3. In a boiler the coal having 88% C, 3.8% H2, 2.2% O2 and remaining ash is burnt in the furnace. It is found that CO2 going with flue gases constitute to be 12% and temperature of flue gases is 260° C. The flue gas sample is analyzed using Orsat apparatus at room temperature. Determine the percentage of CO2 that would be there for complete combustion of fuel

3. In a boiler the coal having 88% C, 3.8% H2, 2.2% O2 and remaining ash is burnt in the furnace. It is found that CO2 going with flue gases constitute to be 12% and temperature of flue gases is 260° C. The flue gas sample is analyzed using Orsat apparatus at room temperature. Determine the percentage of CO2 that would be there for complete combustion of fuel

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

When all the products of hydrocarbon fuel ethane (C2H6) are in gaseous phase, the enthalpy of combustion at 25 oC is (- 47484 kJ/kg), find:- a) the internal energy of combustion at 25 oC b) the enthalpy of combustion at 540 oC c) calculate the heat transferred when 0.2 kg of ethane is burned at constant pressure in a cylinder containing 4 kg of air and the temperature of reactants and products being 40 oC and 540 oC respectively.
Q1) A constant volume tank contain 1 mole of C8H18 and 12 mole of O2 gas at a temperature of 25 °C and 1 bar. The contents of the tank is ignited and C;H14 is burned completely and final products temperature is found to be 1700 K. Determine the heat transfer during this process. ( take AHo = -47800 kJ/kg).
A fuel mixture of 60 percent by mass methane (CH4) and 40 percent by mass ethanol (C2H6O), is burned completely with theoretical air. If the total flow rate of the fuel is 10 kg/s, determine the required flow rate of air.
A gaseous fuel with 80% butane, 15% nitrogen and 5% oxygen (on a mole basis) is burned to completion with 120 percent theoretical air that enters the combustion chamber at 30°C and 100 kPa. Determine the volume flow rate of air required to burn fuel at a rate of 2 kg/min.
Determine the enthalpy of combustion (in kJ) when fully-consuming a 23-L tank of ethane. The ethane inside the tank is pressurized to 8 atm at 30 ⁰C.
Liquid propane (C 3 H 8 ) enters a combustion chamber at 25 °C at a rate of 0.05 kg/min where it is mixed and burned with theoretical air that enters the combustion chamber at 7 °C. an analysis of combustion gases reveals that all the hydrogen in the fuel burns to H 2 O but only but only 90% of carbon burn to CO 2 with the remaining 10% forming Co if the exit temperature of combustion gases is 1500 K (a) the mass flow rate of air and (b) the rate of heat transfer from the combustion chamber
Q1) A constant volume tank contain 1 mole ofC7H14 and 12 mole of O2 gas at a temperature of 25 °C and 1 bar. The contents of the tank is ignited and C7H14is burned completely and final products temperature is found to be 1700 K. Determine the heat transfer during this process. ( take dalta Ho = -47800 kJ/kg).
A certain petrol engine fuel contains 86% C and 14% H2 by mass. If the fuel is burnt with 20% excess air and the combustion is complete, estimate the volumetric composition of the products of combustion including water vapor formed *
An ordinary octane gasoline (C8H18) is to burn inside an internal combustionengine cylinder with 50 % excess air. a) Show the actual combustion equation. b)Determine the actual air fuel ratio. c) Determine the mass of wet products of combustionper kg and the mass of dry products of combustion per kg fuel
Liquid propane (C3H8) enters a combustion chamber at 25°C at a rate of 0.05 kg/min where it is mixed and burned with 50 percent excess air that enters the combustion chamber at 7°C. An analysis of the combustion gases reveals that all the hydrogen in the fuel burns to H2O but only 90 percent of the carbon burns to CO2, with the remaining 10 percent forming CO. If the exit temperature of the combustion gases is 1500 K, determine 1-The balanced chemical equation for the actual process 2-Air- Fuel ratio 3-The mass flow rate of air
Ethane (C2H6) is burned with 20% excess air during a combustion process. Assuming completecombustion and a total pressure of 100 kPa, determine:1. the A/F ratio.2. the dew point temperature of the products.
One Kmol of C8H18 is burned with 100% air containing 25 Kmol of O2. Determine the air-fuel ratio for this combustion process.