volume 0.56 kg of water in a piston cylinder device as shown initially the water is at T, = 120 °C with V₁ = 36 L (State 1). Heat is then added such that all the water in the cylinder is saturated vapor and the piston just touched the spring without exerted any force on the spring (State 2). Then additional heat is added to the system such that the temperature is T₂ = 600 °C and the pressure is P3 = 400 kPa (State 3). Po 3 1) Find the total work (from state 1 to state 3, in kW). O 147.73 Qin O 111.16 H₂O O133.48 107.23 156.11 O125.24 2) Find the total heat transfer for the process (from state 1 to state 3, in kW). 1424.6 O Not listed 1486.0 1585.4 Not listed 2

volume 0.56 kg of water in a piston cylinder device as shown initially the water is at T, = 120 °C with V₁ = 36 L (State 1). Heat is then added such that all the water in the cylinder is saturated vapor and the piston just touched the spring without exerted any force on the spring (State 2). Then additional heat is added to the system such that the temperature is T₂ = 600 °C and the pressure is P3 = 400 kPa (State 3). Po 3 1) Find the total work (from state 1 to state 3, in kW). O 147.73 Qin O 111.16 H₂O O133.48 107.23 156.11 O125.24 2) Find the total heat transfer for the process (from state 1 to state 3, in kW). 1424.6 O Not listed 1486.0 1585.4 Not listed 2

Name: 0.56 kg of water in a piston cylinder device as shown initially the w
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: 0.56 kg of water in a piston cylinder device as shown initially the water is at T, = 120 °C withvolume V, = 36 L (State 1). Heat is then added such that all the water in the cylinder issaturated vapor and the piston just touched the spring without e

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Two vessels A and B of different sizes are connected by a pipe with a valve. Vessel A contains 142 L of air at 2,767.92 kPa, 93.330C. Vessel B, of unknown volume, contains air at 68.95 kPa, 4.440C. The valve is opened and, when the properties have been determined, it is found that pm = 1378.96 kPa, tm = 43.330C. What is the volume of vessel B?
Air is compressed into a 90 ft3 rigid tank until the pressure is 30.5 psia and the temperature becomes 580 0R. What is the mass of the air in lbm and the change in pressure when the temperature decreases to 300 0R Rair = 53.342 ft-lbf/ lbm-0R (c) What is the final pressure of the gas? (The value of gas constant, R = 0.4615 kJ/kg-K, Cp = 1.8723 kJ/kg-K, Cv = 1.4108 kJ/kg-K)
While the pressure remains constant at 700 kPa the volume of the system of hydrogen changes from 0.6 m3 to 0.2 m3. What are a) the change of internal energy, b) the change enthalpy, c) the change of entropy, d) heat and e) work for nonflow?
The system given in the figure is compressed in accordance with the P=sb process under mass m (300 kg). At the beginning of compression, the pressure of carbon dioxide is 200 kPa and its temperature is 100 °C. Since the atmospheric pressure is 100kPa and the gravitational acceleration is 9.806 m/s2;a. First and last volumes?b. F1 force?c. The amount of substance in the cylinder?D. Final pressure, temperature ?
Consider a container with two chambers connected by a valve. The first chamber has volume, V1, is held at a constant temperature, T, and is filled with an ideal gas. The second chamber has volume, V2, is held at the same temperature, T, and is under vacuum. a) Sketch a picture of this container and its contents. b) Mathematically, how does entropy change as the valve is opened? c) When is the change in entropy maximized during this process?
Saturated steam vapor at 250°C moves along its isotherm until the pressure becomes 1MPa. Locate the end state points on the Mollier chart and for each kilogram of steam processed determine (a) the initial pressure, (b) the change of enthalpy, (c) the change of entropy.
A close pressurized vessel having a volume of 342ft3 contains air at 214psig and 85 ̊F.Assuming that the temperature in the tank remains constant, how many 1.75ft3 evacuated drumscan be filled to 50 psig and 80 ̊ F?a. 490tanks b. 577tanks c. 715tanks d. 572tanks
The closed boiler of volume 0.5m3 contains water-vapor mixture with a quality of 0.75 at the initial pressure of p1=1.1bar. After heating, the pressure increases to 2.0 bar. a.Draw the T-v diagram showing all states. Show by arrow the process. b.Calculate the mass in kg of the total mixture and the mass of the liquid that was presented initially inside the container. c.What are initial and final temperatures of the mixture in C? d.What change in internal energy water-vapor mixture undergoes from stage 1 to stage 2? e.Using the energy balance equation answer how much heat was added to the container.
A pipe with a valve connects two vessels A and B of different sizes. Vessel A contains 142 L of air at 2767.92 kPa, 93 0 C. Vessel B of unknown volume, contains air at 68.95 kPa, 4 0 C. The valve is opened and when the properties of the mixed gas has been determined, it is found that p m = 1378.96 kPa and t m = 43 0 C. What is the volume of vessel B? include the diagram
An oxygen gas R = 0.2598 KJ/kg°k and k = 1.395. If 4 kg of oxygen undergo a reversible non flow constant pressure process from initial volume =1.2 cubic meter and initial pressure = 690 kPa to a state where final temperature = 600°C. What is the initial temperature ? Determine the constant volume specific heat. need a complete solution, symbol, and cancellation:)
A fixed volume and sealed container contains 2.2 m3 of saturated liquid and saturated vapor mixture R-134a refrigerant at 12 °C. Heat is given to the container and when the temperature of the container reaches 52 ° C , it is observed that the saturated liquid disappears completely and the refrigerant becomes saturated vapor. a)Find the pressure, specific volume and mass of the saturated steam in the last case. b)Find the mass of the saturated liquid in the first case. c)Draw the T-v diagram of the process. d)Draw the P-v diagram of the process.
A piston/cylinder setup contains 1 kg of air at 20°C with an initial volume of V1=0.1 m3. Initially, the piston rests on some stops, but it is possible for it to move within the cylinder without friction. To lift the piston and start such motion, an air pressure of 1400 kPa is required. Now, heat is transferred to the system so that the temperature of the air reaches to a final value of 300°C. A. Which statement is true? The air can lift the piston before the temperature reaches to 300°C The air cannot lift the piston before the temperature reaches to 300°C. B. What is the final volume of the air in part A? C. What is the absolute value of the total work done by air on the piston?