To cool the lubricating oil, a concentric counter-flow heat exchanger (see Figure Q1) is utilized, with the water flowing via an internal pipe with an internal diameter of 0.02 m and a flow rate of 0.18 kg/s. The intake and output oil temperatures are 95°C and 65°C, respectively, as the oil runs through the outer annulus (0.04 m) at a flow rate of 0.12 kg/s. The water enters the heat exchanger at a temperature of 30°C. Stating all the necessary assumptions, (b) Considering the effect of fouling during operation through time and the heat transfer resistance would be affected, discuss the design and operation considerations to minimize the fouling problem on the opertion of the heat exchanger during design and operation stages. Consider average value of Engine oil property: C-2131 JM/kg°C; µ=0.0325 Ns/m?; K=0.138 W/m°C Consider average value of water properties: Cy-4174 J/kg°C; u=725x 10-6 Ns/m?; K=0.138 W/m°C; Pr=4.85 Annulus Oil Inner tube d, = 40 mm d, = 20 mm Water Oil rieu 01
To cool the lubricating oil, a concentric counter-flow heat exchanger (see Figure Q1) is utilized, with the water flowing via an internal pipe with an internal diameter of 0.02 m and a flow rate of 0.18 kg/s. The intake and output oil temperatures are 95°C and 65°C, respectively, as the oil runs through the outer annulus (0.04 m) at a flow rate of 0.12 kg/s. The water enters the heat exchanger at a temperature of 30°C. Stating all the necessary assumptions, (b) Considering the effect of fouling during operation through time and the heat transfer resistance would be affected, discuss the design and operation considerations to minimize the fouling problem on the opertion of the heat exchanger during design and operation stages. Consider average value of Engine oil property: C-2131 JM/kg°C; µ=0.0325 Ns/m?; K=0.138 W/m°C Consider average value of water properties: Cy-4174 J/kg°C; u=725x 10-6 Ns/m?; K=0.138 W/m°C; Pr=4.85 Annulus Oil Inner tube d, = 40 mm d, = 20 mm Water Oil rieu 01
Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)
8th Edition
ISBN:9781305387102
Author:Kreith, Frank; Manglik, Raj M.
Publisher:Kreith, Frank; Manglik, Raj M.
Chapter10: Heat Exchangers
Section: Chapter Questions
Problem 10.46P
Related questions
Question
Please help me, I want to answer this question without quoting or plagiarism, I hope the solution is to be written in MS Word, not written by hand.
(b)
Expert Solution
This question has been solved!
Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.
Step by step
Solved in 3 steps with 6 images
Knowledge Booster
Learn more about
Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.Recommended textbooks for you
Principles of Heat Transfer (Activate Learning wi…
Mechanical Engineering
ISBN:
9781305387102
Author:
Kreith, Frank; Manglik, Raj M.
Publisher:
Cengage Learning
Principles of Heat Transfer (Activate Learning wi…
Mechanical Engineering
ISBN:
9781305387102
Author:
Kreith, Frank; Manglik, Raj M.
Publisher:
Cengage Learning