The system in the figure is in equilibrium. A concrete block of mass 164 kg hangs from the end of the uniform strut of mass 63.3 kg. Fo angles p = 36.7° and 0 = 66.5°, find (a) the tension Tin the cable and the (b) horizontal and (c) vertical components of the force on the strut from the hinge. Strut -Hinge (a) Number i Units (b) Number i Units (c) Number i Units

The system in the figure is in equilibrium. A concrete block of mass 164 kg hangs from the end of the uniform strut of mass 63.3 kg. Fo angles p = 36.7° and 0 = 66.5°, find (a) the tension Tin the cable and the (b) horizontal and (c) vertical components of the force on the strut from the hinge. Strut -Hinge (a) Number i Units (b) Number i Units (c) Number i Units

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter14: Static Equilibrium, Elasticity, And Fracture

Section: Chapter Questions

Problem 31PQ: A wooden door 2.1 m high and 0.90 m wide is hung by two hinges 1.8 m apart. The lower hinge is 15 cm...

See similar textbooks

Similar questions

The system is in equilibrium. A concrete block of mass 225 kg hangs from the end of the uniform strut of mass 45.0 kg. A cable runs from the ground, over the top of the strut, and down to the block, holding the block in place. For angles f = 30.0° and u = 45.0°, find (a) the tension T in the cable and the (b) horizontal and (c) vertical components of the force on the strut from the hinge.
a uniform beam with a weight of 60 N and a length of 3.2 m is hinged at its lower end, and a horizontal force of magnitude 50 N acts at its upper end.The beam is held vertical by a cable that makes angle u = 25° with the ground and is attached to the beam at height h = 2.0 m. What are (a) the tension in the cable and (b) the force on the beam from the hinge in unit-vector notation?
A sign is supported by a uniform horizontal boom of length 3.10 m and weight 72.0 N. A cable, inclined at an angle of 16 °with the boom, is attached at a distance of 2.71 m from the hinge at the wall. The weight of the sign is 108.0 N. What is the tension in the cable and what are the horizontal and vertical forces Fx and Fy exerted on the boom by the hinge? Comment on the magnitude of Fy. T= In N Fx= in N Fy= in N The magnitude of Fy is select (small or large) compared to that of Fx and T.
A uniform plank of length 2.00 m and mass 30.0 kg is supported by three ropes, as indicated by the blue vectors. Find the tension in each rope when a 700 N person is d = 0.500 m from the left end
The system in the figure is in equilibrium. A concrete block of mass 209 kg hangs from the end of the uniform strut of mass 44.5 kg. For angles φ = 28.1° and θ = 48.2°, find (a) the tension T in the cable and the (b) horizontal and (c) vertical components of the force on the strut from the hinge.
a uniform beam of length 12.0 m is supported by a horizontal cable and a hinge at angle u =50.0°. The tension in the cable is 400 N. In unit-vector notation, what are (a) the gravitational force on the beam and (b) the force on the beam from the hinge?
The system in the Figure is in equilibrium. A mass M1 = 203.0 kg hangs from the end of a uniform strut which is held at an angle theta = 47.0o with respect to the horizontal. The cable supporting the strut is at angle alpha = 30.0o with respect to the horizontal. The strut has a mass of 59.4 kg. Find the magnitude of the tension T in the cable. Find the magnitude of the horizontal component of the force exerted on the strut by the hinge? Find the magnitude of the vertical component of the force exerted on the strut by the hinge?
A ladder is leaning against a vertical wall, and both ends of the ladder are at the point of slipping. The coefficient of friction between the ladder and the horizontal surface is ?1=0.165 and the coefficient of friction between the ladder and the wall is ?2=0.153 . Determine the maximum angle α with the vertical that the ladder can make without falling on the ground.
A uniform horizontal beam 5.00 m long and weighting 3.03 102 N is attached to a wall by a pin connection that allows the beam to rotate. Its far end is supported by a cable that makes an angle of 53.0° with the horizontal (Figure (a)). If a person weighing 6.05 102 N stands 1.60 m from the wall, find the magnitude of the tension in the cable and the force exerted by the wall on the beam. T = N Rx = N Ry = N Even if we selected some other axis for the torque equation, the solution would be the same. For example, if the axis were to pass through the center of gravity of the beam, the torque equation would involve both T and Ry. Together with Equations (1) and (2), however, the unknowns could still be found—a good exercise. In this example, notice the steps of the Problem-Solving Strategy could be carried out in the explicit recommended order.QUESTION What happens to the tension in the cable if the man in Figure (a) moves farther away from the wall? The tension would…
Two uniform planks, each of mass m = 7.45 kg and length L = 2.51 m, are connected by a hinge at the top and by a chain of negligible mass attached at their centers, as shown in the figure. The assembly will stand upright, in the shape of an A, on a frictionless surface without collapsing. If the chain has the length 0.81 m, find each of the following: a) the absolute value of the tension in the chain, b) the absolute magnitude of the force on the hinge of each p lank
One end of a uniform rod of weight w = 73.5 N and length L = 2.55 m is supported by a cable at an angle of ? = 37.0°above the rod. The other end rests on a small frictionless support and presses into a wall as shown in the figure. Determine the magnitude n of the vertical normal force exerted by the support on the rod and find the magnitude T of the tension in the cable.
A uniform plank of length 5.0 m and weight 225 N rests horizontally on two supports, with 1.1m of the plank hanging over the right support. To what distance x can a person who weighs 377 N walk on the overhanging part of the plank before it just begins to tip?