3. A block of mass m= 2.00 kg rests on the left edge of a block of mass M= 8.00 kg. The coefficient of kinetic friction between the two blocks is 0.300, and the surface on which the 8.00 kg block rests is frictionless. A constant horizontal force of magnitude F= 10.0N is applied to the 2.00-kg block, setting it in motion as shown in Figure. The distance L that the leading edge of the smaller block travels on the larger block is 3.00 m. L M F> m (a) Draw a separate free-body diagram for each block. (b) In what time interval will the smaller block make it to the right side of the 8.00-kg block? as (Note: Both blocks are set into motion when the force is applied.) (c) How far does the 8.00-kg block move in the process?

3. A block of mass m= 2.00 kg rests on the left edge of a block of mass M= 8.00 kg. The coefficient of kinetic friction between the two blocks is 0.300, and the surface on which the 8.00 kg block rests is frictionless. A constant horizontal force of magnitude F= 10.0N is applied to the 2.00-kg block, setting it in motion as shown in Figure. The distance L that the leading edge of the smaller block travels on the larger block is 3.00 m. L M F> m (a) Draw a separate free-body diagram for each block. (b) In what time interval will the smaller block make it to the right side of the 8.00-kg block? as (Note: Both blocks are set into motion when the force is applied.) (c) How far does the 8.00-kg block move in the process?

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A box of mass 20 kg moves up a rough plane which is inclined to the horizontal at 25.0o .It is pulled by a horizontal force F of magnitude 250N . The Coefficient of kinetic friction between thr box and the plane is 0.300 a) if the box travels 3.80 m along the plane determine i. The work done on the box by the force F ii. The work done on the box by gravitational force iii. The work done on the box by reaction force and the work done on the box by frictional force v. total work done on the box b) If the speed of box is zero at bottom plane ,calculate it speed when it travellef 3.80 m (given g=9.81m/s2)
1.) A 300-lb block rests on a plane inclined at 36.87° from the horizontal. A 100 lb force pushes this block up the plane. The coefficient of friction between the block and the plane shown is 0.35. If the block is in equilibrium, determine the magnitude of the friction force. a. 63 lb b. 280 lb c. 80 lb d. 84 lb 2.) Find the component of F = 5 Ni + 3 Nj + 2 Nk along the vector r = 3 mi − 4 mj. a. Fr = 5.4 N b. Fr = 4.4 N c. Fr = 6.4 N d. Fr = 5.14 N
A 25-kg package, initially at rest, is being pushed to the right by applying a force P on corner A in the direction shown in the figure. At the instant shown, corner C is already 0.250 m to the right of edge E of the platform. Assume that the coefficients of non-sliding (static) and sliding (kinetic) friction between the package and the platform are ?? = 0.40 and ?? = 0.25, respectively. P = 50.0 N. Further, assume first the block is at rest and is not impending to move. Which best approximates the frictional force between the package and the horizontal platform with the assumption that the block is at rest and is not impending to move? Which of the following best approximates the distance to the left of corner C where the line of action of the normal force crosses base CD of the package? Which of the following is TRUE about the package?
3. Blocks AA and BB of mass 10 kg and 4 kg respectively, are placed on the inclined plane and released. The coefficients of kinetic friction between the blocks and the inclined plane are μAμAmuA = 0.1 and μBμBmuB = 0.5. Neglect the mass of the link
the system blocks shown below is in equilibrium, the weight of block A is 10 kN and for block B is 35 kN . The coefficient of friction between A and surface is 0.2 and between two block A and B is 0.15. Answer the following: The direction of friction force between two blocks which effect on block A is in * First Quarter Second Quarter Third Quarter Fourth Quarter The value of friction force between two blocks is * 5.6 kN 6.4 kN 4.8 kN Non above-mentioned The value of friction force between block A and its surface is * 4.0 kN 5.5 kN 6.2 kN Non above-mentioned The coefficient of friction between block B and surface is * 5 نقاط 0.24 0.63 0.56 0.37 The value of friction force between the block B and it's surface is * 25 kN 35 kN 15 kN Non above-mentioned The system is in * Equilibrium Impending to motion Kinematic
(The complete question is in the picture) Consider a 2.0 [kg] box that is attached to two identical springs that are in their relaxed state when the block is centered on the frictionless horizontal floor. The box is pressed to the left and then was released from rest as shown in the figure. If work done by the left spring is Wby spring = 25 [J], what is the speed of the boxas it passes the center x = 0? A. 8.2 [m/s]B. 7.1 [m/s]C. 3.5 [m/s]D. zero
Khufra works at a spring factory and he was assigned to test a certain spring, whose constant is 50 N/m, attached to a 30-kg block in an incline (θ=30°). With the spring initially at equilibrium position, the block was pushed 0.5 meters up the incline by a 50-N external force applied parallel to the path. If the coefficient of kinetic friction is 0.5, determine the: a) normal force (in Newtons) b) work done by the spring (in Joules)
A mass of 20 kg is suspended from a spring of stiffness 10000 N/m andthe vertical motion of mass is subjected to coulomb friction of magnitude50 N. if the spring is initially displaced 5 cm downwards from its staticequilibrium position. Determine the number of cycles before the bodycomes to rest.
By using a forked rod, a smooth cylinder C having a mass of 0.5 kg is forced to move along the vertical slotted path (r = 0.4 θ) m, where θ is in radians. If the angular position of the arm is θ = (0.3 t3 ) rad, where t is in seconds. The cylinder is in contact with only one edge of the rod and slot at any instant. Find "the force of the rod on the cylinder at the instant t=2s" Find "the normal force of the slot at the instant t=2s" Find the "radius of curvature at t=2s" Find the "ψ angle at t=2s"
consider the mass and pulley system in the attached file. mass m1 = 29 kg and mass m2 = 12kg. the angle of the inclined plane is given and the coefficient of kinetic friction between mass m2 and the inclined plane is uk = 0.12. assume the pulleys are massless and frictionless when mass m2 moves a distance 4.94 m up the ramp, how far downward does mass m1 move? d= ?
A force of 150 N pushes a 100 N block up an incline whose slope is 3 vertical to 4 horizontal. If the coefficient of kinetic friction is 0.12, determine the time required, in seconds, to increase the velocity of the block from 3 to 15 m/sec. The force is applied parallel to the incline.
A block of mass m= 2.0 kg is released from rest on an inclined plane at a height of h = 1.5 m. It moves down the rough incline with slope theta= 30.0°and continues on the horizontal frictionless surface. As shown in the figure, there is a spring with negligible mass and force constant k = 300 N/m. The coefficient of kinetic friction between the block and the incline is 0.250 What is the speed of the block when it gets down on the horizontal surface before it touches the spring? The box continues to move on the horizontal surface and compresses the spring. What will be the maximum compression of the spring?