The slender bar OA has a mass of G kg, is released from rest in the vertical position and compresses the spring of stiffness k = F kN/m as the horizontal position is passed. Determine the proper setting of the spring, by specifying the distance h, which will result in the bar having an angular velocity o = (H/2) rad/s as it crosses the horizontal position. What is the effect of x on the dynamics of the problem? GFH are the last three digits of your student number replacing any 0 with 10. For example, if your student number is 400027580 then G = 5, F = 8, H = 10, etc. A 600 mm x = 400 mm

The slender bar OA has a mass of G kg, is released from rest in the vertical position and compresses the spring of stiffness k = F kN/m as the horizontal position is passed. Determine the proper setting of the spring, by specifying the distance h, which will result in the bar having an angular velocity o = (H/2) rad/s as it crosses the horizontal position. What is the effect of x on the dynamics of the problem? GFH are the last three digits of your student number replacing any 0 with 10. For example, if your student number is 400027580 then G = 5, F = 8, H = 10, etc. A 600 mm x = 400 mm

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The 10-kg uniform slender rod is suspended at rest when the force of F = 150 N is applied to its end. Determine the angular velocity of the rod when it has rotated 180° clockwise from the position shown. The force is always perpendicular to the rod.
The spool has a mass of 20 kg and a radius of gyration of kO = 160 mm If the 15-kg block A is released from rest, determine the velocity of the block when it descends 850 mm .
The wheel has a mass of 100 kg and a radius of gyration of kO = 0.2 m. A motor supplies a torque M = (40u + 900) N #m, where u is in radians, about the drive shaft at O. Determine the speed of the loading car, which has a mass of 300 kg, after it travels s = 4 m. Initially the car is at rest when s = 0 and u = 0°. Neglect the mass of the attached cable and the mass of the car’s wheels
The vertical bar AB has a mass of 150 kg with center of mass G midway between the ends. The bar is elevated from rest at θ = 0 by means of the parallel links of negligible mass, with a constant couple M = 5 kN∙m applied to the lower link at C. Determine the angular acceleration α of the links as a function of θ and find the force B in the link DB at the instant when θ = 30°.
The spool has a mass of 200 kg and a radius of gyration of kG = 0.2 m. If the coefficients of static and kinetic friction at A are μs = 0.3 and μk = 0.2, respectively, determine the angularacceleration of the spool if P = 400 N.
The slender 9-kg bar AB is horizontal and at rest, and the spring is unstretched. Determine the angular velocity of the bar when it has rotated clockwise 30° after being released. The spring remains vertical during the motion.
In the figure, rod AB has a mass of 10 kg, and must slide within the slots as shown. If the spring is unstretched when θ = 0°, determine the angular velocity of the bar when it reaches that angle after being released from θ = 30°.
If the cord is subjected to a horizontal force of P = 150 N, and gear is supported by a fixed pin at O,determine the angular velocity of the gear and the velocity of the 20-kg gear rack in 4 s, starting from rest. The mass of the gear is 50 kg and it has a radius of gyration of k0 = 125 mm. Assume that the contact surface between the gear rack and the horizontal plane is smooth.
The 12-kg slender rod is pinned to a small roller A that slides freely along the slot. If the rod is released from rest at f) = 0°, determine the angular acceleration of the rod and the acceleration of the roller immediately after the release.
The body and bucket of a skid steer loader has a weight of 2000 lb, and its center of gravity is located at G. Each of the four wheels has a weight of 100 lb and a radius of gyration about its center of gravity of 1ft. If the engine supplies a torque of M = 100 lb ft to each of the rear drive wheels, determine the speed of the loader in t = 10 s starting from rest. The wheels roll without slipping
The 3.8 kg block is descending at a rate of 1.2 m/s when the hydraulic cylinder BC exerts a force F=500 N on the brake arm. Determine the number of radians the wheel will rotate before the system comes to rest. The wheel has a mass of 25 kg and a radius of gyration about its center kO=300 mm. The coefficient of kinetic friction between the brake arm and the wheel is 0.25.
A force of P = 500 N is applied to the 80-kg cart. Determine the reactions at both the wheels at A and both the wheels at B. Also, what is the acceleration of the cart? The mass center of the cart is at G.