Two shafts are being connected by a coupling which is held together by four 3/4-in diameter bolts. Find the torque than can be safely transmitted by the coupling if the working shear stress is 15 ksi in the bolts and bearing stress is 18 ksi in the coupling. Assume that the forces in the bolts have equal magnitudes. 1 in 4.2 in
Q: A solid and a hollow shaft, connected by a coupling, transmit power. The outside diameters of the…
A:
Q: A hollow aluminum propeller shaft, 30 ft. Ilong with 15 in. outer diameter and an inner diameter…
A: (a) The maximum shear stress, τmax = 3.8 ksi. (b) The angle of twist of the shaft, θmax = 0.052…
Q: A hollow bronze shaft (G=5000ksi) has an outer diameter of 3in and a wall thickness of 0.25in. The…
A: Given data: Converting all data into SI units. Modulus of rigidity G=5000 ksi=34473.8 Mpa Outer…
Q: A flanged bolt coupling consist of 9 steel bolts evenly spaced around a bolt circle 300 mm. in…
A: Coupling : It is a mechanical element which connect the shaft from another also it is used to…
Q: 3.13 The torques T and 2T are carried by a shaft consisting of steel and aluminum segments. If the…
A: Given:ζs=14,000 psiζa=7,500 psiθmax=8Gs=12*106 psiGa=4*106 psi
Q: A shaft is to be fitted with a flanged coupling having 8 bolts on a circle of diameter 150 mm. The…
A:
Q: 2- Compare the weight of equal lengths of hollow and solid shafts to transmit a torque T for the…
A:
Q: 3.13 The shaft consisting of steel and aluminum segments carries the torques T and 27. Find the…
A:
Q: The figure shows an inboard engine, 8-ft long steel drive shaft, and propeller for a motor boat. The…
A: Given data: P=200 hpN=3500 rpmG=12×106 psiτ=12000 psi Need to determine the diameter of the smallest…
Q: A solid shaft in a rolling mill transmits 30kW at 100 rpm. Find the diameter in mm of the shaft so…
A:
Q: composite shaft is made by slipping a bronze tube of 3-in. outer diameter an -in. inner diameter…
A:
Q: Q2. A flange coupling joining two sections of shaft is required to transmit 250 kW at 1800 rpm. If 6…
A: To find: The diameter of the bolt. Given: The power transmitted by the shaft is P=250 kW. The speed…
Q: A solid shaft in a rolling mill transmits 20 kW at 2 revolutions per second. The length of the shaft…
A:
Q: A makeshift compact torsional spring is made of steel (Gst = 11,000,000 psi) and is composed of a…
A:
Q: B) A wind turbine with an electrical generator rated at 200 k W output. The low speed shaft rotates…
A:
Q: 6. A propeller shaft in a ship is 350 mm in diameter. The allowable working stress in shear is 50…
A:
Q: In an industrial machine, two shafts have to be connected by using a muff coupling. The shaft…
A: Given,
Q: The constant wall thickness of a tube with the elliptical cross section shown is 0.12 in. what…
A: As per given Question Wall thickness =0.12in Shear force =6000 psi We have to determine the torque
Q: A motor is driving a solid circular steel shaft transmits 40kW of power at 500 rpm. If the diameter…
A:
Q: Problem 4 A 200-mm-diameter pulley is prevented from rotating relative to 60-mm-diameter shaft by a…
A:
Q: In an industrial machine, two shafts have to be connected by using a muff coupling. The shaft…
A:
Q: aft with a hollow cross section is subjected to torque of magnitude T = 5.5 kN-m. If the outer…
A: Given:T=5.5 kN.mdo=0.1 mt=10 mm
Q: A mild steel shaft of 50 mm diameter is subjected to a bending moment of 2000 N-m and a torque T. If…
A:
Q: 1. The rotating solid steel shaft is simply supported by bearings at points B and C and is driven by…
A: given data D=150mmSy=420Mpaθ=20°SUT=560MpaTA=340NmFOS=2.5(A) Consider the equation of torque acting…
Q: A solid shaft 125 mm in diameter transmits 120 KW at 160 rpm. Taking C = 8 x 10 N/mm² and length of…
A: Given data as per question shaft dimeter =125 mmPower transmitted =120 kwSpeed=160 rpmC = 8×10…
Q: Q- A solid 75-mm-diameter Aluminum [E = 80 GPa and 0.3 Poisson ratio] shaft that is 1.25-m long…
A: DAl=Diameter of Solid Aluminum=75 mmLAl=length of Aluminum shaft=1.25 m DB1=Outside Diameter of…
Q: A Compound Steel (G=80GPA) Shaft consists of a solid 90mm diameter (segment1) and a solid 70mm…
A:
Q: 2 A hollow simple supported shaft 3m made of steel with di/do of 0.6. e shaft is subjected to a…
A:
Q: 2- Compare the weight of equal lengths of hollow and solid shafts to transmit a torque T for the…
A:
Q: Q4-A circular shaft consists of steel and aluminum segments is subjected to the torques shown in…
A:
Q: A shaft with splines of a diameter of 50 mm, as shown in the figure below, transmits a torque of…
A: Spline shafts are commonly employed in autos, aeroplanes, and earthmoving gear because they can…
Q: A shaft of 30 kW 710 r.p.m motor is 40 mm in diameter and is supported in bearings 500 mm apart.…
A: Given: The power of shaft is P=30 kW The revolution of shaft per minute is N=710 rpm The diameter…
Q: Two solid shafts, 50 mm in diameter, are connected by a flange coupling with six bolts and a pitch…
A:
Q: A keyed gears delivers a torque of 912.4 N-m thru its shaft of 63.5 mm outside diameter. If the key…
A: GivenT=912.4Nmd=63.5mmt=15.875mmw=11.1125mmτ=61.2MPaσ=98.8MPa
Q: Find the proper spacing for 8-mm diameter steel rod for a 1.80-m diameter wood stave pipe if the…
A:
Q: Maximum shear stress developed on the surface of a solid circular shaft under pure torsion is 235…
A:
Q: Find factor of safety if the Ultimate Stress of a ductile material is 250.94 MPa. If the material is…
A:
Q: A motor driving a solid circular steel shaft transmits 40kW of power at 500 rpm. If the diameter of…
A: Given, Power = P = 40 kW = 40,000 W RPM = N = 500 rpm Diameter of shaft = d = 40 mm = 0.04 m
Q: A flanged bolt coupling consists of six 2-in. steel bolts evenly spaced around a bolt circle 12 in.…
A: To find : Find the torque that can be applied. Given : Diameter of steel bolts ds= 1/2 in Diameter…
Q: A flange-and-bolt coupling between two shafts carries 12 bolts at a pitch diameter of 18 in. The…
A: Given data: In a Flange and Bolt coupling between two shafts: Number of bolts, n=12. Pitch circle…
Q: according to Maximum Shear strain energy theory ,Calculate the factor of safety of the shaft When it…
A:
Q: PROBLEM 3 Two shafts are being connected by a coupling which is held together by four 3/4-in…
A:
Q: A flanged bolt coupling consist of 9 steel bolts evenly spaced around a bolt circle 300 mm. in…
A:
Q: 1000mm Input shaft A 100mm Bearing support 200mm 450mm pulley pulley 200mm 150mm 450mm pulley…
A: NOTE:- As per our company guidelines we are supposed to answer only first 3 sub-parts. Kindly repost…
Q: Compute for the induced compressive stress in kPa, of a steel shafting of 59 mm diameter and 954 m…
A:
Q: Q-A solid 75-mm-diameter Aluminum [E 80 GPa and 0.3 Poisson ratio] shaft that is 1.25-m long extends…
A:
Q: A makeshift compact torsional spring is made of steel (Gst = 11,000,000 psi) and is composed of a…
A: G=11000,000 psiLAC=12 inLAB= 12 inT=2 kip-ina Maximum shear stress in solid shaftdsolid=.6 in…
Step by step
Solved in 2 steps with 2 images