Two parallel shafts whose centers are 10 meters apart are connected by an open belt drive with a V-belt with a groove angle of 30°. The diameter of the larger pulley is 1000 mm and that of the smaller pulley is 400 mm. The smaller pulley is running at 1000 rpm to deliver 10 kW of power. The mass of the belt is 1 kg/m. Taking centrifugal tension into account, determine the minimal cross-sectional area if the allowable tensile stress of the belt is 5 MPa. The coefficient of friction between the belt and the pulleys is 0.25.

Two parallel shafts whose centers are 10 meters apart are connected by an open belt drive with a V-belt with a groove angle of 30°. The diameter of the larger pulley is 1000 mm and that of the smaller pulley is 400 mm. The smaller pulley is running at 1000 rpm to deliver 10 kW of power. The mass of the belt is 1 kg/m. Taking centrifugal tension into account, determine the minimal cross-sectional area if the allowable tensile stress of the belt is 5 MPa. The coefficient of friction between the belt and the pulleys is 0.25.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

An oil-transfer pump uses 1 kW of power in transferring 5 kg/s of oil through a 3-cm-diameter pipe. The changes in kinetic and potential energies are essentially zero, and the process is adiabatic. Additionally, there is no appreciable temperature change in the oil, which has a density of 1500 kg/m³. Determine the change in pressure from inlet to exit.
A 30-kW motor drives a fan and delivers air through a duct 1.0 m x 1.0 m at 11.684 cm WG static pressure and 2.159 cm WG velocity pressure. The density of air is 1.20 kg/m³ and the density of water is 1000 kg/m³. Determine: 2. The capacity of fan, m3/s 3. Fan efficiency, %
Problem 8The demand for electric power is usually much higher during the day than it is at night, andutility companies often sell power at night at much lower prices to encourage consumers to usethe available power generation capacity and to avoid building new expensive power plants thatwill be used only a short time during peak periods. Utilities are also willing to purchase powerproduced during the day from private parties at a high price. Suppose a utility company is selling electric power for $0.07/kWh at night and is willing to pay $0.15/kWh for power produced during the day. To take advantage of this opportunity, an entrepreneur is considering building a large reservoir 100 m above the lake level, pumping water from the lake to the reservoir at night using cheap power, and letting the water flow from the reservoir back to the lake during the day, producing power as the pump–motor operates as a turbine–generator during reverse flow. Preliminary analysis shows that a water flow…
Large wind turbines with blade span diameters of over 100 m are available for electric powergeneration. Consider a wind turbine with a blade span diameter of 110 m installed at a sitesubjected to steady winds at 9 m/s. Taking the overall efficiency of the wind turbine to be 40percent and the air density to be 1.25 kg/m3, determine the electric power generated by thiswind turbine. Also, assuming steady winds of 9 m/s during a 24-hour period, determine theamount of electric energy and the revenue generated per day for a unit price of RM0.40 /kWh for electricity.
Determine the power required for an 1150-kg car to climb a 100-m-long uphill road with a slopeof 35° (from horizontal) in 10 s (a) at a constant velocity, (b) from rest to a final velocity of 30m/s, and (c) from 35 m/s to a final velocity of 5 m/s. Disregard friction, air drag, and rollingresistance. ( I was looking on a chegg video and was wondering: "does PE + KE= Work?" I thought it was just (the change in KE= Work) threw me off hard. I only need problem (b.) and if you choose to answer only of the these two questions may you please answer this one?
thermodynamics: A Centrifugal pump operating under steady flow conditions delivers 2000 kg/min of water from an initial pressure of 10 psi to a final pressure of 280 KPa. The diameter of the inlet pipe is 20 cm and the diameter of the discharge pipe is 3 in. What is the work?
How much work is done on helicopter by gravity? How much work is done on it by the upward thrust force? What is the magnitude of the upward thrust force (assumed constant)?
A mini hydro power station takes in 3 cubic meters per second of water from a wide open reservoir through its turbine from an elevation of 15 meters and discharges to its surroundings at 0.50 m/s. During data gathering, the rotational force of the turbine shaft is measured 250 N for a distance of 2 m from its center axis at 2,850 rpm. If the electrical generator is 88% efficient, determine the turbine efficiency and the electrieity output of this station. Show the energy or schematie diagram and label it accordingly.
Power is transmitted between two shafts by a V-belt whose mass is 0.9 kg/m length. The maximum permissible tension in the belt is limited to 2.2 kN. The angle of lap is 170° and the groove angle 45°. If the coefficient of friction between the belt and pulleys is 0.17, find : 1. velocity of the belt for maximum power ; and 2. power transmitted at this velocity. [Ans. 28.54 m/s ; 30.7 kW]
In rural housing the water source is obtained through groundwater pumped upwards. Suppose the groundwater source has a depth of 60 m from the surface. The water will be lifted as far as 5 m above ground level with a pump. The diameter of the pipe inlet is 10 cm and the outlet is 15 cm.By ignoring the interaction of heat with the environment and heat due to friction, determine the input work (Watt) required by the pump for the water to flow stable at a rate of 15 liters / s. (Water type mass 1000 kg / m ^ 3). (Application of the 1st Law of Thermodynamics to open systems)
Show that the power produced by a wind turbine is proportional to the cube of the wind velocity and to the square of the blade span diameter.
a)When is work said to be done by a system? b) Why work is considered path function while pressure is considered a point function?