You are to spray an 80-acre field that will be planted to alfalfa with 32 oz/ac Roundup, 1.5 pints/ac of Treflan, and 17lbs AMS/100 gallon spray. If your sprayer is calibrated to apply 10GPA carrier volume and holds 800-gallons how much AMS do you need to add to your sprayer to condition your water, and how many gallons of Roundup and Treflan do you need to add to your sprayer so that you apply the proper rate?

You are to spray an 80-acre field that will be planted to alfalfa with 32 oz/ac Roundup, 1.5 pints/ac of Treflan, and 17lbs AMS/100 gallon spray. If your sprayer is calibrated to apply 10GPA carrier volume and holds 800-gallons how much AMS do you need to add to your sprayer to condition your water, and how many gallons of Roundup and Treflan do you need to add to your sprayer so that you apply the proper rate?

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter11: Heat Transfer By Radiation

Section: Chapter Questions

Problem 11.12P

See similar textbooks

Similar questions

A 5-feet diameter Chimney is designed to handle a flue gas produced in a steam power plant at a rate of 17 lb/s. The barometric pressure is 29.92-inch Hg. Outside air enters the combustion chamber at 90 F. The average temperature of the flue gas inside the Chimney is 572 F and its molecular weight is 30. Cv = 0.35, Rair = 53.342 ft-lb/lb-R. Calculate: a. The total draft, feet of air. b. The height of the Chimney, feet
HVAC (Already answered here in bartleby. Do not copy. Calculations are needed.) UPVOTE WILL BE GIVEN. ANSWERS ARE GIVEN ALREADY. PLEASE WRITE THE COMPLETE SOLUTIONS. A room contains moist air with a dry bulb temperature of 25°C and a wet bulb temperature of 21°C. Find a) Specific Humidity (Ans. W = 0.0139) b) Relative Humidity (Ans. RH = 69%) c) Specific Volume (Ans. V = 0.863 m³/kg) d) DPT (Ans. DPT = 19.1°C) e) Specific Enthalpy (Ans. h = 60.5kJ/kg)
HVAC (Already answered here in bartleby. Do not copy. Manual Calculations are needed.) UPVOTE WILL BE GIVEN. ANSWERS ARE GIVEN ALREADY. PLEASE WRITE THE COMPLETE SOLUTIONS. A room contains moist air with a dry bulb temperature of 25°C and a wet bulb temperature of 21°C. Find a) Specific Humidity (Ans. W = 0.0139) b) Relative Humidity (Ans. RH = 69%) c) Specific Volume (Ans. V = 0.863 m³/kg) d) DPT (Ans. DPT = 19.1°C) e) Specific Enthalpy (Ans. h = 60.5kJ/kg)
1. In less than 100 words, describe how the reciprocating air compressors (applicable to a particular purpose) can be improved in terms of sustainability in terms of energy use and pollution effect. 2. Cost implications or projections data/calculations from the idea(s)
This is from Chapter 10 of Sustainable Energy second edition by Richard Dunlap Two locations have the same average wind velocity. Location A has a constant wind velocity of 10 m/s, while Location B has a wind velocity of 5 m/s for 12 hours per day and a wind velocity of 15 m/s for 12 hours per day. Compare the total energy produced per day for identical wind turbines at the two locations. The energy is given by the formula E = 0.5*(air density)*(efficiency)*velocity^3*(Turbine area)*time. Keep the answer in terms of (efficiency)*(Area). **Also is v average velocity or regular, non-average velocity?***
Compute the potential evaporation for amsterdam for the month of july if the net radiation is 361 Watts square meter temperature is 15 degrees celsius, transfer coefficient is 0.00298 mm per day pascal, 50% relative humidity, wind speed 1.26 m/s and psychometric constant of 36 pascal per degree celsius use energy balance, aerodynamic and combined method
1. A LEV system has a centrifugal fan rotating at 714 rpm. The airflow is 6210 cfm, the fan total pressure is 4.07” w.g., and the brake horsepower is 3.12 hp. If the rotating speed is decreased to 620 rpm, what are the brake horsepower? a. 1.43 hp b. 2.04 hp c. 2.41 hp d. 2.67 hp 2.A LEV system has a centrifugal fan rotating at 714 rpm. The airflow is 6210 cfm, the fan total pressure is 4.07” w.g., and the brake horsepower is 3.12 hp. If the rotating speed is decreased to 620 rpm, what are the new value for fan total pressure? 4.15" w.g. 3.87" w.g. 3.07" w.g. 3.94" w.g.
A Boeing 767 due to fly from Montreal to Edmontonrequired refueling. Because the fuel gauge on the aircraft was not working, a mechanic used a dipstick todetermine that 7682 L of fuel were left on the plane.The plane required 22,300 kg of fuel to make the trip. Inorder to determine the volume of fuel required, thepilot asked for the conversion factor needed to converta volume of fuel to a mass of fuel. The mechanic gavethe factor as 1.77. Assuming that this factor was in metric units the pilot calculated the volume to beadded as 4916 L. This volume of fuel was added andthe 767 subsequently ran out the fuel, but landed safelyby gliding into Gimli Airport near Winnipeg. The errorarose because the factor 1.77 was in units of pounds perliter. What volume of fuel should have been added?
Subject: Air Pollution Formation and Control Do not just copy and paster other online answers Correct answer (a) 0.023 psi ; (b) 12,000 MW Show step by step soluction
In a chemistry plant, through a horizontal smooth pipeline with a diameter of 0,3 m, a fluid with density and viscosity of 769 kg/m3 and 0,0007 Pa-s, respectively is flowing with a flow rate of 0,009 m3/s. Disregarding the pipe entrance effects and treating flow being steady, uniform and incompressible; a) Find the magnitude of mean velocity (in m/s). (Please use only 3 decimal digits.) b) Find Reynolds number. (Please do not use any decimal digit.) c) Find the magnitude of friction factor. (Please use 4 decimal digits.)
It is desired to meet the fresh air and heating needs of the 120-person lecture hall of the Faculty of Engineering with a ventilation plant. The angle of separation of the secondary channel from the main channel is 50°. Calculate the required fresh air flow, economic heat. Air per person = 20 m3/h, Cp = 0.24 kcal/kg°C, Density = 1.15 kg/m3 Determine the values not given by yourself in accordance with engineering standards.
Estimate the increased pressure of the gage pressure reading on an automobile tire is 35 psi when the temperature is 0oF. The automobile is driven to a warmer climate and the temperature increases to 120oF. Ans. Choices: (a. 42.48psig b. 58.91psig c. 47.97psig d. 54.24 psig)