• h 420 mm• Water collected in 3 min 580 cm3• Void ratio of sand 0.61Determine:a. Hydraulic conductivity, k (cm/sec)b. Seepage velocity
From the constant head permeability test arrangement shown, the following values are given: Void ratio of specimen = 0.46 Length of Soil Sample = 450mm Constant head difference = 700mm Water collected in a period of 3 min = 0.000354 m3 Cross-sectional Area of Soil Sample = 0.00226 m2 Determine the coefficient permeability in m/hour (Ans: 2.102 m/hr) Compute the discharge of velocity in m/min. (Ans: 0.052 m/min) Compute the seepage velocity in m/min. (Ans: 0.165 m/min)
The results of a constant head permeability test for a fine sand are as follows: Diameter of the sample = 41 cm Length of sample = 66 cm Constant head difference = 30 cm Time of collection = 473 secs Weight of water collected = 416 grams Find the seepage velocity in cm/min. if the void ratio is 0.43.