(5) The emissions from a manufacturing process contain gaseous pollutant that cause odors and fumes. The company plans to incinerate the 5,000 acfm exhaust stream. Estimate the volumetric (standard) flowrate of natural gas fuel required to increase the waste gas stream temperature from the initial 80°F to the required temperature of 2500°F. Energy (enthalpy) is transferred from the fuel to the gas. Neglect any possible heat losses in this process. The average net heating value of natural gas is 850 - 1050 Btu/std-ft. Include a diagram of the scenario.

(5) The emissions from a manufacturing process contain gaseous pollutant that cause odors and fumes. The company plans to incinerate the 5,000 acfm exhaust stream. Estimate the volumetric (standard) flowrate of natural gas fuel required to increase the waste gas stream temperature from the initial 80°F to the required temperature of 2500°F. Energy (enthalpy) is transferred from the fuel to the gas. Neglect any possible heat losses in this process. The average net heating value of natural gas is 850 - 1050 Btu/std-ft. Include a diagram of the scenario.

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

A 1.000-g gaseous mixture of CH4 and C2H6 at 1 bar and 298 K is burned in a bomb calorimeter. The calorimeter contains 1.500 kg of water initially at 25.00oC. After equilibrium is reached by the system, the final temperature is 33.00oC. The heat capacity of the calorimeter is 318.0 J/oC. The specific heat capacity of water is 4.186 J/g-oC. Calculate the % volume analysis of the fuel. Please provide COMPLETE solution. it should have final answer. not only formulas Tnx..
Nitrogen is to be liquefied in a simple Linde process. The feed and recycle are mixed. compressed to 64 bar, and precooled to 135K. The vapor then passes through a heat exchanger for additional cooling before beinng throttled to 1 bar. The unliquefied fraction leaves the seperator at the saturation temperature and passes through the heat exchanger, then exits at 120 K. a. What fraction of the gas is liquefied in the process? b. What is the temperature of the high pressure gas entering the throttle valve?
L-lysine is produced by Corynebacterium glutamicum in a bioreactor using glucose as the carbon source and ammonia as the nitrogen source. All streams of this process are aqueous. In the inflow, 8 grams of glucose per 100 grams of flow fluid flowing at a rate of 500 kg / hour is included. The glucose flow rate in the exit steam is 1 kg / hour. The reaction takes place at 25 °c.What is the mole percentage of glucose that was consumed during cell growth inside the bioreactor? -Does the growth of Corynebacterium glutamicum cells inside this bioreactor release or absorbheat? Should heat be supplied to the bioreactor, or removed from, to maintain the operation temperature? I want the solution of both options.
A hydrocarbon stream composed of 40 mol% n-butane and 60 mol% n-octane is fed at 100 kmol/h to a flash vessel operating at 5 bar and 145°C. The liquid outlet stream of the flash vessel is then sent to a distillation column with a partial condenser to further separate the components. 90% of the butane in the feed to the column is recovered in the overhead vapor product (distillate), along with small amounts of octane. The bottoms product contains octane which accounts for 75% of the octane in the fresh hydrocarbon feed (to the flash vessel). The condenser and reboiler operating temperatures are 136.7°C and 165.7°C, respectively. Determine the compositions of the liquid outlet stream of the condenser and the vapor outlet stream of the reboiler.
Liquid nitrogen is stored in 0.5-m3 metal tanks that are thoroughly insulated. Consider the process of filling an evacuated tank, initially at 295 K. It is attached to a line containing liquid nitrogen at its normal boiling point of 77.3 K and at a pressure of several bars. At this condition, its enthalpy is -120.8 kJ kg-1. When a valve in the line is opened, the nitrogen flowing into the tank at first evaporates in the process of cooling the tank. If the tank has a mass of 30 kg and the metal has a specific heat capacity of0.43 kJ kg-1 K-1, what mass of nitrogen must flow into the tank just to cool it to a temperature such that liquid nitrogen begins to accumulate in the tank? Assume that the nitrogen and the tank are always at the same temperature. The properties of saturated nitrogen vapor at several temperatures are given as follows:
Q1) A constant volume tank contain 1 mole ofC7H14and 12 mole of O2 gas at a temperature of 25 °C and 1 bar. The contents of the tank is ignited and C7H14 is burned completely and final products temperature is found to be 1700 K. Determine the heat transfer during this process. ( take daltaHo = -47800 kJ/kg).
Meztiza, a beer cocktail, is prepared by mixing rum, beer, and cola. Compute the finalconcentration(%w/v) of ethanol in meztiza if 100.0 mL of beer was first mixed with 5.0 mL rum andbefore finally diluting it with cola to produce 200.0 mL of the beer cocktail. ( a beer contains about 4.50% (v/v) of ethanolfermented by yeast from sugars while rum contains about 40.0% (v/v) ethanol. Meanwhile, arubbing alcohol is also an alcohol solution which contains 70.0 %(v/v) isopropyl alcohol fermentedby a bacterium instead of a yeast)
The specific heat of compound AB(s) was determined using coffee-cup calorimeter. When 1.750 g of AB(s) was mixed with 15.00 mL deionized distilled water at room temperature, only 0.850 grams of the compound was dissolved. The temperature of the heterogenous mixture was decreased by 1.70K.Prior to this, the calorimeter was calibrated using a 15mL aqueous reaction mixture that initially contains 0.070 moles each of HBr and KOH. The recorded ΔT is +5.75K. Note: H+(aq) + OH -(aq) → H2O(l) ΔH = -55.85 kJ/molAB(s) ⇌ A+(aq) + B-(aq) ΔH = 88.75 kJ/molspecific heat (H2O) = 4.184 J/g°CMM of AB = 65 g/mol What is the specific heat of solid AB compound (in J/g°C)?
A pellet of benzoic acid standard was combusted in a bomb calorimeter to determine the experimental calorimeter constant. After 6 mins of monitoring the temperature, the bomb was fired. The following data were obtained. mole of benzoic acid: 0.0049 mol mass of burnt fuse wire: 0.0125 g qwire,surr: 5858 J/g ΔHcombustion of benzoic acid: -3228.0 kJ/mol Δng (combustion of benzoic acid): -0.5 mol R: 8.314 J/mol•K r1: 0ºC/min r2: 0ºC/min Tf: 30.4ºC Ti: 28.4ºC Determine the calorimeter constant (in J/ºC). Report your answer in 2 decimal places.
A mixture containing 42 wt% benzene (B) and 58 wt% toluene (T) is fed to a distillation column at a flow rate of 100 kg per minute. The product steam leaving the top of the column (the overhead product) contains 90 wt% benzene and 85 wt% of the total benzene fed to the column exits in this overhead product stream. Calculate the mass flow rate and mass composition of the product stream leaving the bottom of the column. Calculate the volumetric flow rate of the overhead product, assuming that it exits the distillation column as a vapour stream at 82C and 1 atm (abs). Physical Property Data (S.G.= specific gravity) from table B-1: Benzene S.G. = 0.879 MW = 78.11 g/mol Toluene S.G. = 0.866 MW = 92.13 g/mol Water Density = 1.00 kg/L MW = 18.02 g/mol R = 0.08206 L atm/mol K
Q1) A constant volume tank contain 1 mole of C,H14 and 12 mole of O2 gas at a temperature of 25 °C and 1 bar. The contents of the tank is ignited and C8H18is burned completely and final products temperature is found to be 1700 K. Determine the heat transfer during this process. ( take AHo = -47800 kJ/kg).
For the equilibrium system: H2O(g) + CO(g) <--> H2(g) + CO2(g). Delta heat of rxn: -42 kJ/mol and Kc=0.62 at 1260 K.0.10 mol each of water, CO, and CO2 (all at 1260 K) are placed in a sealed 1.0-Liter thermally-insulated vessel, which is also at 1260 K. When the system comes to equilibrium, which is true?-The temp & mass of CO would increase.-The temp & mass of CO would decrease.-The temp would remain constant & the mass of CO would increase.-The temp would increase and the mass of CO would decrease.-The temp would decrease and the mass of CO would increase.