A 20 cm long ram has its entire length engaged in a cylinder. The diameter of theram is 10 cm and the gap between the ram and the cylinder is 1mm which is filled withSAE 30 oil at 40°C. The ram travels at 5. Find the frictional resistance(force) of thesurfaces.2.0Glycerine1.08Castor oil6.SAE 30 oil21x 10-14SAE 10W-30 oil2SAE 10W oil1 x 10 2Mercury4Kerosene2Carbon tetrachlorideIx 10-3WaterOctaneHeptane1x 10-6HeliumCarbon dioxideMethaneAir1x 10-5Hydrogen20406080100120Temperature (°C)Viscosity u (N s/m³)

Write the given values along with the suitable variables.

A 20 cm long ram has its entire length engaged in a cylinder. The diameter of the ram is 10 cm and the gap between the ram and the cylinder is 1mm which is filled with SAE 30 oil at 40°C. The ram travels at 5. Find the frictional resistance(force) of the surfaces.

A 20 cm long ram has its entire length engaged in a cylinder. The diameter of the ram is 10 cm and the gap between the ram and the cylinder is 1mm which is filled with SAE 30 oil at 40°C. The ram travels at 5. Find the frictional resistance(force) of the surfaces.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Dynamics of Rigid Bodies A cylindrical well is 2m in diameter and 12 m deep. If there is 3m of water in the bottom of the well, determine the work done in pumping all this water to the surface. (Answer: 970kN m) Refer to the above problem, what wokr must be done by a pump that is 60 percent efficient? (Answer: 1620 kN m) Need solution pls
Water is flowing in a 90ο pipe with uniform cross section area of A=0.0083 m2. The velocity along the horizontal direction is v1=6.0 m/s. The pressure at the section 1 is p1=500kPa. Elevation difference and energy losses can be neglected. The density of water is ρ=1000kg/m3. An external force is needed to hold the pipe in equilibrium. (1) Select the correct expression of the external force component in the horizontal direction Rx_________ A. B. C. D.
A 1.2 mm diameter tube is inserted into an unknown liquid whose density is 960 kg/m^3, and it is observed that the liquid rises 5 mm in the tube, making a contact angle of 15 degree. Determine the surface tension of the liquid. h = 5mm = 0.005m d = 12x10^-4m r = 6x10^-4m angle = 15 y = 960kg/m^3 = 9.414 kn/m^3
Water is flowing in a 90ο pipe with uniform cross section area of A=0.0083 m2. The velocity along the horizontal direction is v1=6.0 m/s. The pressure at the section 1 is p1=500kPa. Elevation difference and energy losses can be neglected. The density of water is ρ=1000kg/m3. An external force is needed to hold the pipe in equilibrium. (2) Select the correct expression of the external force component in the vertical direction Ry_________ A. B. C. D.
The distance between the centers of the two arms of a U-tube open to the atmosphere is 30 cm, and the U-tube contains 20 cm high alcohol in both arms. Now the U-tube is rotated about the left arm at 4.2 rad/s. Determine the elevation difference between the fluid surfaces in the tow arms.CHOICES a.0.81 m b.0.96 m c.0.33 m d.0.67 m
A 0.6-mm-diameter glass tube is inserted into water at 20°C in a cup. The surface tension of water at 20°C is ?s = 0.073 N/m. The contact angle can be taken as zero degrees. The capillary rise of water in the tube is (a) 2.6 cm (b) 7.1 cm (c) 5.0 cm (d ) 9.7 cm (e) 12.0 cm
Consider a cubical water tank with a side length of 3 m. The tank is half filled with water, and is open to the atmosphere. Now, a truck carrying this tank is accelerated at a rate of 5 m/s2. The maximum vertical rise of free surface of the water is (a) 1.5 m (b) 1.03 m (c) 1.34 m (d) 0.681 m (e) 0.765 m
The distance between the centers of the two arms of a U-tube open to the atmosphere is 30 cm, and the U-tube contains 20 cm high alcohol in both arms. Now the U-tube is rotated about the left arm at 4.2 rad/s. Determine the elevation difference between the fluid surfaces in the tow arms. Include the free body diagram in your solution. a.0.96 m b.0.67 m c.0.33 m d.0.81 m
Q2/ How much fluid is required to raise the pressure in a thin cylinder of length 3 m, internal diameter 0.7 m, and wall thickness 12mm by 70kN/m*? E = 210GN/m* and v = 0.3 for the material of the cylinder and K = 2.1 GN/m* for the fluid.
Water from a reservoir is raised in a vertical tube of internal diameter D = 30 cm under the influence of the pulling force F of a piston. Determine the force needed to raise the water to a height of h = 1.5 m above the free surface. What would your response be for h = 3 m? Also, taking the atmospheric pressure to be 96 kPa, plot the absolute water pressure at the piston face as h varies from 0 to 3 m.
6. Hot water flows through a horizontal steelpipe with diameter (0.25 m) the watervelocity is 5 m/s. The properties of water arep=300 kg/m3 p=3x10-2 kg/m: s. TheReynolds number isO 12000O 12500O 11500O 13500
Flood in irrigation areasto block and return the water to the river or wateras below to guide your bedThe flat cover system provided is preferred. Of coverits weight is 871 kg. Square section cover, coverhinged 1 m above center (a = 0.25 m)and b = 150 cm. Cover vertically 4 °has angle. According to the givenWhat is the maximum water head (h) for not openingshould be up. (ρ water = 1000 kg / m3)