=i%-8. For a close-coile 12 coils of wire diameter of 16 mm, an, (i) Axial deflection; (ii) Strain energy stored: d helical spring subjected to an axial load of 309 N having d made with coil diameter of 250 mm, find: 4-8. For a close-coiled helical spring subjected to an axial load of 300 N havine12 coils of wire diameter of 16 mm, and made with coil diameter of 250 mm, find:(i) Axial deflection;(ii) Strain energy stored3;uximumsnvrorm factor.Icur Sire

Given, The mean coil diameter, D=250 mm The wire diameter, d=16 mm Number of coils, n=12 Axial load,…

4-8. For a close-coiled helical spring subjected to an axial load of 300 N having 12 coils of wire diameter of 16 mm, and made with coil diameter of 250 mm, find: (i) Axial deflection; (ii) Strain energy stored;

4-8. For a close-coiled helical spring subjected to an axial load of 300 N having 12 coils of wire diameter of 16 mm, and made with coil diameter of 250 mm, find: (i) Axial deflection; (ii) Strain energy stored;

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter8: Applications Of Plane Stress (pressure Vessels, Beams, And Combined Loadings)

Section: Chapter Questions

Problem 8.5.10P: The tensional pendulum shown in the figure consists of a horizontal circular disk of a mass M = 60...

See similar textbooks

Related questions

Q: A prismatic bar with a circular cross section is loaded by tensile forces P 65kN. The bar has length…

A: Given, Initial length of the bar, Li=1.75 m Initial diameter of the bar, di=32 mm=0.032 m Applied…

Q: A helical compression spring is made of a specialty alloy wire with a wire diameter d = 4 mm and an…

A: Given data: Helical compression spring Diameter, d = 4 mm Inner diameter,…

Q: An aluminum tube of outer diameter R, = 50 mm is heated such that it is mounted over a steel shaft…

A: Find the maximum shear stress in shaft 1.

Q: Steel rod (E:200 aPe) is loaded axially with tensice force of 100 KN. Find the sesess in the sod and…

A: Given, Young's modulus of steel rod = E = 200 GPa = 2 x 105 MPa Tensile force = 100 kN = 1 x 105 N…

Q: H.W. Theories Of Failure A cylindrical shaft made of steel of yield strength ôy MPa is subjected to…

A: Given: Yield strength= δyBending moment=M KN.mPower=P KWr.p.m.=NFactor of safety=F.S.E=210…

Q: An 18 coils helical spring having a load of 100kg. The modulus of elasticity in shear of spring is…

A: Given:n=18m=100 kgG=96.62 GPaD=9.256 cmd=9.525 mm

Q: the height (in mm) of cross section from strength calculation h = ?

A: working stress = yeild stress/ factor of safety = 220/1.6 = 137.5 MPa

Q: An 18 coils helical spring having a load of 100kg. The modulus of elasticity in shear of spring is…

Q: A close coiled helical spring that is made of a material with a shear modulus of 150 GPa, has a wire…

Q: The frame found in the figure is at 6.0 kN/m and P = 19.0 kN. All the bars of the frame have…

A: A consistently disseminated load (UDL) is a heap that is appropriated or spread across the entire…

Q: (Q6) A solid spring steel shaft in small engine with 5hp at 3000rpm is used as a torque measuring…

Q: A cantilever beam made of cold drawn carbon steel of circular cross-section as shown in Figure, is…

A: Given : Wmin = – F ; Wmax = 3 F ; F.S. = 2 ; Kt = 1.42 ; q = 0.9 ; σu = 550 MPa= 550 N/mm2 ; σy= 470…

Q: 1. Mean diameter D, inside diameter Din and spring index 2. The expected stress at the operating…

A: We are to determine the dimensions of the spring and the expected stress and deflection of the…

Q: A stepped steel shaft shown below is subjecte to 10 N-m torque. If the moduius of rigidity 80 GPa,…

A: Given:Torque, T=10 N-mG=80 GPad1=50 mmd2=25 mmL=100 mm

Q: (a) Draw neat illustrative sketches to bring about the difference between a helical coil tension…

A: Helical spring -These types of springs are made of wire. These springs are supposed to carry load in…

Q: 3. A leaf spring in an automobile is subjected to cyclic stresses. The average stress = 150 MPa;…

A: Given Data The average stress is: Savg=150 MPa The variable stress is: Sγ=500 MPa Yield point…

Q: composite spring has two closed coiled springs connected in series, each spring has 12 coils at a…

Q: (a) A helical spring is made from a wire of 8 mm diameter and has outside diameter of 80 mm. If the…

A: helical spring is to be designed according to the given parameters and conditions. The whole…

Q: The stepped shaft in the figure transmits 19.2 kW of power at 180 rpm. Maximum strain Determine the…

A: given data;power transmitted(P)=19.2KW =19.2*103w…

Q: A close-coiled helical spring is made of a wire of diameter 20 mm. The mean radius of the coils is…

Q: A solid circular rod with a a circular groove (r = 1.5 mm) and diameter D = 18 mm, Q4 is subjected…

A: The value of the diameter (d), is: d=D-2r=18-2(1.5)=15 mm Now use the Poison's ratio (0.32) and…

Q: Find the resulting strains in a unidirectional lamina subjected to normal tensile stresses of 20MPA…

Q: Two coaxial closed coil springs make up a standard compound helical spring. When both springs are…

Q: Consider the steel arm assembly in the figure below that supports load R. Using the Coulomb-Mohr…

A: For solution refer below images.

Q: A helical spring in which the mean diameter of the coil is 8 times the wire diameter is to be…

A: Given data: Calculate the spring index as follows: Write the expression to calculate the Wahl…

Q: A composite shaft consists of a brass sleeve securely bonded to half steel shaft, fixed at end A as…

Q: Consider a uniform rod of 1m length having rectangular cross section (see figure) with one end…

Q: . Consider a steel alloy having the stress-strain diagram shown in the figure below: 1. Determine…

A: (As per policy experts are allowed to answer only one question (first one), for the remaining please…

Q: An open-coiled helical spring consists of 12 coils, each of mean diameter 60 mm, wire diameter 6 mm…

A: A spring is a mechanical device which is used for the efficient storage and release of energy.…

Q: 3. A leaf spring in an automobile is subjected to cyclic stresses. The average stress = 150 MPa;…

Q: A thin aluminumplate profile shown in the accompanying figure is subjected to an axial load.…

A: Draw a diagram diving the given plate into different areas and also draw the equivalent stiffness…

Q: xially Statically Indeterminate Structures 2.4-1 The assembty showa in the figure consists of a…

A: Givenbrass diameter d1=0.25insteel shell inner diameter d2=0.28insteel shell outer diameter…

Q: Let's consider a solid circular rod having a diameter D = 30 mm subjected to a triangular…

A: Given: The diameter of rod, D = 30 mm The elastic modulus, E = 4 GPa The intensity of load…

Q: Coefficient of expansion αB= 165.10^-7 1/ 0C , solid copper bar diameter 20 mm , It is placed in a…

A: From the given description: From continuity equation,

Q: A torsion dynamometer is fitted on a turbine shaft to measure the angle of twist. It is observed…

Q: shaft is subject to the stresses at the tip point as given below; Tmean = 100 Nm, Taiternating= 50…

Q: helical spring in which the mean diameter of the coil is 8 times the wire diameter is to be designed…

A: Given:

Q: Problem. A load of 98 kg is supported by a wire of length 1.8 m and cross-sectional area 0.12 cm.…

Q: Q A cylindrical shaft made of steel of yield strength 700 MPa is subjected to static loads…

Q: A leaf spring in an automobile is subjected to cyclic stresses. The average stress = 150 Mpa;…

A: Given Data The average stress is: Savg=150 MPa The variable stress is: Sγ=500 MPa Yield point…

Q: A steel shaft in the form of a solid body circular rod or a circular tube can be manufactured.…

Q: circular shaft of diameter D, groove diameter d, and groove radius r is subjected to a fully…

A: Given-

Q: The stepped shaft in the figure transmits 19.2 kW of power at 180 rpm. Maximum strain Determine the…

Q: PProb. 2.8-10. A load W is to be suspended from a cable at end C of a rigid beam AC, whose length is…

A: Given Data The stress acting in the y axis for the rod BD is: σy=250 MPa The modulus of elasticity…

Q: Steel bar with a diameter of 20 mm in the figure, an outer diameter of 40 mm to 20 mm tightly…

Q: The two-segment statically indeterminate bar in Fig. has a constant cross-sectional area A = 0.8…

Q: Consider a bar of cast iron under complex loading. The bar is subjected to a bending moment of M =…

Q: An 18 coils helical spring having a load of 100kg. The modulus of elasticity in shear of spring is…

A: As per our guidelines we are supposed to solve only 3 subparts if multiple subparts are asked .…

Concept explainers

Strain energy

The term strain indicates the variation in an object's length, area, and volume when the object is subjected to an external force. The external force may be of normal, shear, moment, torque, etc. The strain in an object depends on the types of external force and cross-section of the object. Mathematically, the evaluation of strain can be obtained with the help of elastic constants.

Question

=i%-8. For a close-coile 12 coils of wire diameter of 16 mm, an, (i) Axial deflection; (ii) Strain energy stored: d helical spring subjected to an axial load of 309 N having d made with coil diameter of 250 mm, find:

4-8. For a close-coiled helical spring subjected to an axial load of 300 N havine
12 coils of wire diameter of 16 mm, and made with coil diameter of 250 mm, find:
(i) Axial deflection;
(ii) Strain energy stored3;
uximum
snvrorm factor.
Icur Sire

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The inclined beam represents a ladder with the Following applied loads: the weight (W) of the house painter and the distributed weight (u) of the ladder itself. Find support reactions at A and B: then plot axial force (N), shear (V), and moment (M) diagrams. Label all critical N, V, and M values and also the distance to points where any critical ordmates are zero. Plot N, V, and M diagrams normal to the inclined ladder. Repeat part (a) for the case of the ladder suspended from a pin at B and traveling on a roller support perpendicular to the floor at A.
Solve the preceding problem if the collar has mass M = 80 kg, the height h = 0.5 m, the length L = 3.0 m, the cross-sectional area A = 350mm2. and the modulus of elasticity E = 170 GPa.
Obtain a formula for the strain energy U of the statically indeterminate circular bar shown in the figure. The bar has fixed supports at ends A and B and is loaded by torques 2T0and T0at points C and D, respectively. Hint: Use Eqs. (3-50a and b) of Example 3-9 to obtain the reactive torques.
The inclined ladder AB supports a house painter (85 kg) at C and the weight iq = 40 K/m} of the ladder itself. Each ladder rail (t5= 4 mm) is supported by a shoe (ts= 5 mm) that is attached to the ladder rail by a bolt of diameter d = 8 mm
A crane boom of mass 450 leg with its center of mass at C is stabilized by two cables AQ and BQ (Ae= 304 mm2 for each cable) as shown in the figure. A load P = 20 KN is supported at point D. The crane boom lies in the y-z plane. (a) Find the tension forces in each cable: TAQand TBQ(kN}. Neglect the mass of the cables, but include the mass of the boom in addition to load P. (b) Find the average stress (s) in each cable.
Solve the preceding problem for a steel pipe column (E = 210 GPa) with length L = 1.2 m, inner diameter d2= 36 mm, and outer diameter d2=40 mm.
A hollow circular tube A fits over the end of a solid circular bar B, as shown in the figure. The far ends of both bars are fixed. Initially, a hole through bar B makes an angle ß with a line through two holes in tube A. Then bar B is twisted until the holes are aligned, and a pin is placed through the holes. When bar B is released and the system returns to equilibrium, what is the total strain energy U of the two bars? (Let lAand lBrepresent the polar moments of inertia of bars A and B, respectively. The length L and shear modulus of elasticity G are the same for both bars.)
Solve the preceding problem if the shaft has an outer diameter d2=150 mm and inner diameter d1= 100 mm. Also, the steel has a shear modulus of elasticity G = 75 GPa, and the applied torque is 16 kN ·m.
Solve the preceding problem for W = 1.0 lb. h = 12 in.,and k =0.511,/in.
Solve the preceding problem for the following data:P = 160 kN,JV = 200 tN,L = 2 m,b = 95 mm, h = 300 mm, and d = 200 mm
Two sections of steel drill pipe, joined by bolted flange plates at Ä are being tested to assess the adequacy of both the pipes. In the test, the pipe structure is fixed at A, a concentrated torque of 500 kN - m is applied at x = 0.5 m, and uniformly distributed torque intensity t1= 250 kN m/m is applied on pipe BC. Both pipes have the same inner diameter = 200 mm. Pipe AB has thickness tAB=15 mm, while pipe BC has thickness TBC= 12 mm. Find the maximum shear stress and maximum twist of the pipe and their locations along the pipe. Assume G = 75 GPa.
The device shown in the figure consists of a prismatic rigid pointer ABC supported by a uniform translational spring of stiffness k = 950 N/m. The spring is positioned a distance P = 165 nun from the pinned end A of the pointer. The device is adjusted so that, when there is no load P, the pointer reads zero on the angular scale. (a) If the load P = 11 N, al what distance .v should the load be placed so that the pointer will read ?? = 2.5° on the scale (see figure part a)? (b) Repeal part (a) if a rotational spring E1= kb-6 is added al A (see figure part b). (c) Lel.x = 7b/8.What is P maxif 0 cannot exceed 2"? Include spring krin your analysis. (d) Now, if the weight of the pointer ABC is known to be W =3N and the weight or the spring is Ws= 2.75 N, what initial angular position (Left in degrees) of the pointer will result in a zero reading on the angular scale once the pointer is released from rest? Assume P = kr=0. (e) If the pointer is rotated lo a vertical position (see figure part c), find the required load P applied at mid-height of the pointer that will result in a pointer reading of 0 = 2.5" on the scale. Consider the weight of the pointer W. in your analysis.