9. A mixture of ideal gases consists of 4 kg of nitrogen and 6 kg of carbon dioxide at a pressure of 4 bars and a temperature of 20°C. Find : i. ii. The equivalent molecular weight of the mixture, The equivalent gas constant of the mixture, The partial pressures and partial volumes, The volume and density of the mixture, and vi. The cp and cv of the mixture. If the mixture is heated at constant volume to 50°C, Find the changes in internal energy, enthalpy and entropy of the mixture if the heating is done at constant pressure. Take K : for CO2 1.286 and for N2 = 1.4. 111. iv. The mole fraction of each constituent, V.

9. A mixture of ideal gases consists of 4 kg of nitrogen and 6 kg of carbon dioxide at a pressure of 4 bars and a temperature of 20°C. Find : i. ii. The equivalent molecular weight of the mixture, The equivalent gas constant of the mixture, The partial pressures and partial volumes, The volume and density of the mixture, and vi. The cp and cv of the mixture. If the mixture is heated at constant volume to 50°C, Find the changes in internal energy, enthalpy and entropy of the mixture if the heating is done at constant pressure. Take K : for CO2 1.286 and for N2 = 1.4. 111. iv. The mole fraction of each constituent, V.

Chemistry

10th Edition

ISBN:9781305957404

Author:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Publisher:Steven S. Zumdahl, Susan A. Zumdahl, Donald J. DeCoste

Chapter1: Chemical Foundations

Section: Chapter Questions

Problem 1RQ: Define and explain the differences between the following terms. a. law and theory b. theory and...

See similar textbooks

Similar questions

A 20-cu ft tank at 100 degrees F is pressured to 200 psia with a pure paraffin gas. Ten pounds of ethane are added, and the specific gravity of the gas mixture is measured to be 1.68. Assume that the gases act as ideal gases. What was the gas originally in the tank?
If 15.1 g of the mixture with a volumetric composition of 45% N2, 35% O2 and 20% X gas is applying 3 atm pressure to a 5 dm3 volume vessel at 25 ° C, in which option is the molecular weight of X gas given correctly? (MN2: 28 gmol-1, MO2: 32 gmol-1)
A flue gas contains 5 mole% H 2O. Calculate the ratios(a) kmol flue gas/kmol H 2O.(b) kmol dry flue gas/kmol flue gas.(c) kmol H 2 O/kmol dry flue gas.
A natural gas has the following composition by volume: 94.1% CH4, 3% C2H6 and 2.9% N2. This gas is piped from the well at a temperature of 27°C and an absolute pressure of 345 kPa. It may be assumed that the ideal gas law is applicable. Calculate: a. Partial pressure of N2 b. Pure component volume of N2 per 100 m3 of the gas c. Density of the mixture in kg/m3 at the existing conditions
Show complete solutions and enclose all final answers in a box. Round off final answers to 4 decimal places and use floating values for intermediate answers. A gas column is separated into two segments by a non-permeable partition. On the first segment is 1.63 moles of Helium with volume V1 and on the second segment is 3.84 moles of Oxygen gas with volume V2. Consider both gases to be ideal and at the same pressure P and temperature T. If the partition is removed, calculate the change in entropy of the gaseous system.
Calculate the partial pressure (Pa) of CO2 in a mixture that contains 45% wt CO2, 35% wt CO and 20% wt O2 at 100 deg C and 1.5 atm.
a cylinder was connected to an open ended U-tube (1 atm) containing some mercury, Hg (density=13.6gcm^-3), and the Hg was displaced 100mm towards the container. What is the pressure of the gas inside the container?
A gas mixture contains .923 g Ar and 1.25 g Br2 in a 4.0L vessel at 32C. Calculate the mole fraction, X, and partial pressure of each component in the mixture.
Treat CO2 as an ideal gas and compute q, w, DH, and DU for its inhalation at a constant 1 bar pressure. The temperature outside the body is 15 °C and body temperature is 37 °C. Assume that the volume of air after inhalation (in the lungs) is 500 cm3 and that the concentration of CO2 in the atmosphere is 383 ppm (parts per million).
The gas A(g) (1 mole) undergoes a two-step process one after another as described below :i) The gas is expanded at 25°C and from 1 bar pressure against a constant pressure of 0.2 bar and the final volume of the gas is the twice the initial volume.ii) The gas is cooled down to -25°C at constant volume.Cv,m = 3/2 RCalculate ΔU, ΔH, q and w for the each step and for the entire process
Producer gas is a fuel that is manufactured from the reaction of coal, steam and air. A producer gas has the following composition by volume (dry basis): 20.35% CO, 11.03%, CO2, 15% H2, 51.43% N2, 1.98%O2 and 0.21 % CH4. The gas is flowing at 6000 cfm. It has a temperature of 200℃ , a pressure of 21 cm Hg and a partial pressure of 50 mm Hg for H2O. The atmospheric pressure is 758 mm Hg. The gas is delivered from the source to the furnace by means of a pipe. It cools down to 50 ℃ and is compressed to 2 atm pressure. At this condition, calculate:1. the volumetric flow ate2. the mass flow rate3. the partial pressure of each component/including water)4. complete analysis of the mixture
100.0 g of propyne (C3H4) (g) is burnt in a 30.0 L rigid vessel containing pure O2 (g) at P = 10.00 bar and an initial temperature of 25.0 °C. At the end of the reaction the temperature of the vessel is 250. °C. At the end of the reaction, what are the partial pressures (in bar) of CO2 (g) and O2 (g)?