2.1. You are required to determine the flow rate of water in a pipe with the aid of aVenturi installation and a mercury manometer. The expected water velocity is about1,5 m/s. The pipe diameter is 40 mm and the Venturi has a discharge coefficientCa=0,97. Determine what level difference can be expected in the manometer.

Name: 2.1. You are required to determine the flow rate of water in a pipe w
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: 2.1. You are required to determine the flow rate of water in a pipe with the aid of aVenturi installation and a mercury manometer. The expected water velocity is about1,5 m/s. The pipe diameter is 40 mm and the Venturi has a discharge coefficientCa=

Answered: Image /qna-images/answer/7d7f1907-f9c1-4c21-bf78-f36e69fda0c3.jpg

Engineering

Mechanical Engineering

2.1. You are required to determine the flow rate of water in a pipe with Venturi installation and a mercury manometer. The expected water vel 1,5 m/s. The pipe diameter is 40 mm and the Venturi has a discharge Ca=0,97. Determine what level difference can be expected in the mand

2.1. You are required to determine the flow rate of water in a pipe with Venturi installation and a mercury manometer. The expected water vel 1,5 m/s. The pipe diameter is 40 mm and the Venturi has a discharge Ca=0,97. Determine what level difference can be expected in the mand

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Suppose that you are willing to determine the diameter of the water jet impinging to the sink from the kitchen tap.The tap is produced to supply three different flow rates of the low, medium, and high. For each flow rate level, waterthat comes from the tap fills the beaker with a volume of 30 mL in 10 s, 6 s, and 2 s, respectively. The outlet of the tapis 13 mm, and the distance between the tap outlet and the sink is 53 mm. Determine the diameters of the water jetimpinging on the sink at three given flow rates.
In oasis Water Company to purify the water, it is flowing through a reducer in a horizontal pipe where the diameter is reduced from 35 cm to 25 cm. The pressure in the 35 cm pipe just upstream of the reducer is 150 kPa. The fluid has a vapor pressure of 50 kPa and a specific weight of 5 kN/m3. Neglecting frictional effects, calculate flow rate of water through this pipe in lit/s. Draw diagram neatly
9.7. Through a hydraulic turbine flow 2.8 m3/s of water. On the 1 m inlet pipe at elevation 43.5,a pressure gage reads 345 kPa. On the 1.5 m discharge pipe at elevation 39, a vacuum gage reads150 mm of mercury. If the total head lost through pipes and turbines between elevations 43.5and 39 is 9 m, what power may be expected from the machine?
A 10-in. x 6-in. x 12-in. duplex direct-acting steam pump operating at 35 strokes per minute delivers water at a temperature of 150oF. If the slip is 7%, determine the discharge in a. discharge in Answer : __________________ lb/hrb. discharge in Answer : __________________ gpm
An orifice meter with a 5 cm diameter is used to measure the flow rate of liquid. Under a head of 4 m, the velocity of the liquid at vena contracta is 7.5 m/s. If the actual discharge through the pipe is 8 l/s, calculate the coefficients of velocity, discharge, and contraction. Include Free body Diagram
Water at 60°F is pumped from a reservoir to the top of a mountain through a 6-in. Schedule 120 pipe at an average velocity of 12 ft/s. The pipe discharges into the atmosphere at a level 3,000 ft above the level in the reservoir. The pipeline itself is 4,500 ft long. If the overall efficiency of the pump and the motor driving it is 70 percent and the cost of electric energy to the motor is 4 cents per kilowatt hour, what is the hourly energy cost for pumping this water?
A hydraulic pump is required to deliver a flow rate of 1000 liters per minute with a discharge pressure of 20 bar. If the efficiency of the pump is 70%, determine the required power of the pump.
(Q26) A horizontal Venturimeter with inlet radius 110 mm and throat radius of 55 mm is used to measure the flow of water. The pressure at inlet is 20 N/cm2 and the vacuum pressure at the throat is 27 cm of mercury. Find the rate of flow. The value of cd may be taken as 0.9
Given below are pipe lengths, sizes, and connections. All pipes have a friction factor of 0.020. If the flow from Ato B is 5 cfs. a) Determine the head loss in feet in PIPE 1 and PIPE 2 b) Determine the head loss in feet in PIPE 5 c) Determine the flow in the upper branch pipe Q2 in cubic feet per second d) Determine the total head loss in feet between the inlet A and the outlet D
A horizontal pipe line conveys a constant rate of flow which is measured by a venturimeter located in it. The secondary element is a differential manometer. When the manometer is inclined upward in the direction of flow, the deflection on a differential manometer will _______.
Water flows through a horizontal pipe at a rate of 1 gal/s. The pipe consists of two sections of diameters 4 in and 2 in with a smooth reducing section. The pressure difference between the two pipe sections is measured by a mercury manometer. Neglecting frictional effects, determine the differential height of mercury between the two pipe sections
In a venturemeter used for measuring the flow of oil (S = 0.85) through a horizontal pipeline, the pipe diameter is 2.4 times the diameter at the throat. Connections are made from the entrance to the meter and the throat to a vertical U tube containing mercury. If the difference level between the fluids in the U-tube arms is (x +1/S.N ) in cm, where S.N. is student serial number. Neglect friction in the pipe. Find an expression in terms of x for the velocity of the oil in the pipe.