78 A steam power plant operates on regenerative steam cycle as shown in figure.1 kgPump(8)1 kg(1)Turbine(2)+m₁Firstfeed waterheater(3)(6)m₂Secondfeed waterheater-(4)Condenser+(5)Given :h₂ = 2679 kJ/kg, h3 = 2365 kJ/kg, h = 137.8 kJ/kg, h = 467.1 kJ/kg and h = 762.6 kJ.kgTotal mass of steam (m, + m₂) extracted from the two points of the turbine iskg.[Correct upto 2 decimal places]

Answered: Image /qna-images/answer/691135dc-e509-4273-8d3c-a3ffb0b9ced1.jpg

78 A steam power plant operates on regenerative steam cycle as shown in figure. 1 kg Pump (8) 1 kg Turbine (2)+ m₁ First feed water heater (3) (6) m₂ Second feed water heater Condenser (5) Given : h₂ = 2679 kJ/kg, 1₂ = 2365 kJ/kg, h= 137.8 kJ/kg, h = 467.1 kJ/kg and h = 762.6 kJ.kg Total mass of steam (m, + m₂) extracted from the two points of the turbine is [Correct upto 2 decimal places] k:

78 A steam power plant operates on regenerative steam cycle as shown in figure. 1 kg Pump (8) 1 kg Turbine (2)+ m₁ First feed water heater (3) (6) m₂ Second feed water heater Condenser (5) Given : h₂ = 2679 kJ/kg, 1₂ = 2365 kJ/kg, h= 137.8 kJ/kg, h = 467.1 kJ/kg and h = 762.6 kJ.kg Total mass of steam (m, + m₂) extracted from the two points of the turbine is [Correct upto 2 decimal places] k:

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The turbine of a steam power plant operating on a simple ideal Rankine cycle produces 500 kW of power when the boiler is operated at 3.5 MPa, the condenser at 40 kPa, and the temperature at the turbine entrance is 650oC. Determine: (a)the rate of heat supply in the boiler, (b)the rate of heat rejection in the condenser, and (c)the thermal efficiency of the cycle. Answers: (a) 1458 kW, (b) 958 kW, (c) 0.343
A 1000-MW supercritical double-reheat steam power plant operates withthe main (live) steam condition of 250 bars and 560°C and the condenserpressure of 0.04 bar. The steam is reheated first at 30 bars to 560°C andthen at 4 bars to 560°C. The turbine efficiency is 0.92. The feed pumpwork may be ignored. Calculate: (a) the plant net specific work, (b) the plant thermal efficiency, (c) the plant steam mass flow rate, and (d) the plant heat rate.
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.22 MPa and 27 C at a rate of 0.07 kg/s, and it leaves at 1.2 MPa and 73°C. The refrigerant is cooled in the condenser to 44°C and 1.16 MPa, and t is throttied to 0.21 MPa. Disregarding any heat transfer and pressure drops in the connecting lines between the components, show the cycle on a T-s diagram with respect to saturation lines, and determine (a) the rate of heat removal from the refrigerated space and the power input to the compressor, (b) the isentropic efficiency of the compressor, and (c) the COP of the refrigerator.
A. Calculate the thermal efficiency of a Rankine cycle in which the steam is initially dry saturated at 2 Mpa and the condenser pressure 7kN/m2 . Express this efficiency as a percentage of a Carnot cycle efficiency of the same limits of temperature. B. If the steam leaves the boiler at 3500C with the same pressure of the boiler and condenser given above. Explain why the Rankine efficiency in (A) is less than in (B), and why the ratio of efficiencies of the respective Rankine and Carnot is grater. Ans [ 88.3%, 49.9%]
In a Reheat Cycle steam enters the turbine @ 40 bar and 400 C. It expands isentropic ally to 6 bar and is reheated at constant pressure to 400 C. This steam expanded isentropic ally to 1 bar and is reheated at constant pressure to 200 C. Finally this steam is expanded isentropic ally in the condenser pressure of 0.1 bar. Determine the thermal efficiency and the capacity of the boiler if 10,000 KW of power output is required.
A turbine with one extraction for regenerative feed water heating receives steam withan enthalpy of 3373 kJ/kg and discharges it with an exhaust enthalpy of 2326 kJ/kg.The ideal regenerative feedwaterheater receives 11,338 kg/h of extracted steam at345kPa (whose h=2745kJ/kg). The feedwater (condensate from the condenser)enters the heater with an enthalpy of 140kJ/kg and departs saturated at 345kPa(hf=582kJ/kg). Calculate the turbine output in kW.
A. Calculate the thermal efficiency of a Rankine cycle in which the steam is initially dry saturated at 2 Mpa and the condenser pressure 7kN/m². Express this efficiency as a percentage of a Carnot cycle efficiency of the same limits of temperature. B. If the steam leaves the boiler at 350°C with the same pressure of the boiler and condenser given above. Explain why the Rankine efficiency in (A) is less than in (B), and why the ratio of efficiencies of the respective Rankine and Carnot is grater.
The pressure in the boiler of a steam power plant operating on the ideal Rankine cycle is 1250 psia. The condenser pressue is 2 psia. The mass flow rate of steam through the system is 75 lbm/s and the quality of the steam at the turbine exit is 0.9. Show the cycle on a T-s diagram, and determine (a) the turbine inlet temperature, (b) the rate of heat input in the boiler, and (c) the thermal efficiency of the cycle.
The mass flow rate of steam is 5 kg/s for a Rankine Cycle. For the actual cycle, the turbine efficiency is 86%, turbine brake efficiency is 80%, and generator efficiency=90%. The inlet conditions of the turbine are 3MPa and 400⁰C while the condensing pressure is 50kPa. a. Sketch the P-v, T-s and h-s diagram of the Cycle b. Calculate for the ideal and actual steam rates and heat rates of the Rankine Cycle and Rankine Engine, respectively. c. Determine the energy chargeable and combine thermal efficiencies for the Rankine Cycle and Rankine engine, respectively
Consider a steam power plant that operates on the ideal reheat Rankine cycle. The plant maintains the boiler at 5000 kPa, the reheat section at 1200 kPa, and the condenser at 20 kPa. The mixture quality at the exit of both turbines is 96 percent. Determine the temperature at the inlet of each turbine and the cycle's thermal efficiency. Answers: 327°C, 481°C, 35.0 percent.
A basic Rankine steam power plant uses an adiabatic turbine that operates with inlet steam at 6.80 MPa and 550.0 ∘C.The exhaust steam enters the condenser at 50.0 ∘C with a quality of 0.960. Saturated liquid water leaves the isobaric condenser and is pumped to the boiler. Mass flow through the cycle is 2.900 kg/s. Neglecting pump work and kinetic and potential energy changes, determine: the work interaction term of the turbine: the thermal efficiency of the cycle, ?th:
A basic Rankine steam power plant uses an adiabatic turbine that operates with inlet steam at 6.80 MPa and 550.0 ∘C. The exhaust steam enters the condenser at 50.0 ∘C with a quality of 0.960. Saturated liquid water leaves the isobaric condenser and is pumped to the boiler. Mass flow through the cycle is 2.900 kg/s. Neglecting pump work and kinetic and potential energy changes, determine: the work interaction term of the turbine: the thermal efficiency of the cycle, ?th: the second law efficiency of the turbine, ?2nd: