2. A balanced delta connectedconnected to a three-phase,conductors having impedances Zcfollowing,load, with Z= 302 30° , isthree-wire, 250 V system by0.4+j 0.3 0. Obtain the=a) Phase Voltagesb) Line Currentsc) Total Real, Reactive and Apparent Power of the circuitd) Power Factore) Phasor diagram

Answered: Image /qna-images/answer/b76b7fac-be35-450e-8eec-5b182789ab63.jpg

2. A balanced delta connected connected to a three-phase, conductors having impedances Zc following, load, with Z = 30 ≤ 30° , is three-wire, 250 V system by 0.4 + j 0.3 №. Obtain the = a) Phase Voltages b) Line Currents c) Total Real, Reactive and Apparent Power of the circuit d) Power Factor e) Phasor diagram

2. A balanced delta connected connected to a three-phase, conductors having impedances Zc following, load, with Z = 30 ≤ 30° , is three-wire, 250 V system by 0.4 + j 0.3 №. Obtain the = a) Phase Voltages b) Line Currents c) Total Real, Reactive and Apparent Power of the circuit d) Power Factor e) Phasor diagram

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.31MCQ: One advantage of balanced three-phase systems over separate singlephase systems is reduced capital...

See similar textbooks

Similar questions

One advantage of balanced three-phase systems over separate singlephase systems is reduced capital and operating costs of transmission and distribution. (a) True (b) False
The three-phase source line-to-neutral voltages are given by Ean=100,Ebh=10+240, and Ecn=10240volts. Is the source balanced? (a) Yes (b) No
A balanced, positive-sequence, Y-connected voltage source with Eab = 480∠0o volts is applied to abalanced-∆ load with Z∆ = 30 ∠40o Ω. The line impedance between the source and load is ZL = 1 ∠850 Ω.for each phase. Calculate the line currents, the ∆ -load currents, and the voltages at the load terminals.Recall that ZY = Z∆/3
An Alternator having three-phase, 3-wire ABC system supplying an effective line voltage of 120 V, has an athree-impedances of 50 / 45 ohms in Delta connection. Assume that Vbc is the reference vector. Determine a) linecurrent and line voltages with its degrees, b)Draw the current –voltage phasor diagram c) and the power generated inthe line quantities of the alternator.
1. A 69-kV, three-phase short transmission line is 16 km long. The line has a per phase series impedance of 0.125+j0.4375 Ω per km. Determine the sending end voltage, voltage regulation, the sending end power, and the transmission efficiency when the line delivers (a) 70 MVA, 0.8 lagging power factor at 64 kV. (b) 120 MW, unity power factor at 64 kV. Use lineperf program to verify your results. 2. A three-phase, 765-kV, 60-Hz transposed line is composed of four ACSR, l,431,000-cmil, 45/7 Bobolink conductors per phase with flat horizontal spacing of 14 m. The conductors have a diameter of 3.625 cm and a GMR of 1.439 cm. The bundle spacing is 45 cm. The line is 400 km long, and for the purpose of this problem, a lossless line is assumed. (a) Determine the transmission line surge impedance Zc, phase constant ß, Wavelength, the surge impedance loading SIL, and the ABCD constant. b) The line delivers 2000 MVA at 0.8 lagging power factor at 735 kV. Determine the sending end quantities and…
20/ For balanced three phase star connected load, the phase angle difference between VR and VY is 30 degrees. Select one: True False
Consider a DVR compensated single phase system as shown below. a) Without DVR, find the load terminal voltage (VL) if line resistance (Rs) is negligible with Xs = j0.5 pu , ZL = 0.8 + j0.5 pu and Vs= 1pu with angle equals to 0º.b) With DVR, if Vs=VL=1pu with angle equals to 0º, find the voltage Vtand the DVR voltage injected (Vf).
The one-line diagram of a three-phase power system is as shown in the figure attached. Impedances are marked in per unit on a 100-MVA, 400-kv base. The load at bus 2 is S(sub 2) = 15.93 MW - j33.4 Mvar, and bus 3 is S(sub 3) = 77MW + j14 Mvar. I tis required to hold the voltage at bus 3 at 400 angle 0 degrees kV. Working in per unit, determine the voltage at buses 2 and 1.
A balanced 3-phase Y-connected source has using positive phase sequence, ?an = 390∠30˚ ?. Find the complex expression of voltage Eab. Circuits Problem 1
A balanced delta-connected lood with impedance per phase of 30<30 ohms is connected to an abc-sequence balanced three-phase source with eAC = -120√2 cos (120πt + π/6) V through conductors with negligible impedances. Determine the line currents, load phase currents and the total complex power drawn by the lood. Write your values in polar form.
A three-phase, 3-wires CBA System alternator, sending 3-phase voltages of 339.4 volt to the lines, having a delta connected load, with VCA is the reference vector. ZBC = 12.99 – j7.5 ZCA = 8.66 + j5 ZAB = 10 + j0 Determine the phase and line current b) draw the phasor diagram and c) true power generates by the generator neglect the line losses.
A 400V three-phase, four wire system has the following loads connected: Phase 1: load impedance Z1 = 40 + j15 Ω Phase 2: load impedance Z2 = 60 Ω Phase 3: load impedance Z3 = 15 – j20 Ω I am just looking for the working out for phase 2 - please ignore the other phases The line and phase voltages for all phases (including phase angles) The line and phase currents for all phases (including phase angles) The neutral current (including phase angle)