Two dc shunt generators are operating in parallel supplying a total load of 25 kW. The induced emfs of the generators are 120 V and 115 V, the armature resistances are 0.05 Ω and 0.04 Ω, and the shunt field resistances are 20 Ω and 25 Ω. Find the common operating voltage.

Two dc shunt generators are operating in parallel supplying a total load of 25 kW. The induced emfs of the generators are 120 V and 115 V, the armature resistances are 0.05 Ω and 0.04 Ω, and the shunt field resistances are 20 Ω and 25 Ω. Find the common operating voltage.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.21P: An industrial plant consisting primarily of induction motor loads absorbs 500 kW at 0.6 power factor...

See similar textbooks

Related questions

Q: A short-shunt compound generator delivers a load current of 30 A at 220 V, and has armature,…

Q: A- A d.c. series motor draws 22 A from a 240 V line while running at 840 rpm. It has an armature…

Q: A two-pole Y-connected synchronous generator has a voltage level of 2300 V, a capacity of 1000 kVA,…

A: Given P=2 V=2300 V S=1000 kVA pf=0.8 lagging Ra=0.15 Ω Xa=1.1 Ω f=50 Hz PFW=24 kW Pcore=18 kW

Q: shunt generator with a capacity of

Q: Q2. The O.C.C for a shunt generator at (1000 r.p.m) given by:lf(A) 0.2 0.5 1.0 1.5 2.12.4 3 4.2…

A: Given: The O.C.C for a shunt generator at (1000 r.p.m) given by: lf (A) 0.2 0.5 1.0 1.5…

Q: A 50 Hz, 400 V, 4 pole wound rotor Induction Motor has star connected stator and delta connected…

A: Given data: ZR=0.1+j0.5 Ωn1=650 rpmf=50 HzP=4 Note: As per our policy, I have attempted the first…

Q: A shunt generator supplies a current of 1.2 ohm at 240 V to a load. Find the emf generated it the…

Q: A shunt generator supplies 16A at a Terminal votage of 200 vots. The armature nd shunt field…

A: Given that Vt=200VIL=96Ara=0.5 ohmRsh=50 ohmPi+Pf=2500W (a)…

Q: A 600V supply is coupled to a three-phase induction motor with a nominal rating of 100 horsepower…

A: Given, Prated = 100 HP =74600 WattNs = 1800 rpmV = 600VPt = 70KWN =…

Q: series turns per pole are needed on a 500-kW compound generator required to give 450 V on no-load…

A: 500 kw compound generator No load [ig =450 v, Amphere burns =9000/pole Full load -> eg =500 v…

Q: A 1500rpm DC shunt generator is supplying 100 lamps of 60W at 230V, the armature and field…

A: Simple problem on machines. Look below for solution:-

Q: 0. A short shunt compound dc generator supplies 7.5 kW at 230 V. the shunt field, series field and…

A: A DC machine is classified into two types. DC motors DC generators The above question is based on…

Q: Q1: The following test results are obtained on a 7,500-line V alternator: O.C.V.: 3,100 4,900 6,600…

Q: The 50kW, 500V short compound DC generator has an armature resistance of 0.06 Ohms, a series field…

Q: Two skunt generators with an armature resistance of 0.01 ohm & 0.02 ohm and field resistance of 10…

A: In this question we need to find a bus bar voltage of the given two parallel operating shunt…

Q: A 10 KW full load output power of shunt generator having an armature circuit resistance of 0.75 Q…

A: given shunt generator

Q: Terminal voltage of shunt G1 generator in idle operation is 500 V. G1. If the terminal voltage of…

A: GivenTwo generators G1 and G2Load for parallel operation =400 kW

Q: Q6) select the right choice for the following sentences: 1. The critical resistance of the d.c.…

Q: An industrial site (3-phase 415V) has the following loads: (i) Lightings of 150kW in total (ii) Two…

Q: 8- In a Hopkinson test on two 440V, 200kW generators, the the full-load current, and in addition,…

A: Given data, Terminal voltage of generator V = 440 V. Output power P = 200 KW. Current supplied is 90…

Q: 400 KVA, 400 V three-phase star connected 2p3D2 pole round rotor synchronous the leakage reactance…

Q: Two shunt generators running in parallel share a load of 100 kW equally at a terminal voltage of 230…

A: According to question given two shunt generator sharing a load 100 kW equally at terminal voltage.…

Q: Soru : By drawing the Symmetrical 3-phase 2-pole permanont SORU madel and equivalnt circuit of a…

A: Given machine 3 phase 2 pole permanent magnet synchronous machine

Q: Q2- a) A 220-V compound generator is supplying a load of 100 A at 220 V. The resistances of its…

Q: 1. The following data relate to a 6,600-V, 10,000-kVA, 50-Hz, 3-0, turbo- alternator: O.C. kilovolt…

A: Explanation: Given that the power factor = cos ϕ = 0.8 Therefore, tan ϕ = tan (cos-10.8) = 0.75 Sin…

Q: 12.31 An eight-pole, three-phase PMSM has a torque constant K of 2 V s. When the load torque is 20…

Q: A shunt generator delivers 350A at 230 V and the resistance of the shunt field and armature are 50 Q…

Q: A 5hp 200V 3-phas, 4-pole Induction motor parameters are as follows Rs=0.277 Ohm Rr=0.183 Ohm…

A: A 5hp 200V 3-phas, 4-pole Induction motor parameters are as followsRs=0.277 OhmRr=0.183 OhmLm=0.0538…

Q: a four pole dc generator has an armature winding containing a total of 648 conductors connected in 3…

A: Concept: 1 maxwell= 10-8 weber Eg=P∅NZ60A V P: number of polesN: speed in rpm∅: flux per pole in…

Q: A given shunt generator delivers 430 A at 240 V and the resistance of the shunt field and armature…

A: Given a shunt generator delivers, Load current, IL=430 A Supply voltage, Vs=240 V Shunt field…

Q: 400 KVA, 400 V three-phase star connected 2p = 2 pole round rotor synchronous The leakage reactance…

Q: The open-circuit characteristic of a DC generator is also called as characteristics. O internal O…

A: The open characteristic equation of a dc generator is between no load emf and field current is…

Q: 5. A three-phase, Y-connected load takes 50 A current at 0.707 lagging power factor at 220 V between…

Q: 6. Two shunt generators running in parallel share a load of 100 kW equally at a terminal voltage of…

A: Given data, V1=230 VV2=230 VVNL1=240 VVNL2=245 V

Q: A short, combined DC generator rotating at 1000 rpm, feeding a 45 kW load at 240 V supplies a…

A: Back EMF= Terminal voltage + voltage drop in series and armature resistance. power developed=Back…

Q: A 15-kV 35-KVA 0.76-PF-lagging 50-Hz four-pole Y-connected steam-turbine generator has a synchronous…

A: Solution- Given data, VL = 15V S = 35 V P.F. =0.76 lag f = 50 Hz P = 4 Xs = 3.50 ohm Ra = 0.75 ohm

Q: Moving to another question will save this response. Question 5 A shunt generator delivers 350A at…

A: In this question, choose the correct option What is induced emf of the DC generator

Q: A shunt generator has an external characteristic whose terminal voltage is given by the equation VT=…

A: Given , external characteristics of generator Vt = 240 -0.5 IL . Given load resistance RL = 12 ohms…

Q: A single-phase synchronous motor having a synchronous reactance of 5 ohms and negligible resistance…

Q: A d.c. A shunt generator delivers a load current of 80 A at 400 V. Its armature and field…

A: Solution: Given data: shunt generator: V=400 V, load current IL=80 A, armature resistance Ra=0.2Ω,…

Q: A 600V supply is coupled to a three- phase induction motor with a nominal rating of 100 horsepower…

Q: A d.c. series motor draws 25 A from a 260 V line while running at 900 rpm. It has an armature…

A: In this question we need to find a value of the diverter resistance Rd .

Q: a. The per phase equivalent circuit of a 460 VL, 8-pole, and 60-Hz, Y-connected induction motor…

A: In this question, find the synchronous speed Ns = 120f/P Motor speed N= (1-slip)Ns Stator current…

Q: Q2) Three shunt generators operate in parallel and supply a load current of 12000 A, connected…

A: We will apply KCL at node to find terminal voltage. Armature current=generated voltage- terminal…

Q: A three-phase induction motor with squirrel cage: 50HP,480−V,60−Hz,4 poles and connected in Y. The…

Q: A dc short-shunt compound generator delivers 20 kW to a load at 500 V. The armature, series field…

Q: Find how many series turns per pole are needed on a 500-KW compound generator required to give 450 V…

A: 500 kw compound generator No load [ig =450 v, Amphere burns =9000/pole Full load -> eg =500 v…

Q: : A short-shunt d.c. compound generator supplies 200 A at 100 V. The resistance of armature, series…

Q: Q4/ (a) A d.c. shunt generator has shunt field winding resistance of 100 . It is supplying a load of…

Q: 3) A 450 V, 50 HZ, Y-connected, six-pole synchronous generator is rated at 50 KVA at 0.8 lagging pf.…

A: “Since you have posted a question with multiple sub-parts, we will solve first three sub-parts for…

Question

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Similar questions

An industrial plant consisting primarily of induction motor loads absorbs 500 kW at 0.6 power factor lagging. (a) Compute the required kVA rating of a shunt capacitor to improve the power factor to 0.9 lagging. (b) Calculate the resulting power factor if a synchronous motor rated at 500 hp with 90 efficiency operating at rated load and at unity power factor is added to the plant instead of the capacitor. Assume constant voltage (1hp=0.746kW).
Two dc shunt generators, each with armature resistance of 0.02 ohm and field resistance of 50 ohms run in parallel and supply a total current of 1000 A to the load circuit. If their emf's are 270 V and 265 V, solve the bus bar voltage. Subject:Electrical Machine 1
Determine the voltage regulation of a 2,000-V, 1-phase alternator giving a current of 100 A at 0.8 p.f. leading from the test results. Full-load current of 100 A is produced on short-circuit by a field excitation of 2.5 A. An e.m.f. of 500 V is produced on open-circuit by the same excitation. The armature resistance is 0.8 Ω . Draw the vector diagram
A long shunt generator delivers 25kW at 220V. The shunt, seriesand armature resistances are 50Ω, 0.02Ω, and 0.05Ω respectively,calculate the generated emf
Two DC generators, each with armature resistance of 0.02 ohm and fieldresistance of 50 ohms run in parallel and supply a total current of 1000 amperesto the load circuit. If their emfs are 270 V and 265 V, their bus bar voltagewill be. [Ans. 267.5 V]
A 15-kV 35-KVA 0.76-PF-lagging 50-Hz four-pole Y-connected steam-turbine generator has a synchronous reactance of 3.50 Ω per phase and an armature resistance of 0.75 Ω per phase. This generator is operating in parallel with a large power system (infinite bus). d) Sketch the corresponding phasor diagram and calculate for the armature current (assume the field current is still unchanged) e) At the absolute power possible, how much reactive power will this generator be supplying or consuming?
A 5hp 200V 3-phas, 4-pole Induction motor parameters are as followsRs=0.277 OhmRr=0.183 OhmLm=0.0538 HLs= 0.0553HLr=0.56 HStator to rotor turns ratio is 3. Find the q-d axis steady state voltages and currents and phase currents (abc) using stator frame of reference.
4. Two shunt generators operating in parallel have each an armature resistance of 0.02 . The combined external load current is 2500 A. If the generated e.m.fs. of the machines are 560 V and 550 V respectively, calculate the bus-bar voltage and output in kW of each machine. Subject: Electrical Machine 1
The 50kW, 500V short compound DC generator has an armature resistance of 0.06 Ohms, a series field resistance of 0.04 Ohms and a shunt field resistance of 125 Ohms. The voltage loss on the brush is 2 V. Calculate the armature induced voltage at the load of the twig
Q19) A 1000rpm DC shunt generator is supplying 100 lamps of 60W at 230V, the armature and field resistance are respectively 0.1Ω and 115Ω.Calculate the Load current. a. 16.09 A b. 36.09 A c. 26.09 A d. 46.09 A
Two shunt generators rated at 200 kW and 400 V have full load regulation of6% and 4% respectively. (a) How will they share 800 A while operating inparallel? (b) If the machines are supplying a load whose resistance is 0.4ohm find the supplied currents. Please Answer correctly Need answer now
A compound dc generator is supplying a load of 120A and 120V. The shunt field,series field and armature resistances are 32 ohms 0.07 ohms and 0.1 ohms respectively. Find the generated voltage in LONG SHUNT CONNECTION and SHORT SHUNT Connection NOTE: DRAW THE EQUIVALENT CIRCUIT DIAGRAM