i need the answer quickly water is heated from 15°C to 50°C passing through a tube of 2.5 cm diameter. The velocity of water is 1.2m/min, the outer surface of tube is heated by an electric heater providing uniform heat flux of 15 kW/m².Find outPIRATa) The length of tube required.b) Tube surface temperature at the exit.Take the following properties of water at average temperature of 33°C:p = 995 kg/m³, Cp = 4.175 kJ/kg. °C, k = 0.615 W/m. °C, -0.8 x 10³ N.s/m².

Answered: Image /qna-images/answer/24ebba57-db99-4fab-88d1-2bd8c15d1d1a.jpg

water is heated from 15°C to 50°C passing through a tube of 2.5 cm diameter. The velocity of water is 1.2 m/min, the outer surface of tube is heated by an electric heater providing uniform heat flux of 15 kW/m². Find out a) The length of tube required. b) Tube surface temperature at the exit. Take the following properties of water at average temperature of 33°C: p=995 kg/m³, Cp = 4.175 kJ/kg. °C, k = 0.615 W/m. °C.08 × 10³ N s/m²

water is heated from 15°C to 50°C passing through a tube of 2.5 cm diameter. The velocity of water is 1.2 m/min, the outer surface of tube is heated by an electric heater providing uniform heat flux of 15 kW/m². Find out a) The length of tube required. b) Tube surface temperature at the exit. Take the following properties of water at average temperature of 33°C: p=995 kg/m³, Cp = 4.175 kJ/kg. °C, k = 0.615 W/m. °C.08 × 10³ N s/m²

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter7: Forced Convection Inside Tubes And Ducts

Section: Chapter Questions

Problem 7.27P

See similar textbooks

Similar questions

7.43 Liquid sodium is to be heated from 500 K to 600 K by passing it at a flow rate of 5.0 kg/s through a 5-cmID tube whose surface is maintained at 620 K. What length of tube is required?
A mild-steel cylindrical billet 25 cm in diameter is to be raised to a minimum temperature of 760C by passing it through a 6-m long strip-type furnace. If the furnace gases are at 1538C and the overall heat transfer coefficient on the outside of the billet is 68W/m2K, determine the maximum speed at which a continuous billet entering at 204C can travel through the furnace.
n electric generator at a power plant produces energy by passing superheated steam from a high temperature container (reservoir), through a pipe connected to a series of fans, and then into a low temperature reservoir. As the steam passes across the blades of the fans some of the heat energy of the steam is transformed into mechanical energy, which turns the fans which in turn are connected to a generator, which in turn converts the mechanical energy into electrical energy. If the high temperature steam has a temperature of 412.1 K and the low temperature reservoir has a temperature of 105.4 K, what is the Carnot efficiency of this process?
a)Identifythe maximum velocitylimitof ammonia gas in the pipe if the flow is to be maintained as laminar flow. b)If the actual velocity of ammonia gas is 0.9 times the maximum velocitylimit, calculatethe heat transfer coefficient and heat transfer flux if the heat transfer area is 0.16m^2. c)Suppose the pipe has an outer diameter of 43.1 mm and the outer surface wall temperature of the pipe is 356 K, determinethe thermal resistance and thermal conductivity of the pipe.
Conceptually, what is the integral of heat transfer rate, Q dot?
Heat transfers Air is to be heated from 15 C to 270 C, as it flows through a tube 25mm diameter at average velocity 30 m/s. The tube surface is maintained at 280 C and the air is to be provided at rate 0.013 kg/s. Take the water properties k=0.0336 W/m.C , υ = 25.9× 10-6 m2/s , Cp=1.014 kJ/kg.C , ρ = 0.8826 kg/ m3 , Pr=0.689 . Determine the following The necessary tube length Heat transfer coefficient Heat transfer rate
A household radiator has an inlet temperature of 73.2 oC and an outlet temperature of 42.5 oC. The water flows through the radiator at a steady rate of 1×10-5 m3 s-1 and the radiator has reached a steady temperature. Given that the density of water is 1000 kg m-3 and its specific heat capacity is 4200 J kg-1 K-1, calculate the rate of heat loss (in W or J s-1) from the radiator.
A pure copper cube 3 cm on each side is placed in a 15°C stream of water.If the initial temperature of the cube is initially at 215°C, how long does it take the cube to drop to 25°C? The convective heat transfer coefficient is 80W/m2∙K. Justify any assumptions.
A circular tube (internal diameter=8 mm, length=20 m) subjected to a uniform heat flux of 30000 W/m2 on its surface. Water (ρ=1000 kg/m3, k=0.6 W/mK, ν=8x10-7 m2/s, cp=4.2 kJ/kg0C, Pr=6) enters the tube at 15 oC with a velocity of 1.1 m/s and leaves at 50 0C. Surface temperature of the tube at the inlet is
consider a flow of water in a cylinder maintained at constant temperature of hundred degree Celsius the diameter of the cylinder is 15 and the length of the tube is 6 metre the inlet and outlet temperature of the water is TI equal to 15 degree Celsius and equal 57 degrees celsius find the average heat transfer Coefficient associated with the flow of water mass flow rate is 2.25 kilogram per second and cp=4.178KJ/aKg.K
The blades of a wind turbine turn a large shaft at a relatively slow speed. The rotational speed is increased by a gearbox that has an efficiency of 0.93. In turn, the gearbox output shaft drives an electric generator with an efficiency of 0.95. The cylindrical nacelle, which houses the gearbox, generator, and associated equipment, is of length L = 6 m and diameter D = 3 m. If the turbine produces P = 2.5 MW of electrical power, and the air and surroundings temperatures are T = 25 oC and Tsur = 20 oC, respectively, determine the minimum possible operating temperature inside the nacelle. The emissivity of the nacelle is 0.83, and the convective heat transfer coefficient is h = 35 W/m2 .K. The surface of the nacelle that is adjacent to the blade hub can be considered to be adiabatic, and solar irradiation may be neglected. Use Fin or N number of fins to reduce the Ts of the nacelle less than 143 oC
1. Moist air enters a refrigeration coil at 89 F dry-bulb temperature and 65 F thermodynamic wet bulb temperature at a rate of 14oo cu ft per min. The surface temperature of the coil is 55 F . If 3.5 tons of refrigeration are available, find the dry bulb and wet bulb temperatures of the air leaving the coil. Assume sea level pressure.