The slotted arm revolves in the horizontal plane about the fixed vertical axis through point O. The 2-kg slider C is drawn toward O at the constant rate of 50 mm/s by pulling the cord S. At the instant for which r = 225 mm, the arm has a counterclockwise angular velocity w = 6 rad/s and is slowing down at the rate of 2 rad/s². For this instant, determine the tension T in the cord and the magnitude N of the force exerted on the slider by the sides of the smooth radial slot. Indicate which side, A or B, of the slot contacts the slider. Ans. T= 16.20 N, N = 2.10 N, side B

The slotted arm revolves in the horizontal plane about the fixed vertical axis through point O. The 2-kg slider C is drawn toward O at the constant rate of 50 mm/s by pulling the cord S. At the instant for which r = 225 mm, the arm has a counterclockwise angular velocity w = 6 rad/s and is slowing down at the rate of 2 rad/s². For this instant, determine the tension T in the cord and the magnitude N of the force exerted on the slider by the sides of the smooth radial slot. Indicate which side, A or B, of the slot contacts the slider. Ans. T= 16.20 N, N = 2.10 N, side B

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

8. The motor draws in the cable with an acceleration of 3 m/s2. The beam has a uniform mass of 20 kg/m , and the crate has a mass of 250 kg . Neglect the mass of the motor and pulleys.
a. At the given instant , mention the constraints at C and D, If there are frictionless ball bearings at C and D. b. At the given instant, mention the constraints at C and D, if there are welded joints at C and D. c. At the given instant, for welded joints at C and D, determine the velocity and acceleration of point E in fixed frame.
The spring-mounted 0.89-kg collar A oscillates along the horizontal rod, which is rotating at the constant angular rate θ˙=8.2θ˙=8.2 rad/s. At a certain instant, r is increasing at the rate of 700 mm/s. If the coefficient of kinetic friction between the collar and the rod is 0.63, calculate the friction force F exerted by the rod on the collar at this instant.
In the system that starts to move without speed, the masses of 22.2 kg each reach an angular velocity of 242 rev/min in t second at a radius of R=293 mm with the effect of the 37 N force T. Since the radius of the pulley is r = 63 mm, find t ignoring friction and all masses except the four.
In the arrangement in the figure, the reels 'a 'and 'b' are pulled at VA m/s and VB =12 m/s. since there is no friction between the block and the surfaces; a) find the velocity and acceleration of block c when roller a moves 60mm to the left and roller b moves 90mm to the right b) find the rope force acting on the cable. (a=30°)
A smooth can C, having a mass of 5 kg, is lifted from a feed at A to a ramp at B by a rotating rod. The rod maintains a constant angular velocity of θ˙ = 0.5 rad/s, Neglect the effects of friction in the calculation and the size of the can so that r=(1.2cos⁡θ)m. The ramp from A to B is circular, having a radius of 600 mm. (a) Determine the magnitude of the force which the rod exerts on the can at the instant θθ = 30∘∘. Express your answer to three significant figures and include the appropriate units.
As the hydraulic cylinder rotates around O, the exposed length l of the piston rod is controlledby the action of the oil pressure in the cylinder. If the cylinder rotates at the constant rate ofdθ/dt = 55 deg/s and l is decreasing at the constant rate of 155 mm/s, calculate the magnitudesof the velocity v and acceleration a of end B when l = 125 mm.
The monkeys of Prob. 4/8 are now climbing along the heavy rope wall suspended from the uniform beam. If monkeys A, B, and C have velocities of 5, 3, and 2 ft/sec, and accelerations of 1.5, 0.5, and 2 ft/sec2, respectively, determine the changes in the reactions at D and E caused by the motion and weight of the monkeys. The support at E makes contact with only one side of the beam at a time. Assume for this analysis that the rope wall remains rigid. Weight of Monkey A = 20lb Weight of Monkey B = 25lb Weight of Monkey C = 15lb
The car A has a forward speed of 18 km/h and is accelerating at 2.7 m/s2. Determine the velocity and acceleration of the car relative to observer B, who rides in a nonrotating chair on the Ferris wheel. The angular rate Ω = 2.3 rev/min of the Ferris wheel is constant.
Motor M draws in the cable with an acceleration of 4.0 ft/s², measured relative to the 223-lb mine car. Determine the acceleration of the car in ft/s².0 = 43º, neglect the mass of the pulleys.
The horizontal motion of the plunger and shaft is arrested by the resistance of the attached disk which moves through the oil bath. The velocity of the plunger is v0 = 3.8 m/s in the position A where x = 0 and t = 0, and the deceleration is proportional to v so that a = -kv where k = 0.61 s-1. Find (a) the velocity when t = 5.5 s, (b) the position x when t = 5.5 s, (c) the velocity when x = 3.5 m.
The bucket is hoisted by the rope that wraps around a drum wheel. Ifthe angular displacement of the wheel is θ= (0.5t3 + 15t) rad, where tis in seconds, determine the velocity and acceleration of the bucketwhen t = 3s.