:A 4-pole, lap-wound, long-shunt, d.c.compound generator has useful flux per pole of 0.07 Wb. The armature winding consists of 220 turns and the resistance per tum is 0.004 ohms. Calculate the terminal voltage if the resistance of shunt and series field are 100 ohms and 0.02 ohms respectively ; when the generator is running at 900 r.p.m. with armature current of 50 A. Also calculate the power output in kW for the generator.

:A 4-pole, lap-wound, long-shunt, d.c.compound generator has useful flux per pole of 0.07 Wb. The armature winding consists of 220 turns and the resistance per tum is 0.004 ohms. Calculate the terminal voltage if the resistance of shunt and series field are 100 ohms and 0.02 ohms respectively ; when the generator is running at 900 r.p.m. with armature current of 50 A. Also calculate the power output in kW for the generator.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.3P

See similar textbooks

Similar questions

A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. a) Draw the the figure. And find the generated voltage.
. When a self-excited compound DC generator supplies load, the terminal voltage is not the same as the generated emE Why? a) voltage drop across the armature resistance will reduce the voltage available at the load terminals b) where there is a series field, voltage drop across the series field resistance will reduce the voltage available at the load terminals c) both "a" and "b" d) neither "a" nor "b"
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. c) write down the factors to improve the generated voltage.
A shunt generator supplies a 31kW load at 230V through cables of resistance, R = 122mΩ. If the field winding resistance, Rf =50Ω and the armature resistance, Ra =51mΩ. Determine the following below: The terminal voltage is, Answer and unit for part 1 The e.m.f. generated in the armature is,
A 150 kW, 250-volt compound DC generator has its field windings which are connected in long shunt. If the shunt-field winding resistance is 20 ohms, what is the current in the series-field winding? (Note that the series field resistance is connected in series with the armature.)
A short shunt compound generator has an armature; series field and shunt field resistances of 0.031Ω, 0.04Ω and 100Ω respectively. At rated load condition, the terminal voltage is 400V while the armature is developing an emf of 409V. Find the kW delivered to the load at rated condition.
A 20 kW, 440-V, short-shunt, compound d.c. generator has a full-loade fficiency of 87%. If the resistance of the armature and interpoles is 0.4Ω and that of the series and shunt fields 0.25 Ω and 240 Ω respectively, calculate the combined bearing friction, windage and core-loss of the machine. [Ans. 725 W]
A separately excited generator has no-load voltage of 125V. A certain load rated at 1200W, 120V is then connected at the terminal. Calculate the series resistance needed to connect to the armature circuit in order for the load to operate at rated condition if the armature resistance is 0.0692Ω.
A long-shunt, four pole, 1500-W, 250-V, duplex wave-wound DC compound generator with the rated speed of 500 r.p.m., has a shunt field resistance of 100 Ω, a series field resistance of 0.05 Ω and an armature resistance of 0.2 Ω. If the flux per pole is 48.798 mWb and a total of 620 conductors, calculate the following: (a) the generated voltage, (b) the field currents, (c) the power generated in the armature.
A long shunt compound DC generator delivers a load current of 150A at 230V and has armature, series field and shunt field resistances of 0.032, 0.015 and 92Ωrespectively. Calculate (i) induced emf (ii) total power generated and (iii) distribution of this power (iv) voltage regulation
The magnitude of the no-load, line-neutral voltage induced on the ‘a’-phase stator windings of a synchronous 3? generator is |?a | = 480 V. Presume the stator winding resistance is negligible, and that the synchronous reactance is ?௦ = 1.1 Ω. The full-load, per-phase current magnitude for the generator is 30 A at a power factor of 0.8 leading . For these conditions: a. What is the line-neutral ‘a’-phase terminal voltage, ?థ? b. What is the power angle (?)? c. What is the percent voltage regulation? d. What is the total 3? complex, real, and reactive power delivered to the load?
PUT THE EQUATION Given a progressive 2-layer simplex lap winding for a 4-pole dc generator having 20 slots and 20 commutator segments, determine the following and input it on the text field provided. determine: a.Coil Pitch, Ys b.Commutator Pitch, Yc, Back Pitch, YB d. Front Pitch, YB, No. of Parallel Paths