The roof system of a building consists of 100 mm thick reinforced concrete slab (weight density= 23.6 kN/m²) resting on four steel beams (A=10,000 mm²), which are supported by two girders (A-30,000mm³). The weight density of steel is 77.3 kN/m². The girders, in turn, are supported by four columns. Determine the magnitude of the axial load acting on column A. Answer in kN rounded-off to two decimal places. Steel girder H Steel floor beam a = 6.5 meters b = 2.4 meters H- G a D F H -Steel column -100 mm thick concrete slab 3@b

The roof system of a building consists of 100 mm thick reinforced concrete slab (weight density= 23.6 kN/m²) resting on four steel beams (A=10,000 mm²), which are supported by two girders (A-30,000mm³). The weight density of steel is 77.3 kN/m². The girders, in turn, are supported by four columns. Determine the magnitude of the axial load acting on column A. Answer in kN rounded-off to two decimal places. Steel girder H Steel floor beam a = 6.5 meters b = 2.4 meters H- G a D F H -Steel column -100 mm thick concrete slab 3@b

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

38% @ 10:26 ص ZAIN IQ II.. A docs.google.com Q1: The horizontal rigid beam ABCD is supported by vertical bars BE and CF and is loaded by vertical forces P = 400 kN and P2 = 360 kN acting at points A and D, respectively (see figure). Bars BE and CF are made of steel (E = 200 GPa) and have cross-sectional areas ABE = 11,100 mm? and AcF = 9,280 mm?. The distances between various points on the bars are shown in the figure. Determine the vertical displacements dA and dp of points A and D, respectively. E1.5 m 1.5 m – 2.1 m- A B P = 400 kN 2.4 m P2 = 360 kN 0.6 m| E مع اجابة السؤال الأول من هنا طلب الإذن بالتعدیا
A floor system in a small building consists of wood plans supported by 50mm (nominal width) joists spaced at a distance of 0.40 m, measured center to center. The span length of each joist is 3.2 m. The uniform load carried is 5.8 kPa which includes the weight of the floor system. (Do not consider reduction of capacity of the beam) What is the cost of timber beams in a 2 meters span of floor (hint: determine how many beams in 2 meters span), , if the price of the timber is Php 65.00 / boardft.?
Solve the following problems, Show your detailed solutions and picture of your answer sheets must be uploaded on or before the time set in the google classroom. 1. A reinforced concrete beam 400mm by 600mm is reinforced with 4-25mm ø bars placed in one layer. The steel covering up to the centroid of the steel bars is 65mm. This beam has simple span of 9m and carries three moving loads 50kN each, the middle load is 2.5m from the left load and 3m from the rightmost load. f'c= 20 MPa, fs=124MPA, n= 12, v= 0.4 MPa, u= 1.40 MPa Neglecting its own weight, a. determine the moment capacity of the beam. b. Is it safe to carry the moving loads considering moment? c. Is it safe to carry the moving loads considering shear? d. Is it safe to carry the moving loads considering bond?
An eight Storey city library is proposed to be constructed in Baguio. The structure shall be a reinforced concrete building (no shear walls). The weight per floor (including 1st floor) is estimated to be 1800 KN. The roof deck weighs 1700 KN. Solve for the Base Shear, V, for the condition above using the following formulas: 1. V =ZICKSW (SEAOC CODE 1974 - 4 TH Revision) Adopted by National Structural Code of the Philippines, 3rd edition (NSCP 1987) 2. V = ZICW/Rw National Structural Code of the Philippines, 4th edition (NSCP 1992), Volume I 3. Most critical formula for V as indicated in Sec. 208.5.2 of the NSCP Vol.1 5th edition (2001). 4. Most critical formula for V as indicated in the NSCP Vol.1 6th edition (2015). 1700 KN 100 KN 32 1800 KN La Tide Toeang Warg 32 1800 KN 32 259 32 1800 KN 32 1800 KN City Cam Cena, Nagun C Bengt Nearet Active failt Trace t Fae tunao Fa Segnet Nane Tut Fat Vear Maper 2012 Ma t et 10 00 32 1800 KN 3.5 20 Floor height: 1st floor 3.5m and the rest of the…
Given the following rectangular (35 ft x 45 ft) two-story warehouse and loading shown, determine the effective weight at the roof and first floor and the total weight of the structure 2 ft Roof 14 ft 1st level 16 ft Base ▪ Roof DL = 55 psf Floor DL = 65 psf I ■ ■ Wall DL = 35 psf Floor LL = 250 psf (storage) I ▪ SL = 50 psf >k effective, rood effective, 1 ||| W₂ W₁
Determine the losses in the post-tensioned concrete beam as shown below. 560 mm Given: POST-TENSIONED BEAM with A PARABOLIC TENDON PROFILE Span Length = 20 m fi = 1200 N/mm² A, = 2850 mm² Ac 4.23x105 mm² 1=9.36x10¹0 mm e-560 mm (@midspan, from N.A.) fc= 40 N/mm² Es = 210,000 N/mm² μ = 0.19 K = 0.0005 (per meter) Anchorage slip = 5 mm (jacked at left-end only). (make sure to draw the force variation diagram for anchorage slip) V/S= 6 RH = 70 Dead Load 9.97 kN/m fpy = 1714 N/mm² Bridge Width III
The intensity of load effect on the structure is based on A. Load factor B. Load effect C. Return period C. All answer are wrong
What is the total weight of this building? Level Roof 3rd The following shows a schematic section of a three-story reinforced concrete building. The building weights, elevations and seismic story forces are shown in the table below. 2 Fo=1200 k Fard 800 k F400 k Story Weight (kip) 3,000 k 4,000 k 4,000 k 11,000k Elevation (ft) 42 30 Building Elevation and Seismic Story Forces 15 4,000 kips 8,000 kips 11,000 kips 12,000 kips Story force, F (kip) 1,200 800 400 2,400k Story shear (kip) 1,200 2,000 2,400 Roof 3rd Flr 2nd Fir Story overturning moment (kip-ft) 14,400 44.400 80,400
Lecture Five Reinforced Concrete Example_2: A cantilever beam as shown below has a rectangular cross section of b=200mm, d=390mm, span=2.4m with 3 bars of 22mm diameter, carries a uniform dead load including it s own weight of 12 kN/m and L.L of 10.5 kN/m. Check the adequacy of the section, using f of 28 MPa and fy of 280 MPa 70 Wd+ WL 390 Sol: 2.4 m 200
Subject RCD 1 Consider a single 4.0-meter span length concrete slab to be supported by both sides with the RC beam in simply supported system. This slab is used for the shopping gallery (Aeon Jusco). The details of the concrete slab as per the following below : • Exposure= Moderate • Steel Strength = 500 Mpa - Concrete Cylinder Strength, fck = 25 Mpa - Concrete cover = 25 mm - Imposed Load, Qk = 4.0 kpa • M&E and finishes, Gk = 3.5 kpa (finishes) • Concrete density - 25 kN/m' By assuming the slab width is 1.0 meter, please design the above concrete slab by following orders: 1. Determine the slab thickness 2. Design the main rebar for maximum sagging moment with the sketch of the rebars detailing. 3. Please perform the deflection checking, shear checking and crack width checking.
Design the slab of the plan shown below. The dead load is due to self- weight plus weight. of: ▪ Tiles 3 cm ▪ mortar 2 cm sand 7 cm plaster 2 cm ▪ partition 2kN/m² Live load -2.5 kN/m² fe=25 MPa and fy = 420 MPa. 10.00 m 0.30 m -4.80 m- +0.30 m -3.30 m +0.30 m
Determine the dead weight of the reinforced concrete T-beam bridge interior beam using Figure 26 and the bridge data given: Span length Minimum yield strength of steel 0.03 ksf , Barrier (curbs and parapets) load = o.505 klf 50 ft, Beam spacing= 10 ft, Concrete strength = 4.5 ksi, 60 ksi, Future wearing surface load= 1 ft 9 in 1 ft 9 in 120 in Roadway 44 ft 6 in Curb and parapet 4, = 9 in 2 ft 8 in 4@6,5" 35 4 ft 12 # 11 bars LA, = 18.75 in) 10 ft 10 ft 10 ft S= 10 ft 4 ft 24 ft 24 ft b, 18 Figure 26 Bridge cross section for H.W4