Need help with these practice questions, I’m trying to figure out how to get an answer A child's electronic toy is supplied by three 1.58 V alkaline cells having internal resistances of 0.0210 Q in series with a 1.53 V carbon-zinc dry cell having a 0.190 0 internal resistance. The load resistance is 15.0 0.(a) Draw a circuit diagram of the toy and its batteries. (Submit a file with a maximum size of 1 MB.)Choose File No file chosen(b) What current (in A) flows?A(c) How much power (in W) is supplied to the load?(d) What is the internal resistance (in O) of the dry cell if it goes bad, resulting in only 0.500 W being supplied to the load? The label on a portable radio recommends the use of rechargeable nickel-cadmium cells (Nicads), although they have a 1.25 V emf while alkaline cells have a 1.58 V emf. The radio has a 3.30 n resistance.(a) Draw a circuit diagram of the radio and its batteries. (Submit a file with a maximum size of 1 MB.)Choose File No file chosen(b) Calculate the power delivered to the radio (in W) when using NiCad cells each having an internal resistance of 0.0410 0.2426939394X W(c) Calculate the power delivered to the radio (in W) when using alkaline cells each having an internal resistance of 0.210 0.w(d) Does this difference seem significant, considering that the radio's effective resistance is lowered when its volumeturned up?

Since we only answer up to 3 sub-parts, we’ll answer the first 3. Please resubmit the question and…

A child's electronic toy is supplied by three 1.58 V alkaline cells having internal resistances of 0.0210 0 in series with a 1.53 (a) Draw a circuit diagram of the toy and its batteries. (Submit a file with a maximum size of 1 MB.) Choose File No file chosen (b) What current (in A) flows? (c) How much power (in W) is supplied to the load? (d) What is the internal resistance (in 0) of the dry cell if it goes bad, resulting in only 0.500 W being supplied to the load?

A child's electronic toy is supplied by three 1.58 V alkaline cells having internal resistances of 0.0210 0 in series with a 1.53 (a) Draw a circuit diagram of the toy and its batteries. (Submit a file with a maximum size of 1 MB.) Choose File No file chosen (b) What current (in A) flows? (c) How much power (in W) is supplied to the load? (d) What is the internal resistance (in 0) of the dry cell if it goes bad, resulting in only 0.500 W being supplied to the load?

University Physics Volume 2

18th Edition

ISBN:9781938168161

Author:OpenStax

Publisher:OpenStax

Chapter10: Direct-current Circuits

Section: Chapter Questions

Problem 45P: A child's electronic toy is supplied by three 1.58-V alkaline cells having internal resistances of...

See similar textbooks

Similar questions

A child’s electronic toy is supplied by three 1.58-V alkaline cells having internal resistances of 0.0200 in series with a 1.53-V carbon-zinc dry cell having a 0.100- internal resistance. The load resistance is 10.0 . (a) Draw a circuit diagram of the toy and its batteries, (b) What current flows? (c) How much power is supplied to the load? (d) What is the internal resistance of the dry cell if it goes bad, resulting in only 0.500 W being supplied to the load?
A rechargeable battery has an emf of 13.2 V and an internal resistance of 0.850 . It is charged by a 14.7-V power supply for a time interval of 1.80 h. Alter charging, the battery returns to its original state as it delivers a constant current to a load resistor over 7.30 h. Find the efficiency of the battery as an energy storage device. (The efficiency here is defined as the energy delivered to the load during discharge divided by the energy delivered by the 14.7-V power supply during the charging process.)
Resistors are commonly rated at 18W,14W,12W ,1 W and 2 W for use in electrical circuits. If a current of1 = 2.00 A is accidentally passed through a R=1.00 resistor rated at 1 W, what would be the most probable outcome? Is there anything that can be done to prevent such an accident?
When operating on a 120-V circuit, an electric heater receives 1.30 103 W of power, a toaster receives 1.00 103 W, and an electric oven receives 1.54 103 W. If all three appliances are connected in parallel on a 120-V circuit and turned on, what is the total current drawn from an external source? (a) 24.0 A (b) 32.0 A (c) 40.0 A (d) 48.0 A (e) none of those answers
The power dissipated in a resistor is given by P = V2/R, which means power decreases if resistance increases. Yet this power is also given by P = I2R, which means power increases if resistance increases. Explain why there is no contradiction here.
When resistors with different resistances are connected in series, which of the following must be the same for each resistor? Choose all correct answers. (a) potential difference (b) current (c) power delivered (d) charge entering each resistor in a given time interval (e) none of those answers
When the current in the portion of the circuit shown in Figure P32.65 is 2.00 A anti increases at a rate of 0.500 A/s, the measured voltage is Vab = 9.00 V. When the current is 2.00 A and decreases at the rate of 0.500 A/s. the measured voltage is Vab = 5.00 V. Calculate the values of (a) I. and (b) R
Power P0 = I0 V0 is delivered to a resistor of resistance R0. If the resistance is doubled (Rnew = 2R0) while the voltage is adjusted such that the current is constant, what are the ratios (a) Pnew/P0 and (b) Vnew/V0? If, instead, the resistance is held constant while Pnew = 2P0, what are the ratios (c) Vnew/V0, and (d) Inew/I0?
Power P0 = I0 V0 is delivered to a resistor of resistance R0. If the resistance is doubled (Rnew = 2R0) while the voltage is adjusted such that the current is constant, what are the ratios (a) Pnew/P0 and (b) Vnew/V0? If, instead, the resistance is held constant while Pnew = 2P0, what are the ratios (c) Vnew/V0, and (d) Inew/I0?
How many electrons flow through a point in a wire in 3.00s if there is a constant current of I= 4.00 A