A bank of 120-employees is maintained at 24°C db and 50% RH. The heat gain due to heat transfer through walls, roof, ..etc is 10 kW. The outside air temperature is 35°C and its relative humidity is 60%. Calculate the followings: (a) Ventilation air required. (b) Sensible and latent heat gains due to occupants. (CLF = 0.86) (c) Volumetric flow rate of supply air if the supply temperature is 18°C.

A bank of 120-employees is maintained at 24°C db and 50% RH. The heat gain due to heat transfer through walls, roof, ..etc is 10 kW. The outside air temperature is 35°C and its relative humidity is 60%. Calculate the followings: (a) Ventilation air required. (b) Sensible and latent heat gains due to occupants. (CLF = 0.86) (c) Volumetric flow rate of supply air if the supply temperature is 18°C.

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter40: Typical Operating Conditions

Section: Chapter Questions

Problem 1RQ: The standard design conditions for air-conditioning systems established by the Air-Conditioning,...

See similar textbooks

Similar questions

Solve all please i give thumb up? Outside air at 15°C and 20% relative humidity is admitted at a volumetric rate of 15m³/min into an air conditioning system composed of a simple heating section followed by a humidification section, which must supply air at 27 °C and 65% relative humidity. The airflow temperature between the heating and humidifying sections is 22°C and the entire air conditioner operates at 70kPa. Determine, using calculations: (a) the rate of heat supply to the heating section, in kW, is ______. (b) the wet bulb temperature of the air after the heating section, in °C, is ______. (c) the mass flow rate of steam in the humidification section, in g/s, is ______. (d) the temperature of the steam injected into the humidification section for a steam pressure of 200kPa, in °C, is _______
An atmospheric cooling tower is to provide cooling for the jacket of water of a four-stroke, 800 kW Diesel generator. The cooling tower efficiency is 60% at a temperature approach of 10C. If the ambient air has a relative humidity of 70% and dry bulb temperature of 32C, determine (a) the cooling water supplied to the diesel engine in liters per hour and (b) mass of air in kg/s generator efficiency is 97% useful = 30% and cooling loss = 25%
Calculate the amount of sensible heat that must be added to 50 kg of air at 30 deg C Tdb and 23 deg C Twb to raise the temperature of air to 50 deg C dry bulb.
The standard design conditions for air-conditioning systemsestablished by the Air-Conditioning, Heating andRefrigeration Institute (AHRI) are outside temperature______°F, inside temperature ______°F, with a humidityof ______%.
Consider a large classroom on a hot summer day with 150 students, each dissipating 60 W of sensible heat. All the lights, with 6.0 kW of rated power, are kept on. The room has no external walls, and thus heat gain through the walls and the roof is negligible. Chilled air is available at 15°C, and the temperature of the return air is not to exceed 25°C. Determine the required flow rate of air, in kg/s, that needs to be supplied to the room to keep the average temperature of the room constant.
In the C-D duct, with the help of a refrigeration cycle which uses R-134A as a working fluid, atmospheric air is cooled at a rate of 34 m3/min, which is entering at a temperature of 36°C and a relative humidity of fifty%. The enthalpy produced in thisprocess is 29.46 kJ/kg of mass of dry air and it is possible to cool the air to 19°C.During this process the Plant Engineers need to know the flow of water that is extracted from the incoming air and the KW needed for the cooling process if the water leaves at 19.2°C.
A small auditorium is required to be maintained at 22 C DBT and 70% RH. The ambient conditions are 30 C DBT and 75% RH. The amount of free air circulated is 200m3/min. The required conditions are achieved by first cooling and dehumidifying through a cooling coil having apparatus dew point of 140C and then by heating. With the help of psychrometric chart, find: i) capacity of cooling coil in TR and its by pass factor, ii) the amount of water vapor removed by the cooling coil in kg/hr, ii) capacity of heating coil in KW and its surface temperature. Assume bypass factor as 0.2 IES1992
If the dry and wet bulb temperatures of moist air are 35 and 26 respectively find the other thermodynamics properties of air from the psychrometric chart. (Show diagram )
The percent rating of water tube boiler is 200 %, factor of evaporation is 1.10, and heating surface is 400 ft2. Determine the rate of evaporation, in kg/hr.
The following data refers to an air conditioning system to be designed for an industrial process for hot and wet climate. Outside conditions = 38o C DBT and 74 % RH. Required conditions are 23o C DBT and 65 % RH. This is achieved by cooling and dehumidifying and then by heating. If 42 m 3 of air is absorbed by the plant every minute, find the capacity of cooling coil in TR, capacity of heating coil in kW and amount of water removed per hour
Air enters a humidifier at 34.25°C and 30% RH. If the air leaves the humidifier at 70% RH. Determine: The exit dry-bulb temperature of the air in °C.The saturation effectiveness in %.
In an air-conditioning unit 3.5 m3/s of air at 32 C dry-bulb temperature, 50 percentrelative humidity, and standard atmospheric pressure enters the unit. The leavingcondition of the air is 18 C dry-bulb temperature and 90 percent relative humdity.Using properties from the psychrometric chart, (a) calculate the refrigeratingcapacity in kilowatts and (b) determine the rate of water removal from the air