A 4400V, 3-ph, Y- connected synchronous motor has an effective resistance and synchronous reactance of 3Ω and 19Ω per phase respectively. If the open–circuit generated emf is 4800V between lines, calculate The current .........amper * P.F at Maximum mechanical power Total Cu losses.........watt

A 4400V, 3-ph, Y- connected synchronous motor has an effective resistance and synchronous reactance of 3Ω and 19Ω per phase respectively. If the open–circuit generated emf is 4800V between lines, calculate The current .........amper * P.F at Maximum mechanical power Total Cu losses.........watt

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter6: Power Flows

Section: Chapter Questions

Problem 6.48P

See similar textbooks

Similar questions

a 3-phase, 220-v, 50-hz, 1500 r.p.m., mesh-connected synchronous motor has a synchronous impedance of 4 ohm per phase. it receives an input line current of 30a at a leading power factor of 0.8. find the line value of the induced e.m.f. and the load angle expressed in mechanical degrees. if the mechanical load is thrown off without change of excitation, determine the magnitude of the current under the new conditions. neglect losses.
A short shunt compound generator supplies a load of 10 kW at 200 V through a pair of feeder and series field resistance 0.10 ohm. Armature resistance, shunt field resistance and series field resistance are 0.01 ohm, 52.2 ohms and 0.10 ohm, respectively. If the core friction and windage losses amount to 631 watts, the BHP of the driving engine is nearest to
The synchronous reactance of the direct-axis and quadrature-axis of a three-phase,40-pole, 50 Hz, 13,8 kV, salient-pole synchronous generator is 2,38 Ω and 1,33 Ωrespectively. The resistance of the star-connected stator is negligible. The load angle ofthe machine is 30°e and the excitation is set to induce an emf of 167%. Sketch the phasordiagram and calculate:(a) current(b) power(c) reluctance torque(d) the maximum load angle(e) the maximum power developed
electrical machines 3. 400 V 50 Hz, Y-connected, 6-pole synchronous generator per phase synchronous reactance 1.0 Ω at back power factor of 0.9 full load armature current 50 A, friction and wind losses 1.25 kW and core losses at 50Hz full load 1.0 kW and armature resistance and loss are neglected. The excitation current is adjusted so that the no-load output voltage is 400V. According to this; a) Calculate the rotation speed of the generator. b) find the terminal voltages at load with rated current at 0.8 back power factor and unit power factor . c) Calculate the voltage regulation of the generator for power coefficients of 0.8 back and 1.0.
Show that an alternator running in parallel on constant-voltage and frequency bus-bars has a natural time period of oscillation. Deduce a formula for the time of one complete oscillation and calculate its value for a 5000-kVA, 3-phase, 10,000-V machine running at 1500 r.p.m. on constant 50-Hz bus-bars. The moment of inertia of the whole moving system is 14,112 kg-m2 and the steady short-circuit is five times the normal full-load value. ANSWER IS [1.33 second]
In a three-phase, Y-connected, 750-kVA, 1732-V, synchronous generator afield current of 20 A at the rated speed produces a current of 300 A onshort circuit and a voltage of 1732 V on open circuit. The resistance betweenany two terminals of the generator is 0.8 R. Determine the synchronousreactance of the generator. The rotational loss is 20 kW. Using the per-unitsystem, determine the voltage regulation and the efficiency of the generatorwhen it delivers the rated load at its rated voltage and unity power factor.
An AC Asynchronous motor has the following parameters; Connected voltage,UN=400V Frequency,f=50hZ Nominal PowerPN=1kW, Breakdown Slip,SBD=0.289 Rotational speed (at nominal),nN=1410min-1 Number of poles=2 Nominal Efficiency ,դ=0.84 Calculate I)Calculate the Apparent Power of Nominal Operation,SL1,N1 II)Calculate the Reactive Power of Nominal Operation per single phase,QL1,N1 III)Calculate the Capacitance of CN1 which has to be connected parallel to the single Phase full power factor at nominal operation
A 6-phase ∆-connected 1600 V (line-to-line), 150 kW, 50 Hz, six-pole induction driveis used in an electric car. The drive has the following parameter values in Ω/phasereferred to the stator:R1 =0.334 Ω R2 =0.168 Ω Rm1 = 125 ΩX1 = 0.273 Ω X2 = 0.287 Ω Xm1 = 16.78 ΩThe total friction, windage, and core losses may be assumed to be constant at Prot =773 W, independent of load. For a slip value of s=0.015: b ) Compute the speed, output torque, power and stator current d) Calculate the efficiency when the motor is operated at rated voltage andfrequency. answer：b) n= 985 rpm; Torque T= 1.18 x104 Nm; Power= 1.22 x106 W; Stator current I = 175.72 /32.79° (d) Efficiency = 86.4%
A 480V, 375kVA 0.8lagging power factor, star connected S.G has a syn Reactance of 0.4 ohm and negligible armature resistance. This generator is supplying power to a 480V, 80kW. 0.8 leading P.f star connected S.M with syn . Reactance of 18 and negligible armature resistance , the SG is adjusted to have terminal voltage of 480V when motor operating at rated power and unity power factor . Find : 1) E for both machines. 2) Terminal voltage and p.f if flux of motor increased by 10%
QUESTION 1:- (a) A 4-pole, 3-phase, star-connected, 50 Hz synchronous generator, with a synchronous impedance of j24.5 Ω/phase and negligible resistance, delivers 5 MW of power to a 13.8 kV busbar. At this operating point, the excitation is equal to 1.8 p.u. Calculate the phase value of the generated emf (E) and hence calculate the electrical load angle, δ, at which the machine is operating. (b) Sketch a typical operating chart for a salient pole synchronous generator and on the chart identify the following; The Apparent Power limit, The field (excitation) limit, The Real Power limit, A line which represents a constant lagging power factor, The rotor angle for operation at any given point of operation, e.g. rated power and 0.9 power factor lag. (c) A Stamford HCI534F framesize generator has been selected for a stand-alone diesel-generation application. The generator is to operate at 400 V, 50 Hz, with the self-excited (SX) excitation scheme. Datasheet information can be…
Picture Single phase equivalent examples of a 3-phase star connected induction motor are given below. Total mechanical losses and negligence losses. Rated Power 4kW Rated voltage 380 Vrms line (220Vrms phase-neutral voltage) Rated frequency 50Hz Number of poles 4 r1= 1.5 Ω, x1 = 1.5jΩ, r2= 0.55Ω, x2 = 1.25jΩ, xm= 14jΩ, rc= ∞ This motor slippage is measured at 3% (s = 0.03) when loaded with a load below the rated point.
A 3-phase, Y connected, round rotor synchronous generator rated at 12kVA, 240V has a Synchronous reactance of 1.2Ω per phase and an armature resistance of 0.6Ω per phase. Calculate: i) The generated phase voltage at full load and 0.8 lagging power factor. ii) The percentage voltage regulation at full-load with 0.8 lagging power factor. iii) The generated phase voltage at full load and 0.8 leading power factor. iv) The percentage voltage regulation at full-load with 0.8 leading power factor.