Water flows through a Venturi meter, as shown in the figure. The pressures of the water at locations a and b in the pipe support columnsof water that differ in height by L = 10 in. The atmospheric pressure is 14.7 lbf/in², the specific volume of water is 0.01604 ft3/lb, andthe acceleration of gravity is g = 32.0 ft/s².Step 1Patm = 14.7 lbf/in.²g= 32.0 ft/s²Determine the difference in pressure between points a and b, in lbf/in².Does the pressure increase or decrease from point a to point b?Waterv = 0.01604 ft³/lbSave for LaterDetermine the difference in pressure between points a and b, in lbf/in².Pb-Pa = ilbf/in²4Attempts: 0 of 4 usedSubmit Answer

Answered: Image /qna-images/answer/9c5a63ef-19f0-45e1-82bc-7e54fa747bdc.jpg

Water flows through a Venturi meter, as shown in the figure. The pressures of the water at locations a and b in the pipe support columns of water that differ in height by L = 10 in. The atmospheric pressure is 14.7 lbf/in², the specific volume of water is 0.01604 ft3/lb, and the acceleration of gravity is g = 32.0 ft/s². Patm = 14.7 lbf/in.² g= 32.0 ft/s² Step 1 Water v = 0.01604 ft³/lb Determine the difference in pressure between points a and b, in lbf/in². Does the pressure increase or decrease from point a to point b? Determine the difference in pressure between points a and b, in lbf/in². Pb-Pg=i lbf/in² 4

Water flows through a Venturi meter, as shown in the figure. The pressures of the water at locations a and b in the pipe support columns of water that differ in height by L = 10 in. The atmospheric pressure is 14.7 lbf/in², the specific volume of water is 0.01604 ft3/lb, and the acceleration of gravity is g = 32.0 ft/s². Patm = 14.7 lbf/in.² g= 32.0 ft/s² Step 1 Water v = 0.01604 ft³/lb Determine the difference in pressure between points a and b, in lbf/in². Does the pressure increase or decrease from point a to point b? Determine the difference in pressure between points a and b, in lbf/in². Pb-Pg=i lbf/in² 4

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A liquid of specific gravity 1.3 flows in a pipe at a rate of 800 l/s, from point1 to point 2 which is 1 m above point 1. The diameters at section 1 and 2 are 0.6 mand 0.3 m respectively. If the pressure at section 1 is 10 bar, determine the pressureat section 2.
Water moves through a constricted pipe in steady,ideal flow. At the lower point shown in the figure, thepressure is P1 = 1.75x104Pa and the pipe diameter is6.00 cm. At another point y = 0.250 m higher, thepressure is P2 = 1.20 x 104Pa and the pipe diameter is3.00 cm. Find the speed of flow (a) in the lower sectionand (b) in the upper section.(c) Find the volume flow rate through the pipe.Ans. ( (a) 0.638 m/s (b) 2.55 m/s (c) 1.80 x 10-3 m3/s ).
The pressure in a section of a horizontal pipe of diameter d1 = 2.0 cm is p1 = 142 kPa. The water flows through the pipe at a volumetric flow rate V = 2.8 L/s. If the pressure at a certain point is reduced to p2 = 42.6 kPa, due to a throttling of a pipe section, what should the diameter d2 of the throttling section be? Consider the density of water ρ = 1.0 g/cm3. Choose the correct option:
Water flows through a pipe at 15 L/s as shown. If the gage pressure of 12.5 kPa, 11.5 kPa and 10.3 kPa are measured for P1, P2 and p3, respectively, what are the head loss between 1-3 in meters.
Ethanol with a density of 789 kg/m3 moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is P1 = 1.90 ✕ 104 Pa, and the pipe diameter is 5.00 cm. At another point y = 0.35 m higher, the pressure is P2 = 1.15 ✕ 104 Pa, and the pipe diameter is 2.50 cm. (a) Find the speed of flow (in m/s) in the lower section. (b) Find the speed of flow (in m/s) in the upper section. (c) Find the volume flow rate (in m3/s) through the pipe.
2.4) A pipe discharges 142 lps of water into a reservoir at a point 1.85 m below the water surface. At point A the diameter is 25.4 cm and the center of the pipe is 1.25 m above the water surface. At the discharge end the pipe is 30.5 cm. If the head loss from A to the reservoir is 0.7 m, determine the pressure in A.
A pump is installed in a pipe system, where at the suction side 1.0 m below the pump, an open manometer reads a vacuum of 20 cm of mercury. The pipe is 10 cm in diameter and the flow is 35 L/s of water. Find the total energy at the location of the manometer, relative to a datum, through the pump. A. -4.67m B. 12.74m C. -2.72m D. 2.56
Calculate the velocity values in the D and E sections of the system in the figure. AE/AD= 3, Z1=1.6 m and Z2=0.2 m. The mercury deviation in the manometer is Z3=0.4 m. (Friction effects will be neglected, γmercury=13.6 t/m3 , γwater=1 t/m3).
Fluid flows through the venture tube shown below. Pressure at section 2 is equal to 100 kPa. If pressure at point 1 is 200 kPa, determine the manometer reading h? Density of fluid and mercury are 800 kg/m^3 and 13500 kg/m^3, respectively. a)80.29 cm b)1.861 m c)1.2 m d)75.53 cm e)25.49 cm
Water flows from a pressurized tank (in figure below), through a 10.0 cm diameter pipe, exits from a 5.0 cm diameter nozzle, and rises 5.0 m above the nozzle. Determine the pressure in the tank if the flow is steady, frictionless, and incompressible.
A pipe of diameter 11 cm conveying 200 liters/s of water has bend of angle (θ = 90⁰if last digit is zero/even and θ = 0⁰ if last digit is odd) through horizontal plane. Find theresultant force exerted on the bend if the pressure at the inlet and outlet of the bend are 15N/cm2 and 10 N/cm2respectively.
The oil flows through the vertical venturi tube as shown in the figure. The venturi inlet has a diameter of 20 cm, the isthmus of the venturi is 10 cm in diameter, the pressure at inlet P1 is 41.4 kPa(gage), and the pressure at the isthmus P2 is the same size as the body of water. The same oil which is 1.52 m. Find the flow rate of this oil. The density of the oil is 849 kg/m3.