B) A closed cylindrical tank filled with water has a hemispherical dome and is connected to an inverted piping system as shown in Fig.(2). The liquid in the top part of the piping system has a relative density of 0.8, and the remaining parts of the system are filled with water. If the pressure gage reading at A is 60 kPa, determine: (a) the pressure in pipe B, and (b) the pressure head, in millimeters of mercury, at the top of the dome 1point C2.

B) A closed cylindrical tank filled with water has a hemispherical dome and is connected to an inverted piping system as shown in Fig.(2). The liquid in the top part of the piping system has a relative density of 0.8, and the remaining parts of the system are filled with water. If the pressure gage reading at A is 60 kPa, determine: (a) the pressure in pipe B, and (b) the pressure head, in millimeters of mercury, at the top of the dome 1point C2.

Name: B) A closed cylindrical tank filled with water has a hemispherical do
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: B) A closed cylindrical tank filled with water has a hemispherical dome and is connected to an inverted pipingsystem as shown in Fig.(2). The liquid in the top part of the piping system has a relative density of 0.8, and theremaining parts of the sy

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck decelrates at 4 m/s^2. ( WITH FREE BODY DIAGRAM)
A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck accelerates at 3 m/s^2. (With Free Body Diagram)
A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck accelerates at 3 m/s^2.
A water pipe is connected to a double-U manometer as shown in Figure below at a location where the local atmospheric pressure is 97.9 KPa. Determine the absolute pressure at the center of the pipe.
The water tanks are connected to each other through a mercury manometer with inclined tubes as shown in the figure. If the pressure difference between the two tanks is 20 kPa, calculate a and θ.
A water pipe is connected to a double-U manometer as shown in figure below at a location where the local atmospheric pressure is 12.6 psia. Determine the absolute pressure at the center of the pipe.
Pressure in a water container can be measured by an open vertical tube. If the expected water rise is about 20cm. What tube diameter is needed to ensure the capillary action is less than 3%?
A water storage tank contains water whose level is 18 meters above the bottom of the tank. A flexible rubber pipe is connected to the bottom of the tank, and the outlet tip of the rubber pipe is pointed in a vertical upward position. The water storage tank is sealed to maintain the air pressure gage inside the tank at 206 kiloPascal. The maximum height in meters to which the water stream could rise vertically is-------- meters.
A water pipe is connected to a double-U manometer at a location where the local atmospheric pressure is 14.5 psia. Determine the absolute pressure at the center of the pipe.
Consider a glass of water. Compare the water pressures at the bottom surface for the following cases: the glass is (a) stationary, (b) moving up at constant velocity, (c) moving down at constant velocity, and (d) moving horizontally at constant velocity.
The U-tube in Fig has a 1-cm ID and contains mercuryas shown. If 20 cm 3 of water is poured into the righthandleg, what will the free-surface height in each leg beafter the sloshing has died down?
A U-tube containing mercury (sg = 13.6) has itsright-hand limb open to the atmosphere and the left-handlimb connected to a pipe conveying water under pressure,the difference in the level of mercury in the two limbs being200 mm. If the mercury level in the left-hand limb is 400 mmbelow the pipe's center line, find the pipeline's absolutepressure (kPa). Also, find the new difference in levels ofmercury in the U-tube if the pressure in the pipe falls by 2kPa.