14. The output shaft, with a diamater of 20 mm, from an electric motor drives a compressor on a commercial refrigerator. If the motor operates at 520 RPM and is rated at 600 W, determine the maximum shear stress on the shaft. OAI7.01 MP2 O BI0 87 MPa C14.02 MPa 70)21.3 MMPA

14. The output shaft, with a diamater of 20 mm, from an electric motor drives a compressor on a commercial refrigerator. If the motor operates at 520 RPM and is rated at 600 W, determine the maximum shear stress on the shaft. OAI7.01 MP2 O BI0 87 MPa C14.02 MPa 70)21.3 MMPA

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: .9 The compound shaft consists of bronze and steel segments, both having 120-mm diameters. If the…

A: GIVEN DATA- SHEAR STRESS IN BRONZE SHAFT =100MPa DIAMETER OF BOTH SHAFT =120mm G FOR STEEL=83GPa G…

Q: A mild steel shaft transmits 22 kW at 550 r.p.m. It carries a central load of 900N and is simply…

A: Given Data Power, P=22KW Shaft rpm, N=550 rpm Load, P=900N Length of the beam, L=2.5m Allowable…

Q: 318. A solid compound shaft is made of three different materials and is subjected to two applied…

Q: A steel propeller for a windmill transmits 8.1 kW at 63.4 rpm. If the allowable shear stress in the…

A: To find : The minimum diameter required for a solid shaft . Given : The power is P=8.1KW The speed…

Q: 2- Compare the weight of equal lengths of hollow and solid shafts to transmit a torque T for the…

Q: Q3: Determine the dimensions of a hollow shaft with a diameter ratio of 3:4 which is to transmit 60…

Q: A solid steel circular shaft transmits 18 kW of power at 120 rpm. Determine the minimum diameter of…

Q: A solid shaft of 120 mm diameter transmits 80Kw power at 160 rpm. Taking modulus of rigidity of 80…

Q: A hollow shaft transmits 9 MW at 300 rev/min. It is supposed that the maximum allowable stress is…

A: Given: The power transmitted by the shaft is P=9 MW. The maximum allowable shear stress is ζ=70…

Q: Example1: A solid shaft in a rolling mill transmits 20 kW at 120 r.p.m. Determine the diameter of…

A: The above question is based on Torsion of solid shaft.

Q: A solid shaft is to transmit 22kW at 110 rpm. Determine the diameter of the shaft if the shearing…

Q: One end of the hollow aluminum shaft is fixed, and the other end is connected to a gear with an…

A: Given data: Tangential Force F=45000 N Inner diameter di=7.5 cm=0.075 m Outer diameter do=10 cm=0.1…

Q: Part A The shaft is supported by a smooth thrust bearing at A and a smooth journal bearing at B.…

Q: Q2/ A hollow shaft has to transmit 6MW at 150rev/min. The maximum allowable stress is not to exceed…

Q: The working conditions to be satisfied by a shaft transmitting power are (a) that the shaft must not…

A: GivenG=80000 N/mm2T=1MWattN=240rpmθlim=1oL=15dσallow=55 N/mm2

Q: Q2: A solid steel shaft has a diameter of d and a length of L had used to transmit a power of 120 kW…

Q: B) A wind turbine with an electrical generator rated at 200 k W output. The low speed shaft rotates…

Q: 3.1.2 If the allowable shear stress is 30MPA, what is the maximum power that can be 3.1 The drive…

Q: 10 41. The hydrofioil boat has an A-36 steel propeller shaft that is 30 m long, It is connected to…

A: Given, Length of Shaft (L) = 30 m Power (P)= 2000 kW No. of rotations of shaft = 1700 rpm Outer…

Q: A hollow shaft transmits 7 MW at 200 rev/min. It is supposed that the maximum allowable stress is…

A: Given, P=7 MW=7×106 WN=200 RPMτ=70 MN/m2=70×106 N/m2G=80 GN/m2=80×109 N/m2θL=0.40/m=0.4×π180…

Q: (Q1 A hollow shaft has to transmit 6 MW at 150 rev/min. The maximum allowabl て 180 L=1 stress is not…

Q: Question: A solid shaft is transmitting 1 MW at 240 r.p.m. Determine the diameter of the shaft if…

A: Given data: P=1 MWN=240 rpmTmax=1.2Tmτmax=60 MPa Need to determine the diameter of the shaft.

Q: 78. A motor driving a soiid circular steel shaft transmits 40 kW of power at 500 rpm. If the…

A: Given, Power transmitted by shaft = P = 40 kW = 40000 W Rotational speed of shaft = N = 500 rpm…

Q: A steel marine propeller shaft 13 inches in diameter and 15 ft long is used to transmit 9,426 hp at…

A: GIVEN DATA- D=13in L=15ft P=9426hp N=189rpm G=12*10^6 psi WE HAVE TO FIND SHEAR STRESS

Q: In an industrial machine, two shafts have to be connected by using a muff coupling. The shaft…

Q: Design a hollow shaft required to transmit 11.2 MW at a speed of 300 r.p.m. The maximum shear stress…

Q: 321. A compound shaft consisting of an aluminum segment and * steel segment is acted upon by two…

Q: A generator driven by a wind turbine is required to deliver 2 MW of power at the generator…

A: tip-speed ratio The tip-speed ratio, λ, or TSR for wind turbines is the ratio between the tangential…

Q: A hollow shaft for a rotary compressor is to be designed to transmit a maximum of torque of 4750…

A: Given Data⇒ Hollow shaft Maximum torque : T=4750 N-m Ratio of inside to outside diameter is :…

Q: (6) A solid shaft is used to transmit 75kW @ 550rpm. If the shaft design stress will not exceed…

Q: A Ships propeller shaft tvansmite 7:5 xów at 240 ved/min. the shaft has an interal diameter OF 150m.…

A: Given: Power transmitted=7.5×106WSpped of the shaft=240rpmInternal diameter of the shaft (Di)=150mm…

Q: WHILE TRANSMITTING POWER OF A STEAM TURBINE, THE ANGLE OF TWIST OF A ROTATING SHAFT WAS MEASURED AND…

A: When the force is applied in tangential direction in the plane of transverse cross-section, torque…

Q: A solid shaft is to transmits 22 kW at 110 rpm. Determine the diameter of the shaft if the shearing…

A: Given data as per question Power transmitted =22kw Speed =110 rpm hearing stress =35 Mpa The angle…

Q: (6) A solid shaft is used to transmit 75kW @ 550rpm. If the shaft design stress will not exceed…

Q: 2. A solid shaft is to transmits 22 kW at 110 rpm. Determine the diameter of the shaft if the…

Q: Determine the maximum torsion load, in N-m, that a 20 mm diameter aluminum shaft can carry if its…

Q: Q3.An electric motor is connected to a turbine with the help of a hollow shaft. The hollow shaft has…

Q: A solid circular shaft of steel is transmitting 20 kW of power at 120 rpm. Determine the minimum…

Q: 18.From the Fig.(3). A thin walled tubeis constructed from aluminium alloy with shear modulus G = 30…

A: Given Datar=75mmt=1mmG=30GN/m2 As in question there is not given torque and whole length…

Q: Let's consider a solid circular shaft subjected to the torque loads as shown. Determine the minimum…

Q: Determine the maximum torsion load, in N-m, that a 20 mm diameter aluminum shaft can carry if its…

Q: While transmitting power of a steam turbine, the angle of twist of a rotating shaft was measured and…

A: When the force is applied in tangential direction in the plane of transverse cross-section, torque…

Q: A shaft is used to transmit 67 kw at a speed of 2,281 rev/min. Using a maximum allowable shear…

A: Given data⇒ Power transmitted by shaft (P)=67 KW P=67×103 W Speed (N)=2281 revmin Maximum allowable…

Q: Determine the absolute maximum shear stress in the shaft of Problem

A: Let the diameter of the Bigger shaft is "Y". Let the diameter of the Smaller shaft is "X"

Q: TUEMS 4 Let's consider a solid circular shaft subjected to the torque loads as showns Determine the…

A: Calculated the minimum required diameter of the shaft in mm.

Q: Q2/ A hollow shaft has to transmit 6MW at 150rev/min. The maximum allowable stress is not to exceed…

Q: Q4. The working conditions to be satisfied by a shaft transmitting power are (a) that the shaft must…

Q: A solid shaft is transmitting 1MW at 240rpm . Determine the diameter of the shaft if the maximum…

Q: Q3) A ship's propeller shaft has external and internal diameters of 25 cm and 15 cm. What power can…

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

O Seçimi Temizle
Sonrak
2. Soru
5 Puan
14. The output shaft, with a diamater of 20 mm, from an electric motor drives a compressor on a commercial refrigerator. If the motor operates
at 520 RPM and is rated at 600 W, determine the maximum shear stress on the shaft.
O AJ7.01 MPa
O B10 87 MPa
C14.02 MP
O0121.3 MPa

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Defining the problem

VIEW

Calculating maximum shear stress

VIEW

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A hollow shaft for a rotary compressor is to be designed to transmit a maximum torque of 4750 N-m.The shear stress in the shaft is limited to 50 MPa. Determine the inside and outside diameters of theshaft, if the ratio of the inside to the outside diameter is 0.4. [Ans. 35 mm ; 90 mm]
SS 304 steel shaft is 3 m long and has an outer diameter of60 mm. When it is rotating at 60 rad/s, it transmits 30 kWof power from the engine to the generator. Determine thefollowing: a. The smallest thickness of the shaft if the allowableshear stress is 150 MPa and the shaft is restricted notto twist more than 0.08 rad. Use G for steel = 83 GPa. b. The percentage savings in weight had the generatorutilized a solid shaft. Assume same material, length andtorque capacity.
Torsion Problem 6.0 A solid steel shaft is to transmit 5 hp from the motor to which it is attached. If the shaft rotates at w=160rpm and the steel has an allowable shear stress T=14 ksi, determine the required diameter of the shaft.
The propellers of a ship are connected to an A-36 steel shaft that is 60 m long and has an outer diameter of 340 mm and inner diameter of 260 mm. If the power output is 4.5 MW when the shaft rotates at 20 rad/s, determine themaximum torsional stress in the shaft and its angle of twist.
The propellers of a ship are connected to an A-36 steel shaft that is 60 m long and has an outer diameter of 340 mm and inner diameter of 260 mm. If the power output is 4.5 MW when the shaft rotates at 20 rad>s, determine the maximum torsional stress in the shaft and its angle of twist.
Determine the maximum shear stress acting at a tubular cross-section having an outer diameter D, = 100 mm and inner diameter D; = 80 mm, if the applied torque T = 500 N.m. Take ) = 5.79624 x 108 m?; Select one: O 431MPa O 2.15MPa O 6.15MPa O 1032MPa O 8.62MPa
(6) A solid shaft is used to transmit 75kW @ 550rpm. If the shaft design stress will not exceed 26N/mm2 , determine the diameter of the solid shaft.
a solid shaft is transmitting 1 mw at 240 rpm determine the daimeter of shaft exceed the mean of torque 20% take maximum shear alloy stress as 55mpa
The connecting rod of a four stroke cycle Diesel engineis of circular section and of length 550 mm. The diameter and stroke of the cylinder are 150 mm and240 mm respectively. The maximum combustion pressure is 4.7 N/mm2. Determine the diameter ofthe rod to be used, for a factor of safety of 3 with a material having a yield point of 330 MPa.Find also the maximum bending stress in the connecting rod due to whipping action if the engine runsat 1000 r.p.m. The specific weight of the material is 7800 kg/m3. [Ans. 33.2 mm ; 48 MPa]
A solid shaft is transmitting 1 MW at 240 r.p.m. Determine the diameter of the shaft if the maximum torque transmitted exceeds the mean torque by 20%. Take the maximum allowable shear stress as 60 MPa.
a hollow shaft for a rotary compressor is to be designed to transmit maximum torque of 4750 n-m. the shear stress in the shaft is limited to 50 mpa. determine the inside outside diameter of the shaft if the ratio of inside to outside diameter of the shaft is 0.4
NEED ANSWER ASAP The steel shaft is formed by attaching a hollow shaft to a solid shaft. Determine the shear stress in the solid shaft (in Pa) using the maximum torque T that can be applied to the ends of the shaft without exceeding a shear stress of 70098347 Pa and angle of twist of 2.5ᴼ for the whole shaft. Use G = 83000000000 Pafor the shaft, x = 2.13 m, and y = 1.79 m.