A 3-phase, 50-Hz induction motor with its rotor star-connected gives 500 V (r.m.s.) at standstill between the slip-rings on open-circuit. Calculate the current and power factor at standstill when the rotor winding is joined to a star-connected external circuit, each phase of which has a resistance of 10 Q and an inductance of 0.04 H. The resistance per phase of the rotor winding is 0.2 N and its inductance is 0.04 H. 4. Also, calculate the current and power factor when the slip-rings are short-circuited and the motor is running with a slip of 5 per cent. Assume the flux to remain constant. Identify it`s given and solve it

A 3-phase, 50-Hz induction motor with its rotor star-connected gives 500 V (r.m.s.) at standstill between the slip-rings on open-circuit. Calculate the current and power factor at standstill when the rotor winding is joined to a star-connected external circuit, each phase of which has a resistance of 10 Q and an inductance of 0.04 H. The resistance per phase of the rotor winding is 0.2 N and its inductance is 0.04 H. 4. Also, calculate the current and power factor when the slip-rings are short-circuited and the motor is running with a slip of 5 per cent. Assume the flux to remain constant. Identify it`s given and solve it

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

Chapter35: Harmonics 916

Section: Chapter Questions

Problem 3RQ: Would a positive-rotating harmonic or a negative-rotating harmonic be more harmful to an induction...

See similar textbooks

Similar questions

Would a positive-rotating harmonic or a negative-rotating harmonic be more harmful to an induction motor? Explain your answer.
A 200V, 3, star connected induction motor takes 30A at a line voltage of 35V with rotor locked. With this line voltage, power input to motor is 450W and core loss is 60W.The dc resistance between a pair of stator terminals is 0.15Ω. If the ratio of ac to dc resistance is 1.6, find the equivalent leakage reactance/phase of the motor and the stator and rotor resistance per phase.
A 3-phase, 6 pole, 440 V, 60 Hz, Y-connected induction motor has the following impedances per phase referred to the stator circuit: R1=0.43 Ω, R2=0.54 Ω, X1=1.263 Ω, X2=0.608 Ω, XM=43Ω The total rotational losses are 1100 W and are assumed to be constant. The core loss is lumped in with the rotational losses. For a rotor slip of 2 percent at the rated voltage and rated frequency, Find the motor speed, stator current, output power
The stator resistance of a 1-phase induction motor is 2.5 ohm and its leakage reactance is 2.0 ohm. Onno-load, the motor takes 4 A at 96 V and at 0.25 lagging power factor. The no-load friction andwindage loss is negligible. Under the blocked-rotor condition, the input power is 130 W at 6 A and42 V. obtain the equivalent circuit parameters.
TOPIC: AC Machines - Induction Motor A three-phase, 3 KV, P=24, 50Hz, Y-connected slip ring IM has a rotor resistance of 0.015 ohm and a stand still reactance of 0.265 ohm per phase. Full load torque Is obtained al a speed of 245 rpm. Neglect stator impedance, Calculate (A) Ratio of Maximum Torque to Full load Torque (B) Speed at Maximum Torque
Three-phase induction motor, 460 V 50 Hz, 4 poles, 50 hp with Delta, operating at 3.8% slip rated torque when receives Line Voltage 460 V, 50 Hz The parameters of the equivalent circuit per phase are as follows.R1 = 0.33, X1 = X2 = 0.42 and Xm = 30 Ohm / phase.Answer the following questions by neglecting the mechanical losses, Core losses and Stray load losses.A) Value of the rotor resistance R2 B) Maximum torque and rated speed C) line current and starting torque of motor
The stator resistance of a 1-phase induction motor is 2.5 ohms and its leakage reactance is 2.0 ohms. Onno-load, the motor takes 4 A at 96 V and at 0.25 lagging power factor. The no-load friction andwindage loss is negligible. Under the blocked-rotor condition, the input power is 130 W at 6 A and42 V. Obtain the equivalent circuit parameters.
Design and develop equivalent circuit model of a single phase Induction motor with th consideration of core losses present with the parameter consideration of stator resistance R1 and reactance X1 and two rotor parameters which includes r2,x2 and magnetising reactance xm. (Illustration is required) Draw by hand please
A 110-V, 50-Hz single phase induction motor (split -phase) has the following constants for the main and auxiliary windings: Main winding, Zm (1.2 +j 25) ohm and auxiliary winding, Z,= (12+j 5) ohm. Determine (i) total current and power factor currents at time of starting, and (ii) phase angle between the main winding current and starting winding current.
A single-phase, 120 V, 60 Hz, four-pole, split-phase induction motor has the following standstill impedances:Main winding: Zm =5+j6.25Auxiliary winding: Za =8+j6a) Determine the value of capacitance to be added in series with the auxiliary winding to obtainmaximum starting torque.b) Compare the starting torques and starting current with and without the added capacitance in theauxiliary winding circuit when operated from a 120V, 60Hz supply
A 25 HP, 6 pole, 50 Hz, 3-phase slip ring induction motor runs at 960revolutions per minute on full load with a rotor current per phase of 35 A.Allowing 250 W for the copper loss in the short-circuiting gear, and 1000Wfor mechanical losses, find the resistance per phase of the three-phaserotor winding.
a)the figure below shows the per-phase equivalent circuit of a two - pole three- phase induction motor operating at 50 Hz . The voltage (E1) across the magnetizing inductance is 210 v , and the slip (s) is 0.05 . What is the developed torque produced by the motor ? b) A 4 poles , 50Hz , Y-connected three phase induction motor has the per phase equivalent circuit parameters of (R1 =R2=0.12 , X1=X2=0.6 , Xm =12 ) ohm and I2 =20 (0 . Use exact equivalent circuit to determine the following at rated slip of 0.03 : I. Stator current II. Magnetizing current III. Power factor IV. Developed torque C) What is the physical meaning for each of the following induction motor parameters : R1 , R2 , Rc , X1 , X2 , Xm d) What is synchronous watt