A 36.0 mL sample of aqueous sulfuric acid was titrated with 0.250 M KOH(aq) until the acid-base indicator signaled that the solution was neutralized. The mixture was then carefully evaporated to dryness, the residue was dried in a drying oven. The residue was then weighed and a value of 861 mg was obtained for its mass. Calculate a value for the volume of the potassium hydroxide solution that was used in the titration from this data. Answer with correct units and significant figures.

A 36.0 mL sample of aqueous sulfuric acid was titrated with 0.250 M KOH(aq) until the acid-base indicator signaled that the solution was neutralized. The mixture was then carefully evaporated to dryness, the residue was dried in a drying oven. The residue was then weighed and a value of 861 mg was obtained for its mass. Calculate a value for the volume of the potassium hydroxide solution that was used in the titration from this data. Answer with correct units and significant figures.

Principles of Modern Chemistry

8th Edition

ISBN:9781305079113

Author:David W. Oxtoby, H. Pat Gillis, Laurie J. Butler

Publisher:David W. Oxtoby, H. Pat Gillis, Laurie J. Butler

Chapter17: Electrochemistry

Section: Chapter Questions

Problem 80AP

See similar textbooks

Similar questions

Tartaric acid, H2C4H4O6, is a diprotic acid that naturally occurs in the production of wine. Jose was tasked to find out the acid content in a 100.0 mL wine sample by titrating it with a standardized solution of NaOH. He was able to establish the working concentration of the NaOH solution by using 35.21 mL of it to titrate a primary standard of KHP that weighed 3.001 g. The grams and %w/w of Tartaric acid present in the 100.0 mL wine sample were then determined by titrating a 25.00 mL aliquot using 43.56 mL of the standardized NaOH solution. H2C4H4O6 (aq) + 2NaOH (aq) ↔ Na2C4H4O6 (aq) + 2H2O (l) Assume that the density of the wine sample is 1.000 g/mL MM of KHP = 204.22 g/mol MM of H2C4H4O6 = 150.087 g/mol What is the molar concentration of the prepared NaOH solution?…
A student was asked to determine the concentration of ammonia, a volatile substance, in a commercially available cloudy ammonia solution used for cleaning. First the student pipetted 25.00 mL of the cloudy ammonia solution into a 250.0 mL conical flask. 50.00 mL of 0.100 mol L-¹ HCl(aq) was immed added to the conical flask which reactedwith the ammonia in solution. The excess (unreacted) HC1 was then titrated with 21.50 mL 0. 050 M Na2CO3 (aq). Calculate the concentration of the ammonia in the cloudy ammonia solution.
Malic acid (C4H6O5) is a dicarboxylic acid that naturally occurs in the production of bignay wine. Maria was tasked to find out the acid content in a 200.0 mL wine sample by titrating it with a standardized solution of KOH. He was able to establish the working concentration of the KOH solution by using 39.12 mL of it to titrate a primary standard of KHP that weighed 3.021 g. The grams and %w/w of Malic acid present in the 200.0 mL wine sample were then determined by titrating a 20.00 mL aliquot using 48.95 mL of the standardized KOH solution. C4H6O5 (aq) + 2KOH (aq) ↔ K2C4H4O5 (aq) + 2H2O (l) Assume the density of the wine sample is 1.000 g/mL MM of KHP = 204.22 g/mol MM of C4H6O5 = 134.0874 g/mol ? What is the molar concentration of the prepared KOH solution?…
Malic acid (C4H6O5) is a dicarboxylic acid that naturally occurs in the production of bignay wine. Maria was tasked to find out the acid content in a 200.0 mL wine sample by titrating it with a standardized solution of KOH. He was able to establish the working concentration of the KOH solution by using 39.12 mL of it to titrate a primary standard of KHP that weighed 3.021 g. The grams and %w/w of Malic acid present in the 200.0 mL wine sample were then determined by titrating a 20.00 mL aliquot using 48.95 mL of the standardized KOH solution. C4H6O5 (aq) + 2KOH (aq) ↔ K2C4H4O5 (aq) + 2H2O (l) Assume the density of the wine sample is 1.000 g/mL MM of KHP = 204.22 g/mol MM of C4H6O5 = 134.0874 g/mol What is the molar concentration of the prepared KOH solution?…
A series of iron standard solutions need to be made from a 40 ppm iron stock solution provided. For the first dilution, pipet 5.00 mL of the 40 ppm stock solution into a 100.00 mL volumetric flask and dilute to mark. What is the new concentration of the diluted solution?
A quantitative analysis for ethanol, C2H6O, can be accomplished by a redox back titration.Ethanol is oxidized to acetic acid, C2H4O2, using excess dichromate, Cr2O72–, which is reduced toCr3+. The excess dichromate is titrated with Fe2+, giving Cr3+ and Fe3+ as products. In a typicalanalysis, a 5.00-mL sample of a brandy is diluted to 500 mL in a volumetric flask. A 10.00-mLsample is taken and the ethanol is removed by distillation and collected in 50.00 mL of anacidified solution of 0.0200 M K2Cr2O7. A back titration of the unreacted Cr2O72–requires 21.48mL of 0.1014 M Fe2+. Calculate the %w/v ethanol in the brandy
To determine , by gravimetric analysis, the concentration of barium ions (Ba2+) in a given solution, 25.00cm3 of it are pipetted into a beaker and an excess of dilute sulphuric acid is added to it. The precipitate then obtained (BaSO4) is filtered, dried and weighed. The mass of the precipitate is found to be 1.167g Calculate the concentration of barium ions in the solution? (only 2 decimal places). _________Mol/L
By pipet, 5.00 mLmL of a 0.823 MM stock solution of potassium permanganate (KMnO4) was transferred to a 50.00-mL volumetric flask and diluted to the calibration mark. Determine the molarity of the resulting solution.
A 2.00 mL aliquot of reagent grade HCl was diluted to 250.0 mL. The diluted solution was standardized using sodium carbonate, and the concentration of the prepared solution was determined to be 0.09606 M HCl. What is the concentration of reagent HCl (in %w/w)? Note: the specific gravity of the reagent HCl was 1.18 g/mL.
please help me The aluminum in a 1.200g sample of impure ammonium aluminum sulfate was precipitatedwith aqueous ammonia as the hydrous Al2O3 · XH2O. The precipitate was filtered and ignitedat 100°C to give anhydrous Al2O3, which weighed 0.2001 g. Express the result of this analysisin terms of % Al.
A plant manufacturing nails and screws uses a large pool (volume = 10,000 L) to collect and treat its residual wastewater before discharging it in a nearby stream. The manufacturing process makes use of a strong acid (HCl) and a weaker one (phosphoric acid, H3PO4; pKa1 = 2.148, pKa2 = 7.20, pKa3 = 12.15), before discharging them in the pool for treatment (neutralization). Once the pool is filled to its maximum capacity, a technician measures the chlorine and phosphorus concentrations in the wastewater to be 0.5 M and 1.0 M, respectively. Assume (i) that chlorine and phosphorus come only from HCl and phosphoric acid, respectively, and (ii) that no H+ was consumed (or neutralized) in the manufacturing process. (a) Knowing that the technician has to bring the pH of the waste water back to a minimum of 7.2 before discharging it in the stream, what is the minimum amount (in kg) of NaOH(s) (40 g/mol) that he has to add to the pool before discharging the waste water in the stream? (b) What…
A plant manufacturing nails and screws uses a large pool (volume = 10,000 L) to collect and treat its residual wastewater before discharging it in a nearby stream. The manufacturing process makes use of a strong acid (HCl) and a weaker one (phosphoric acid, H3PO4; pKa1 = 2.148, pKa2 = 7.20, pKa3 = 12.15), before discharging them in the pool for treatment (neutralization). Once the pool is filled to its maximum capacity, a technician measures the chlorine and phosphorus concentrations in the wastewater to be 0.5 M and 1.0 M, respectively. Assume (i) that chlorine and phosphorus come only from HCl and phosphoric acid, respectively, and (ii) that no H+ was consumed (or neutralized) in the manufacturing process.(a) Knowing that the technician has to bring the pH of the waste water back to a minimum of 7.2 before discharging it in the stream, what is the minimum amount (in kg) of NaOH(s) (40 g/mol) that he has to add to the pool before discharging the waste water in the stream?(b) What will…