4.Porosity is a measure of the void or empty spaces in a material and is a fraction of thevolume of voids over the total volume. The density of the solid material used to create 11pieces of 0.63 cm diameter and 1.11 cm height cylindrical beads is determined to be 1.71g/ml. These beads were then placed in a flask and was filled to the 49 mL mark with a saltsolution. The total weight measured of the beads and the salt solution was 56.78 g. Uponfurther inspection, it was found that manufacturing defects caused the measured porosityof the beads to be at 29%. Assuming that the solution was able to fully fill the empty spacesinside the beads, calculate the density of the salt solution.Show your solutionsRound your answer to 2 decimal places,5. A chocolate manufacturing plant produces chocolate coated macadamia nuts. Onespecific batch of chocolates weighed an average of 4.55 g for each piece. It was found outthat the macadamia nuts used in the batch had three total defects wherein 31.95 % hadonly three fourths a macadamia nut with a weight of 4.62 g for each piece, 11.43 % hadonly one half of a macadamia nut with a weight of 4.38 g for each piece, and 15.44 % hadonly one fourth of a macadamia nut with a weight of 3.97 g for each piece. Assuming thatthe amount of chocolate coating for each chocolate in the specific batch is constant andeach whole macadamia nut weighs the same, calculate the weight of each piece of chocolatehaving a whole macadamia nut.Show your solutions|Round your answer to 2 decimal places.

Since you have asked multiple questions, we will solve the first question for you. If you want any…

4.Porosity is a measure of the void or empty spaces in a material and is a fraction of the volume of voids over the total volume. The density of the solid material used to create 11 pieces of 0.63 cm diameter and 1.11 cm height cylindrical beads is determined to be 1.71 g/ml. These beads were then placed in a flask and was filled to the 49 mL mark with a salt solution. The total weight measured of the beads and the salt solution was 56.78 g. Upon further inspection, it was found that manufacturing defects caused the measured porosity of the beads to be at 29%. Assuming that the solution was able to fully fill the empty spaces inside the beads, calculate the density of the salt solution. Show your solutions Round your answer to 2 decimal places.

4.Porosity is a measure of the void or empty spaces in a material and is a fraction of the volume of voids over the total volume. The density of the solid material used to create 11 pieces of 0.63 cm diameter and 1.11 cm height cylindrical beads is determined to be 1.71 g/ml. These beads were then placed in a flask and was filled to the 49 mL mark with a salt solution. The total weight measured of the beads and the salt solution was 56.78 g. Upon further inspection, it was found that manufacturing defects caused the measured porosity of the beads to be at 29%. Assuming that the solution was able to fully fill the empty spaces inside the beads, calculate the density of the salt solution. Show your solutions Round your answer to 2 decimal places.

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter4: Types Of Chemical Reactions And Solution Stoichiometry

Section: Chapter Questions

Problem 70E: You are given a 1.50-g mixture of sodium nitrate and sodium chloride. You dissolve this mixture into...

See similar textbooks

Similar questions

Suppose that you are closing a cabin in the north woods for the winter and you do not want the water in the toilet tank to freeze. You know that the temperature might get as low as 30. C, and you want to protect about 4.0 L water in the toilet tank from freezing. Calculate the volume of ethylene glycol (density = 1.113 g/mL; molar mass = 62.1 g/mol) you should add to the 4.0 L water.
You wish to prepare 1 L of a 0.02-M potassium iodate solution. You require that the final concentration be within 1% of 0.02 M and that the concentration must be known accurately to the fourth decimal place. How would you prepare this solution? Specify the glassware you would use, the accuracy needed for the balance, and the ranges of acceptable masses of KIO3 that can be used.
rosity is a measure of the void or empty spaces in a material and is a fraction of the volume of voids over the total volume. The density of the solid material used to create 7 pieces of 0.97 cm diameter and 1.14 cm height cylindrical beads is determined to be 1.63 g/mL. These beads were then placed in a flask and was filled to the 40 mL mark with a salt solution. The total weight measured of the beads and the salt solution was 46.86 g. Upon further inspection, it was found that manufacturing defects caused the measured porosity of the beads to be at 32%. Assuming that the solution was able to fully fill the empty spaces inside the beads, calculate the density of the salt solution. Show your solutions in the next item Round your answer to 2 decimal places. Question Porosity is a measure of the void or empty spaces in a material and is a fraction of the volume of voids over the total volume. The density of the solid material used to create 7 pieces of 0.97 cm diameter…
A 1.6 g sample of a compound is transfered to a 100 mL volumetric flask, filled to the mark with distilled water, and thoroughly mixed. Twenty five milliters of this solution is drawn from the flask using a volumetric pipet, transfered to another 100 mL volumetric flask, and filled to the mark and mixed. The grams of compound in the second volumetric flask is: A. 1.6 B. 1.2 C. 0.80 D. 0.40
Porosity is a measure of the void or empty spaces in a material and is a fraction of the volume of voids over the total volume. The density of the solid material used to create 7 pieces of 0.97 cm diameter and 1.14 cm height cylindrical beads is determined to be 1.63 g/mL. These beads were then placed in a flask and was filled to the 40 mL mark with a salt solution. The total weight measured of the beads and the salt solution was 46.86 g. Upon further inspection, it was found that manufacturing defects caused the measured porosity of the beads to be at 32%. Assuming that the solution was able to fully fill the empty spaces inside the beads, calculate the density of the salt solution. Show your solutions in the next item Round your answer to 2 decimal places.
An aqueous solution of sodium chloride,NaCl , is made by dissolving 1.01 grams of sodium chloride in sufficient water in a 50.0 mL volumetric flask, and then adding enough water to fill the flask to the mark. What is the weight/volume percentage of sodium chloride in the solution? Weight/volume percentage = %
An unknown sample containing a mixture of NaCl and Na2CO3 was analyzed to determine the % composition of each compound. In the analysis for Na2CO3 (soda ash), the following data were obtained mass of unknown - 0.4436 g conc. of HCl used - 0.25 N initial volume - 0.5 mL final volume - 20.0 mL (MW soda ash) 106.12) 1.) What method was used to determine the concentration of HCl? 2.) What is the net volume of HCl used in the titration? 3.) What is % Na2CO3 in the given sample? NOTE: Round off your answer to a whole number (2 sig fig)
You wish to determine the density of two unknown, immiscible liquids, A and B, at room temperature. To do this you must measure the mass of a known volume of each liquid. For liquid A, you decide to use a volumetric pipet to dispense exactly 5.00 mL into a convenient container. Before dispensing the volume of liquid A into the container, you obtain and record the container’s mass as 2.83 grams. After adding the 5.00 mL of liquid A to the container you reweigh the liquid containing container and find the combination to have a mass of 7.71-grams. What is the density of liquid A in g/mL?
8.5 mL of a sample of sea water solution was added to a 44.317 g evaporating dish. The combination weighed 52.987 g. After evaporation the dish and contents weighed 44.599 g. a. What was the mass percent of dissolved solids in the sea water?
1.44 grams of a sample of marble (impure calcium carbonate) dissolved in 40 ml of 1.0 normality (N) of hydrochloric acid, then add an amount of distilled water to the resulting solution, and its volume became 100 ml, it was found that 25 ml of this resulting solution (mixture) needs 19 ml of 0.2 normality (N) NaOH solution. Calculate the normality (mole/L) of the mixture solution and then calculate the percentage of pure calcium carbonate in this sample. If you know that the molecular weight of pure calcium carbonate is 106 g/mol. *