1. A three phase, 60 Hz, 60 km long transmission line has series impedance Z=0.1+j0.5Q/ km delivers 10 MVA at 38 kV to a load at its receiving end at 0.9 power factor leading. Find the following 1. ABCD parameters 2. Sending end voltage and current

1. A three phase, 60 Hz, 60 km long transmission line has series impedance Z=0.1+j0.5Q/ km delivers 10 MVA at 38 kV to a load at its receiving end at 0.9 power factor leading. Find the following 1. ABCD parameters 2. Sending end voltage and current

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter5: Transmission Lines: Steady-state Operation

Section: Chapter Questions

Problem 5.1P: A 30-km, 34.5-kV, 60-Hz, three-phase line has a positive-sequence series impedance z=0.19+j0.34/km....

See similar textbooks

Related questions

Q: A 230-kV, three-phase transmission line has a per phase series impedance of z = 0.05 + j0.45 Ω per…

A: Given 230-kV z = 0.05 + j0.45 Ω per Km y = j3/4 × 10−6 siemens per km. It delivers 200 MVA, 0.8…

Q: A single-phase, 50 Hz, 120 km transmission line delivers 50 MVA at 0.86 lagging power factor at 132…

A: Nominal T- Network of a medium transmission line: Given: To find:

Q: A 230-kV, three-phase transmission line has a per phase series impedance of z = 0.05+j0.45 Ω per Km…

Q: 230 kV, three-phase transmission line has a per phase series impedance of z = (0. 05 + j0.45) ΩΩ per…

Q: 2. A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0-85 p.f. lagging by means of a…

A: Balance 3 phase system. Load is 30MW, 132kV at 0.85 PF lagging. Impedance of transmission line =…

Q: 2. A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0-85 p.f. lagging by means of a…

Q: transmission

Q: a) Obtain ABCD parameters using the nominal t model. b) Obtain sending voltage V, and the current I,…

Q: A 350-km 450-kV, 60-Hz three-phase uncompensated line has a series reactance x=0.34 Ω/km and shunt…

Q: Question 2 A three-phase 50Hz 275kV 200km nominal-pi medium-length transmission line has the…

A: ABCD Parameter: The ABCD parameters gives information about the relationship between the output…

Q: A 210-km, 192-KV, 60 Hz three-phase line has a positive-sequence series impedance z= 0.06+j0.4 Q/km…

Q: The ABCD constants of a lossless three-phase, 500-kV transmission line are A = D = 0.86 + j0 B = 0 +…

A: Solution (a) 3 Vr Ir =1000x106Ir = 1000 x106 x1033x500x103 =1154. 7 A (0.8-j0.6)Vs = AVr+BIr…

Q: A 230-kV, three-phase transmission line has a per phase series impedance of .... (please see…

A: We only answer the first three parts of a question on this platform, unless specified otherwise.…

Q: The A and C constants of a medium length transmission line is 0.936 + j0.016 ohms and (-5.18 + j914)…

A: Basic problem on transmission line in power system.

Q: (b) A three-phase 765 kV, 60 Hz, 300 km transmission line is characterized by the following positive…

A: π approximation can be done on any transmission line But generally used in medium transmission…

Q: A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0·85 p.f. lagging by means of a…

A: The three load Z1, Z2 and Z3 have a similar size and stage point, at that point, the 3 stage load is…

Q: The per-phase constants of a 345-kV, three- phase, 150-km-long transmission line are resistance =…

A: we have given the per-phase constants of a 345-kV three phase 150km long transmission line are…

Q: Q1: The parameters of long three-phase transmission line 200 km with 50 Hz are l = 1.3 mH/km, c = 9…

A: Given length of the line, l=200km. The impedance per unit is calculated as

Q: A 132-kV, 50HZ, three-phase transmission line has a per phase series impedance of z = 0.11 0/km and…

Q: A 210-km, 192-KV, 60 Hz three-phase line has a positive-sequence series impedance z= 0.06+j0.4 Q/km…

A: Explanation: a) The general expression for ABCD parameters is VSIS = ABCD VRIR ...(i) Length of the…

Q: The per-phase constants of a 345-kV, three-phase, 150-km-long transmission line are resistance = 0.1…

A: we need to determine the sending-end voltage.

Q: A short, three-phase subtransmission line has an impedance of 1.5 + j2.4 ohms/conductor. If the line…

Q: A three phase transmission line is 390 km long. The series impedance of the line is (0.315+ j0.653)…

A: Given: A three-phase transmission line is 390 km long. The series impedance of the line is Z=(0.315+…

Q: A 69-kV, three-phase short transmission line is 16 km long. The line has a per phase series…

Q: (b) A three-phase 765 kV, 60 Hz, 300 km transmission line is characterised by the following positive…

Q: (Q) A 10 mile transmission line with an impedance of (0.122+j0.849) Ω per mile is delivering 230A…

A: In this question we need to find a sending end voltage, line efficiency and regulation for the given…

Q: For all three types of transmission line prove that, AD-BC = 1, where ABCD are the transmission line…

A: Transmission line parameters or ABCD parameters are very important for the analysis of ABCD…

Q: A 40-km, 220-kV, 60-Hz three-phase overhead transmission line has a per-phase resistance of 0.15…

Q: A 69-kV, three phase short transmission line is 16km long. The line has a per phase series impedance…

A: We need to determine the sending end voltage, voltage regulation, the sending end power, and…

Q: Q3. A three-phase, 60-Hz, completely transposed 345-kV, 200-km line has the following…

A: Part (a): The total impedance experienced by the transmission line is given by: Z=0.01+j0.2 Ω/km200…

Q: A single circuit, 60 Hz, three phase transmission line is "" long. The line is connected to a load…

Q: A 3-phase, 50 HZ, transmission line represented by TT-model and having the following parameters, A=…

Q: 3. A 36, 345 kV, 60 Hz, 60 km transmission line has a series impedance z = 0.005 + j0.10 N/km. The…

Q: Example 3.3 A three-phase 765-kV, 60-Hz, 300-km, completely transposed line has the following…

Q: (b) A 3-phase transmission line has a resistance per phase of 50 and an inductive reactance of 150…

A: Given 3-phase transmission line Resistance per phase R=5 ΩInductive reactance per phase XL=15…

Q: 2. A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0-85 p.f. lagging by means of à…

Q: (а) Transmission lines can be categorized on the basis of their length. Explain short transmission…

Q: A 400 km long, 50 Hz transmission line having series resistance and inductance of 0.12/km and…

A: Given: A 400 km long, 50 Hz transmission line have Resistance, R=0.1 Ω/km Inductance, L=1 mH/km…

Q: For a given short transmission line of impedance R+jX ohms/phase, the sending end and receiving end…

A: Short transmission line Impedance Z=R+jX ohm/phase Sending end voltage Vs Receiving end voltages VR…

Q: 2. A balanced load of 30 MW is supplied at 132 kV, 50 Hz and 0-85 p.f. lagging by means of a…

Q: power of 90+j70 MVA is drawn from the end of a 220 km three-phase transmission line with a voltage…

Q: A 400kV, 200km, 3-phase transmssion line have the follollowing parameters per phase: z = 0.14+j0.304…

Q: 2. A 200-km, 230-kV, 60-Hz three-phase line has a positive-sequence series impedance z = 0.07 +…

A: To transmit the power over the long distance, power transmission lines are use .it can be overhead…

Q: P 8.5 A single circuit three phase 220kV line runs at no load. Voltage at the receiving end of the…

Q: Example 3.2 A three phase 60HZ completely transposed 345kV, 200km line has two 403mm2 26/2 ACSR…

Q: FEC420 Assignment 1. A 200-km, 230-kv, 60-He three-phase line has a positive-sequence series…

A: We are authorized to answer three sub-parts at a time, since you have not mentioned which part you…

Q: A 230-kV, three-phase transmission line has a per phase series impedance of z = 0.05 + j0.45 2 per…

A: Given Transmission line with Series impedancez=0.05+j0.45 Ω/kmShunt admittancey=j3.4×10-6 S/km L=80…

Q: Three-phase transmission line has ABCD constants as shown below. The line is 80 km long. A =…

A: The transmission line problem can be solved easily.

Concept explainers

Distribution System

The final stage in the delivery of the electric power is the electric power distribution system. From the transmission system to the individual customers it carries electricity. The distribution system is connected with the transmission system and is used to lower the voltage of the transmission to medium voltage in the range of 2 kV to 35 kV with the help of transformers. This medium voltage to the distribution transformers located near the customer's premises is carried by the primary distribution system lines. These distribution transformers in turn lower the voltage to utilization voltage used in lightings, household appliances, industrial equipments etc. Through secondary distribution lines often several customers are supplied from one transformer. It is through service drops, the commercial and residential customers are connected to the secondary distribution system lines. Customers who demand a larger amount of power can be connected directly to the primary distribution system level or the sub-transmission level.

Question

1. A three phase, 60 Hz, 60 km long transmission line has series impedance
Z=0.1+j0.52/km delivers 10 MVA at 38 kV to a load at its receiving end at 0.9 power
factor leading. Find the following
1. ABCD parameters
2. Sending end voltage and current
3. Sending real and reactive power

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A 30-km, 34.5-kV, 60-Hz, three-phase line has a positive-sequence series impedance z=0.19+j0.34/km. The load at the receiving end absorbs 10 MVA at 33 kV. Assuming a short line, calculate: (a) the ABCD parameters, (b) the sending-end voltage for a load power factor of 0.9 lagging, and (c) the sending-end voltage for a load power factor of 0.9 leading.
A 40-km, 220-kV, 60-Hz, three-phase overhead transmission line has a per-phase resistance of 0.15/km, a per-phase inductance of 1.3263 mH/km, and negligible shunt capacitance. Using the short line model, find the sending-end voltage, voltage regulation, sending-end power, and transmission line efficiency when the line is supplying a three-phase load of (a) 381 MVA at 0.8 power factor lagging and at 220 kV and (b) 381 MVA at 0.8 power factor leading and at 220 kV.
A 69-kV, three phase short transmission line is 16km long. The line has a per phase series impedance of 0.125 + j0.4375 ohms per km. Determine the sending end voltage, voltage regulation, the sending end power, and the transmission efficiency when the line delivers:(a) 70 MVA, 0.8 lagging power factor at 64 kV.(b) 120 MW, unity power factor at 64kV.
A 230 kV, three-phase transmission line has a per phase series impedance of z = (0. 05 + j0.45) ΩΩ per Km and a per phase shunt admittance of y = j(3.4×10−6×10−6) siemens per km. The line is 80 km long. Using the nominal ππ model, determine(a) The transmission line ABCD constants. Find the sending end voltage and current, voltage regulation, the sending end power and the transmission efficiency when the line delivers(b) 200 MVA, 0.8 lagging power factor at 220 kV.(c) 306 MW, unity power factor at 220 kV.
A three phase 50 Hz transmission line has impedance of (25.3+ j66.5) ohms and a shunt admittance of 4.42 x 104 mho per phase. If it delivers a load of 50 MW at 220 kV at 0.8 power factor lagging, determine the sending end voltage (a) by short line approximation (b) nominal II method (c) exact transmission line equations.
A 69 kV, three-phase transmission line is 16 km long. The line has a per phase series impedance of 0.125 + j0.4375 ohm/km. Determine the sending end power when the line delivers 70 MVA, 0.8 lagging power factor at 64 kV.
A 230-kV, three-phase transmission line has a per phase series impedance of z = 0.05+j0.45 Ω per Km and a per phase shunt admittance of y = j3.410-6 siemens per km. The line is 80 km long. Using the nominal π model, determine(a) The transmission line ABCD constants. Find the sending end voltage andcurrent, voltage regulation, the sending end power and the transmissionefficiencywhen the line delivers(b) 200 MVA, 0.8 lagging power factor at 220 kV.(c) 306 MW, unity power factor at 220 kV.
Subject: Electrical & Electronics Engineering Course: Power Systems Question: A 160-km, 220-KV, 60 Hz three-phase line has a positive-sequence series impedance z= 0.06+j0.7 Ω/km and a positive-sequence shunt admittance y= j3.88 X 10-6 S/km. At full load, the line delivers 220 MW at 0.8 p.f. lagging and at 200 KV. Using the nominal π circuit, calculate: (a) the ABCD parameters, (b) the sending-end voltage and current, and (c) the percent of voltage regulation. Also explain, in which case the voltage regulation would be negative and why.
2. A 200-km, 230-kV, 60-Hz three-phase line has a positive-sequence series impedance z = 0.07 + j0.58 ohms/km and a positive-sequence shunt admittance y = j4.33 x 10^-6 S/ km. At full load, the line delivers 350 MW at 0.95 pf lagging and at 220 kV. Using the nominal pi circuit, calculate: (a) the ABCD parameters (b) the sending-end voltage and current, and (c) the percent voltage regulation.
Give the physical significance of the generalized circuit constant A,B,C and D of a transmission line. Find the values of A, B, C, D in the following approximate methods in terms of Z and Y (i)simple series impedance method (ii) nominal π method (iii) nominal T method
Solve this math : A 210-km, 192-KV, 60 Hz three-phase line has a positive-sequence series impedance z= 0.06+j0.4 Ω/km and a positive-sequence shunt admittance y= j4.33 X 10-6 S/km. At full load, the line delivers 200 MW at 0.92 p.f. lagging and at 185 KV. Using the nominal π circuit, calculate: (a) the ABCD parameters, (b) the sending end voltage and current, and(c) the percent of voltage regulation. Also explain, in which case the voltage regulation would be negative and why. Note: In the below i have added similer type of math and its ans.In the above math, there is just changes of values. Now solve the math according to the given way solve the math. A 200-km, 230-KV, 60 Hz three-phase line has a positive-sequence series impedance z= 0.08+j0.48 Ω/km and a positive-sequence shunt admittance y= j3.33 X 10-6 S/km. At full load, the line delivers 250 MW at 0.99 p.f. lagging and at 220 KV. Using the nominal π circuit, calculate: (a) the ABCD parameters, (b) the sending-end voltage and…
(Q) A 10 mile transmission line with an impedance of (0.122+j0.849) Ω per mile is delivering 230A at 230kV and 0.8 power factor lagging. Determine: the sending end voltage the line efficiency and regulation