Q21is x10s 15.0 brass alloy, the stress at which plastic deformation begins is 50,000 psi, and the modulus of elasticityWhat is the maximum load that can be applied to a specimen with a cross-sectional area of 0.2 in.² withoutplastic deformation?b) If the original specimen length is 3.0 in., what is the maximum length to which it can be stretched withoutcausing plastic deformation?3/A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa and an original diameter o0 nim experiences only elastic deformation when a tensile load of 8900 N is applied. Compute the maximurength of the specimen before deformation if the maximum allowable clongation is 0.25 mm.

As per our guidelines we are supposed to solve only one question if multiple questions are asked .…

021 >) For brass alloy, the stress at which plastic deformation begins is 50,000 psi, and the modulus of elasticity is 15.0 x10 psi. plastic deformation? what is the maximum load that can be applied to a specimen with a cross-sectional area of 0.2 in.² without b) If the original specimen length is 3.0 in., what is the maximum length to which it can be stretched without mausi ng plastic deformation? 107 and an original diameter o

021 >) For brass alloy, the stress at which plastic deformation begins is 50,000 psi, and the modulus of elasticity is 15.0 x10 psi. plastic deformation? what is the maximum load that can be applied to a specimen with a cross-sectional area of 0.2 in.² without b) If the original specimen length is 3.0 in., what is the maximum length to which it can be stretched without mausi ng plastic deformation? 107 and an original diameter o

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Request: Can you please help me with answering the following question? Thank you. Question: A specimen of a ceramic material having an elastic modulus of 250 GPa (36.3 x 106 psi) is pulled in tension with a stress of 750 MPa (109,000 psi). Will the specimen fail if its “most severe flaw” is an internal crack that has a length of 0.20 mm (7.87 x 10-3 in.) and a tip radius of curvature of 0.001 mm (3.94 x 10-5 in.)? Why or why not?
Q: For a bronze alloy, the stress at which plastic deformation begins is 280 MPa, and the modulus of elasticity is 115 GPa. (a) What is the maximum load that may be applied to a specimen with a cross-sectional area of 325 mm? without plastic deformation? (b) If the original specimen length is 120 mm, what is the maximum length to which it may be stretched without causing plastic deformation?
10. A torsion test shows that the shear modulus of an aluminumspecimen is 4.6 x 106psi. When the same specimen is used in atensile test, the modulus of elasticity is found to be 12.2 x 106psi. Find the Poisson’s ratio for the specimen.
a) Compression tests are generally performed on brittle materials-why?b) How a cast iron specimen fails under compression load?c) Define secant modulus?
A crack has been discovered along the edge of a reinforcing rib in titanium housing. The rib is 0.5 inches thick and 4.0 inches wide. The crack extends completely through the thickness and is about 1.20 inches long. If the housing is subjected to static loading only, and the maximumestimated loading produces a tensile load along the rib axis of 50,000 Ib, should the housing be removed from service? The housing material exhibits a yield strength of 150 ksi and a plane strain fracture toughness of 50 ksi in1/2.
The following engineering tensile properties are given for the 1080 steel:-Yield strength (MPa): 585-Tensile strength (MPa): 965-Elongation to fracture for specimen of 5cm gage length (%): 12A 5cm long circular rod of 1080 steel specimen with a diameter of 1.28cm isloaded to failure in tension. a) What was the maximum load needed to break the specimen?(20 points)b) If necking initiated at 80% of the total elongation, prior to this point thespecimen deformation is uniform, compute the true stress at the point ofnecking initiation.
A tensile test specimen has a starting gage length 50 mm and a cross-sectional area 200 mm2. During the test, the specimen yields under a load of 30,000 N (this is the 0.2% offset) at a gage length of 52 mm.The maximum load of 63,000 N is reached at a gage length of 57 mm just before necking begins. Final fracture occurs at a gage length of 63.5 mm. Determine (a) yield strength, (b) modulus of elasticity, (c) tensile strength, (d) engineering strain at maximum load, and (e) percent elongation.
The following data are obtained from a tensile test of a copper specimen. - The load at the yield point is 157 kN. - Length of the specimen is 23 mm. - The yield strength is 89 kN/mm2. - The percentage of elongation is 45 %. Determine the following Diameter of the specimen, Final length of the specimen, Stress under an elastic load of 18 kN, Young's Modulus if the elongation is 1.3 mm at 18 kN and Final diameter if the percentage of reduction in area is 25 %. Fine this ans 1-Initial Cross-sectional Area (in mm2) 2-The Diameter of the Specimen (in mm) 3-Final Length of the Specimen (in mm) 4-Stress at the elastic load (in N/mm2) 5-Young's Modulus of the Specimen (in N/mm2) 6-Final Area of the Specimen at Fracture (in mm) 7-Final Diameter of the Specimen after Fracture (in mm)
The following data are obtained from a tensile test of a copper specimen. - The load at the yield point is 143 kN. - Length of the specimen is 29 mm. - The yield strength is 71 kN/mm2. - The percentage of elongation is 48 %. Determine the following Diameter of the specimen, Final length of the specimen, Stress under an elastic load of 18 kN, Young's Modulus if the elongation is 1 mm at 18 kN and Final diameter if the percentage of reduction in area is 29 %. Initial Cross-sectional Area 2.01 mm2. The Diameter of the Specimen 1.59 mm. Final Length of the Specimen 42.92 mm. Stress at the elastic load 8955.22 N/mm2. Find: Young's Modulus of the Specimen (in N/mm2) Final Area of the Specimen at Fracture (in mm) Final Diameter of the Specimen after Fracture (in mm)
The following data are obtained from a tensile test of a copper specimen. - The load at the yield point is 143 kN. - Length of the specimen is 29 mm. - The yield strength is 71 kN/mm2. - The percentage of elongation is 48 %. Determine the following Diameter of the specimen, Final length of the specimen, Stress under an elastic load of 18 kN, Young's Modulus if the elongation is 1 mm at 18 kN and Final diameter if the percentage of reduction in area is 29 %. FIND: Young's Modulus of the Specimen (in N/mm2) Final Area of the Specimen at Fracture (in mm) Final Diameter of the Specimen after Fracture (in mm)
Briefly comment on the values obtained for the Elastic Modulus, Yield Strength, Ultimate Strength and Toughness of the test specimen as compared to values of various comparable materials found in the literature. Is the test material comparatively strong? Is it stiff? Is it tough? Yield strength is 186Mpa, elastic modulus is 44.8GPa And the ultimate strength is 238.7mpa
The following data are obtained from a tensile test of a copper specimen. - The load at the yield point is 147 kN. - Length of the specimen is 28 mm. - The yield strength is 75 kN/mm2. - The percentage of elongation is 49 %. Determine the following (i) Diameter of the specimen, ii) Final length of the specimen, iii) Stress under an elastic load of 16 kN, iv) Young's Modulus if the elongation is 1 mm at 16 kN and (v) Final diameter if the percentage of reduction in area is 22 Final Area of the Specimen at Fracture (in mm) Final Diameter of the Specimen after Fracture (in mm) Initial Cross-sectional Area (in mm2)