5. A beam of uniform cross section and rectangular is 50mm broad,75mm deep and 6m long. It is simply supported at each end and carries a concentrated load of 10kN at midspan (E = 200GN/m²) Neglecting the weight of the beam, calculate the radius of curvature between the supports and the deflection at midspan.

5. A beam of uniform cross section and rectangular is 50mm broad,75mm deep and 6m long. It is simply supported at each end and carries a concentrated load of 10kN at midspan (E = 200GN/m²) Neglecting the weight of the beam, calculate the radius of curvature between the supports and the deflection at midspan.

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter10: Statically Indeterminate Beams

Section: Chapter Questions

Problem 10.3.2P: A fixed-end b earn is subjected to a point load at mid-span. The beam has a rectangular cross...

See similar textbooks

Similar questions

A fixed-end b earn is subjected to a point load at mid-span. The beam has a rectangular cross section (assume that the h/b ratio is 2) and is made of wood (E = 11GPa). Find height h of the cross section if the maximum displacement of the beam is 2 mm. Calculate the displacement of the beam at the inflection points.
The deflection curve for a cantilever beam AB (sec figure) is given by v=q0x2120LEI(10L210L2x+5Lx2x3) Describe the load acting on the beam.
A simple beam with an overhang is subjected to d point load P = 6kN. If the maximum allowable deflect ion at point C is 0.5 mm, select the lightest W360 section from Table F-l{b) that can be used for the beam. Assume that L = 3 m and ignore the distributed weight of the beam.
A propped cantilever steel beam is constructed from a W12 × 35 section. The beam is loaded by its self-weight with intensity q. The length of the beam is 1L5 ft. Let E = 30,000 ksi. Calculate the reactions at joints A and B. Find the location of zero moment within span AB. Calculate the maximum deflection of the beam and the rotation at joint B.
-3 The deflection curve for a simple beam AB (see figure) is given by v=q0x360LEI(7L410L2x2+3x4) Describe the load acting on the beam.
Obtain a formula for the ratio c/maxof the deflection at the midpoint to the maximum deflection for a simple beam supporting a concentrated load P (see figure). From the formula, plot a graph of c/max versus the ratio a/L that defines the position of the load (0.5 < a/L < ) What conclusion do you draw from the graph? (Use the formulas of Example 9-3.)
A wooden beam 5 m long, simply supported at its ends and it is carrying a point load of 8 kN at its centre. The cross-section of the beam is 160 mm wide and 270 mm deep. If E for the beam is 70x109 N/m2, the deflection at the centre is
A cantiliver of length 20 m is subjected to a point load of 35 kN and a moment of 40 kN m at its free end. The cross section of the beam is squar and its sides are 2 m and young's modulus is 280 GPa. Calculate the deflection of the beam.
A cantilever of length 2.5 m carries a uniformly distributed load of 16.4 kN per metre length over the entire length. If the moment of intertia of the beam = 7.95 x107 mm4 and value of E = 2 x 105 N/mm2 , Estimate the deflection at the free end.
A cantilever 8m long carries a uniformly distributed load of 12kN/m from midspan to free end. Determine the deflection at the free end, Find the smallest moment of inertia (in x10^6 mm^4) so that its maximum deflection does not exceed the limit of 1/360 of the span. Use E = 70 GPa. Determine the required depth of beam if it is a rectangular section with width-to-depth ratio of 0.5.
Compute the slope and deflection of the simply supported beam shown in figure Q2a. Assume value of E = 29 × 106 psi and I = 22.4 in4.
A SSB of 8 m span carries a point load of 10 kN at its centre. It also subjects to a UDL of 1kN/m over its entire span. Find the maximum deflection of the beam. Take E = 200 kN/mm2,I = 200 x 106mm4.