Answered: A 125 long bar with a cross section of…

A 125 long bar with a cross section of 12.7 mm by 3.2 mm is exposed to a 1560 N tensile load. Calculate the stress and elongation of the ABS bar (secant modulus Esecant= 2270 MPa).

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter2: Axially Loaded Members

Section: Chapter Questions

Problem 2.6.10P: A prismatic bar with a length L = 1 m and cross-sectional area A = 1200 mm2 is supported at the...

See similar textbooks

Related questions

Q: A rod made of aluminum alloy, with a length of 150 mm, diameter of 15 mm, and yield strength of 160…

Q: 8. A steel bar of 40mm x 40mm square cross-section is subjected to an axial compressive load of…

A: Answer: The elongation of the bar will be ◆ When 30mm × 30mm square section : 2.22 mm. ◆ When 40mm…

Q: A cylindrical rod of steel (E = 207 GPa) having a yield strength of 310 MPa is to be subjected to a…

A: E = 207 GPa Yield strength = 310 MPa Load = 10000 N Original length = 500 mm Elongation = 0.35 mm

Q: A cylindrical rod of copper (E = 110 GPa, 16 ´106 psi) having a yield strength of 240 MPa (35,000…

Q: A steel bar 100 mm long and having a square cross section 20 mm on an edge is pulled in tension with…

A: Given data: The length of the bar, L = 100 mm. The side of square, a = 20 mm. The applied load, P =…

Q: A wire 20 m long, weighing 0.8N per m, and having a cross sectional area of 6.2 mm2, is suspended…

Q: A load is applied to a rigid bar that is symmetrically supported by three steel rods, as shown. The…

A: here the cross- section of the rod is A A= 1.2 in2 stress = 22000 psi

Q: A bar is applied a tensile load of 50 kN having diameter 10 mm, Calculate the tensile stress induc

A: Given:force, F=50 kNdiameter, d=10 mm

Q: 9-b) A circular bar is 0.200 m long and 25 mm diameter. It carries a load of 50 KN. Given that…

Q: c) A hollow connecting rod has an inner diameter of 26.25 mm and is subjected to an axial tensile…

Q: For the structure below, calculate the diameter of the pin G, considering that its allowable stress…

Q: Q3\ A) A 10-mm-diameter bar of 1040 carbon steel is subjected to a tensile load of 50,000 N, taking…

Q: At temperature of 25oC, a 17 m rod 8 mm in diameter is subjected to a tensile load of 24 kN. At what…

Q: A composite rod is comprised of an EN8 steel shaft of length, diameter and Young's modulus of 200…

A: NOTE:- As per our company guidelines we are supposed to answer only first 3 sub-parts. Kindly repost…

Q: A bar having a circular cross section is carrying a tensile load of 30 kN. If the diameter and…

Q: 4) A small, uniaxial stress of 1 MPa (145 psi) is applied to a rod of high density polyethylene. a)…

A: Given: Uniaxial stress is 1Mpa.

Q: A bar having a circular cross section is carrying a tensile load of 30 kN. If the diameter and…

A: Given data: P=30 kNd=6 mmL=80 cmE=207 GPa Need to determine the deflection in the bar.

Q: A metallic bar of 1 cm diameter, when tested under an axial pull of 10 kN, was found to reduce its…

A: ...

Q: Click to see additional instructions Calculate the minimum Safety Factor if the radius r= 5mm and M=…

Q: A bar subjected to a stress of 1 GPa develops an elongation of 5mm. If the initial length of the bar…

Q: load of 200 KN. If the length of the bar is 2 m and E = 200 GPa. What will be the elongation of the…

Q: A cast iron rod of diameter 18 mm and length of 240 mm is subjected to a tensile load of 100 kN, and…

A: As per the given data in question, the correct option is not available in options. Please find the…

Q: A cylindrical specimen of a nickel alloy having an elastic modulus of 207 GPa and an original…

Q: Please answer both 1 and 2 as they relate to eachother. thank you in advance

A: Write the properties of 1040 steel.

Q: A bar is subjected to fluctuating tensile load from 20 kN to 100 kN .The material has yield strength…

Q: A composite rod is comprised of an EN8 steel shaft of length, diameter and Young’s modulus of 200…

A: The schematic diagram of the given composite rod:- Given data, Length of steel rod, L1 = 0.2 m…

Q: [80 MN/m²; 0.12 mm] 1.2 A steel tube, 25 mm outside diameter and 12 mm inside diameter, carries an…

A: We have to find stress of steel tube amd load

Q: A composite section 2 m in length, consisting of a steel tube with outer diameter 24 mm and…

A: Given data: Calculate the inner diameter of the steel tube.

Q: An alloy bar 800 mm long and 200 mm in cross-section is held between two rigid plates and is…

A: Given:- Axial load=200kn Cross-sectional area:-200mm2 To find:- Reaction forces at end and…

Q: 2. A steel bar that is 5.75 m long must support a tensile load of P = 20 kN without stretching more…

Q: A composite bar is subjected to a tensile load of 115 kN. Bar 1 is rectangular cross section with…

Q: A steel rod of length 10 m is subjected to a axial load of 10 kN. Calculate the elongation of the…

A: Given data Length of steel rod (L) = 10 m Axial load (P) = 10 kN diameter (d) = 40 mm E = 200 GPa…

Q: A cylindrical metal rod of 20mm diameter and 1m length is subjected to a tensile load of 60KN. To…

Q: 1 Point A mild steel tie bar is to withstand a maximum tensile force of 100 kN. The ultimate tensile…

A: We have to determine diameter of bar

Q: A rod is subjected to a uniaxial load within linear elastic limit. When the change in the stress is…

A: Given data: The change in stress, σ=200 MPa. The change in strain, ε=0.001. The Poisson's ratio,…

Q: What is the tensile strength of the bar if the yield stress is equal to 275MPa?

Q: A column is made from a rectangular bar whose cross section is 5.1 cm by 8.7 cm. If the height of…

Q: At the proportional limit, a 16 mm thick x 69 mm wide bar elongates 6.2 mm under an axial load of…

Q: A steel rod with length equal to 12 ft, has a diameter of 0.8 inches in quarter of its length and a…

Q: A copper rod of 50mm diameter is surrounded by a steel tube of 100mm external diameter, the ends…

A: Given data diameter of copper rod (d) = 50 mm outer diameter of steel tube (D) = 100 mm…

Q: A steel bar with cross section of 100mm x 20mm is 450mm in length. The bar is subjected to an axial…

Q: Problem 1: A steel rod with a cross-sectional area of 0.20 in² is stretched between two fixed…

A: Given data: The cross-section area is The 1st temperature is The tensile load is The 2nd…

Q: Hooke's Law Part B - Calculate the elongation under load A bar with a solid square cross-section is…

A: Find the total elongation of bar and permanent change in length of bar.

Q: A steel wire 60cm long and 0.32 cm in -9 radius is attached to the pulley in 5.5cm radius , 3kg…

A: Given: The length of wire, L = 60 cm The radius of of wire, r = 0.32 cm The radius of pulley, R =…

Q: A new high stiffness plastic material has a length of 19.7 inches and a thickness of 3 mm and is…

A: Given data:- Force F=10000N L=19.7 in, converting into mm we get L=500.38 mm Lfinal=19.88 in,…

Q: The assembly consists of two 10-mm diameter red brass C83400 copper rods AB and CD, a 15-mm diameter…

A: Given data: The diameter of brass rod, dB=10 mm. The diameter of the steel rod, ds=15 mm. The…

Q: 9- Compute the total elongation caused by an axial load of 100 kN applied to a flat bar 20 mm thick…

A: Find the total elongation caused by an axial load 100 KN applied to a flat bar 20 mm thick ,…

Q: 2) A bar of length 5 m is subjected to an axial tensile load of 100 KN. The bar is 25 mm diameter…

A: According to the given information we have a bar of 5 m to an axial load of 100 Kn the bar is 25 mm…

Concept explainers

Conduction and Convection

When energy travels from one object to another it is said to have undergone heat transfer. Heat transfer is nothing but the transfer of thermal energy or internal energy from one thing to another, like e.g., when a vessel with water, kept on top of a burner, heats up because of the flame underneath it.

Question

A 125 long bar with a cross section of 12.7
mm by 3.2 mm is exposed to a 1560 N
tensile load. Calculate the stress and
elongation of the ABS bar (secant modulus
Esecant= 2270 MPa).

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Step by step

Solved in 3 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A round bar of 10 mm diameter is made of aluminum alloy 7075-T6 (see figure). When the bar is stretched by axial forces P, its diameter decreases by 0.0 16 mm. Find the magnitude of the load P. Obtain the material properties from Appendix 1.
A high-strength steel bar used in a large crane has a diameter d = 2.00 in. (sec figure). The steel has a modulus of elasticity E = 29 × 10 psi and Poisson’s ratio is v = 0.29. Because of clearance requirements, the diameter of the bar is limited to 2.001 in. when it is compressed by axial forces. What is the largest compressive load Pmaxthat is permitted?
A prismatic bar of length L = 1.8 m and cross-sectional area A = 480 mm" is loaded by forces P{= 30 kN and A = 60 kN (see figure) The bar is constructed of magnesium alloy having a stress-strain curve described by the Ram berg-Osgood equation: 45.000 618 UW id which u has units of mega pascals (MPa). (a) Calculate the displacement 8t- of the end of the bar when the load P:acts alone. (b) Calculate the displacement when the load P, acts alone. (c) Calculate the displacement when both loads act simultaneously.
Rigid bar ACB is supported by an elastic circular strut DC having an outer diameter of 15 in. and inner diameter of 14.4 in. The strut is made of steel with a modulus elasticity of E = 29,000 ksi. Point load P = 5 kips is applied at B. Calculate the change in length of the circular strut DC. What is the vertical displacement of the rigid bar at point B?
A steel pad supporting heavy machinery rests on Four short, hollow, cast iron piers (see figure). The ultimate strength of the cast iron in compression in 50 ksi. The outer diameter of the piers is d = 4.5 in, and the wall thickness is t = 0.40 in. Using a factor of safety of 3.5 with respect to the ultimate strength, determine the total load P that can be supported by the pad.
A pinned-end strut of aluminum (E = 10,400 ksi) with a length L = 6 ft is constructed of circular tubing with an outside diameter d = 1 in. (sec figure). The strut must resist an axial load F = 4 kips with a factor of safety n = 2.0 with respect to the critical load. Determine the required thickness t of the tube.
An aluminum bar has length L = 6 ft and diameter d = 1.375 in. The stress-strain curse for the aluminum is shown in Fig. 1.34. The initial straight, line part of the curve has a slope (modulus of elasticity) of 10.6 × 106 psi. The bar is loaded by tensile forces P = 44.6 k and then unloaded. (a) That is the permanent set of the bar? (b) If the bar is reloaded. what is the proportional limit? hint: Use the concepts illustrated in Figs. l.39b and 1.40.
A prismatic bar with a length L = 1 m and cross-sectional area A = 1200 mm2 is supported at the ends. The bar is then subjected to a temperature increase ?T = 25°C. Calculate the complete stale of stress acting on an inclined section .rs that is cut through the bar at an angle ?? = 45*. Use E = 200 GPa and the coefficient of thermal expansion a = 12×10-6/?.
A two-story building has steel columns AB in the first floor and BC in the second floor, as shown in the figure. The roof load P:equals 400 KN, and the second-floor load P-, equals 720 kN. Each column has a length L = 3.75 m. The cross-sectional areas of the first- and second-floor columns are 11,000 mm" and 3900 mm", respectively. (a) Assuming that E = 206 GPa. determine the total shortenings aof the two columns due to the combined action of the loads Ptand P,. (b) How much additional load P0can be placed at t he top of t he column (point C) if t he total shortening: SACis not to exceed 4.0 mm?
A symmetrical framework consisting of three pin-connected bars is loaded by a force P (see figure). The angle between the inclined bars and the horizontal is a = 52°. The axial strain in the middle bar is measured as 0.036. Determine the tensile stress in the outer bars if they are constructed of a copper alloy having the following stress-strain relationship:
A steel pad supporting heavy machinery rests on four short, hollow, cast iron piers (see figure). The ultimate strength of the cast iron in compression is 400 MPa. The total load P that may be supported by the pad is 900 kN. Using a factor or safely 3.0 with respect to ultimate strength, determine the outer diameter of the pier if the thickness, is of the cross section is 12 mm.
To support a tensile load of 65 kN, a metallic rod with a circular cross section and a length of 0.32 m will be used. It is required that the tension in the bar does not exceed 240 MPa and the maximum elongation is 0.42 mm. What is the minimum rod diameter [m] in these conditions? (Elasticity for metallic bar take the module as 220 GPa).