A fireman climbs a 8m high ladder carrying a 5.9999in diameter hose that has a 1.4in diameter nozzle. The pump has an absolute pressure of 4atm. What is the water velocity from the nozzle? Assume that water is incompressible, its density is 1000kg/m³ , and 1 inch = 0.0254 m. The acceleration of gravity is 9.8m/s² and 1 atm = 1.01 x 10° Pa. 1. V2 = 1.50598m/s 2. v2 = 14.9645m/s 3. V2 = 21.2258m/s 4. V2 = 27.6599m/s 5. V2 = 1.15567m/s %3D 6. V2 = 15.0089m/s 7. V2 = 1.50152m/s 8. V2 = 27.578m/s S 9. V2 = 1.15225m/s 10 V2 = 21.163m/s

A fireman climbs a 8m high ladder carrying a 5.9999in diameter hose that has a 1.4in diameter nozzle. The pump has an absolute pressure of 4atm. What is the water velocity from the nozzle? Assume that water is incompressible, its density is 1000kg/m³ , and 1 inch = 0.0254 m. The acceleration of gravity is 9.8m/s² and 1 atm = 1.01 x 10° Pa. 1. V2 = 1.50598m/s 2. v2 = 14.9645m/s 3. V2 = 21.2258m/s 4. V2 = 27.6599m/s 5. V2 = 1.15567m/s %3D 6. V2 = 15.0089m/s 7. V2 = 1.50152m/s 8. V2 = 27.578m/s S 9. V2 = 1.15225m/s 10 V2 = 21.163m/s

Name: A fireman climbs a 8m high ladder carrying a5.9999in diameter hose th
Uploaded: 2024-03-20T06:51:10.000Z
Channel: Bartleby
Description: A fireman climbs a 8m high ladder carrying a5.9999in diameter hose that has a 1.4in diameternozzle. The pump has an absolute pressure of4atm. What is the water velocity from the nozzle?Assume that water is incompressible, its density is1000kg/m³ , a

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter15: Fluid Mechanics

Section: Chapter Questions

Problem 37P: A horizontal pipe 10.0 cm in diameter has a smooth reduction to a pipe 5.00 cm in diameter. If the...

See similar textbooks

Similar questions

A U-tube open at both ends is partially filled with water (Fig. P15.67a). Oil having a density 750 kg/m3 is then poured into the right arm and forms a column L = 5.00 cm high (Fig. P15.67b). (a) Determine the difference h in the heights of the two liquid surfaces. (b) The right arm is then shielded from any air motion while air is blown across the top of the left arm until the surfaces of the two liquids are at the same height (Fig. P15.67c). Determine the speed of the air being blown across the left arm. Take the density of air as constant at 1.20 kg/m3.
A large storage tank with an open top is filled to a height h0. The tank is punctured at a height h above the bottom of the tank (Fig. P15.39). Find an expression for how far from the tank the exiting stream lands. Figure P15.39
Water flows through a pipe that gradually descends from a height of 6.78 m to the ground. Near the top, the cross-sectional area is 0.400 m2, and the pipe gradually widens so that its area near the ground is 0.800 m2. Water leaves the pipe at a speed of 16.8 m/s. What is the difference in the water pressure between the top and bottom of the pipe?
Review. The tank in Figure P15.13 is filled with water of depth d = 2.00 m. At the bottom of one sidewall is a rectangular hatch of height h = 1.00 m and width w = 2.00 m that is hinged at the top of the hatch. (a) Determine the magnitude of the force the water exerts on the hatch. (b) Find the magnitude of the torque exerted by the water about the hinges.
(a) Verify that a 19.0% decrease in laminar flow through a tube is caused by a 5.00% decrease in radius, assuming that all other factors remain constant. (b) What increase in flow is obtained from a 5.00% increase in radius, again assuming all other factors remain constant?
Water is moving at a velocity of 2.00 m/s through a hose with internal diameter of 1.60 cm. (a) What is the flow rate in liters per second? (b) The fluid velocity in this hose's nozzle is 15.0 m/s. What is the nozzle's inside diameter?
Review. The lank in Figure P14.15 is filled with water of depth d = 2.00 m. At the bottom of one sidewall is a rectangular hatch of height h = 1.00 m and width w = 2.00 in that is hinged at the top of the hatch, (a) Determine the magnitude of the force the water exerts on the hatch, (b) Find the magnitude of the torque exerted by the water about the hinges.
A table-tennis ball has a diameter of 3.80 cm and average density of 0.084 0 g/cm3. What force is required to hold it completely submerged under water?
The gravitational force exerted on a solid object is 5.00 N. When the object is suspended from a spring scale and submerged in water, the scale reads 3.50 N (Fig. P15.24). Find the density of the object. Figure P15.24 Problems 24 and 25.
Concrete is pumped from a cement mixer to the place it is being laid, instead of being carried in wheelbarrows. The flow rate is 200.0 L/min through a 50.0-m-long, 8.00-cm-diameter hose, and the pressure at the pump is 8.00106 N/m2. Verify that the flow of concrete is laminar taking concrete's viscosity to be 48.0 (N/m2) s, and given its density is 2300 kg/m3.
How tall must a water-filled manometer be to measure blood pressures as high as 300 mm Hg?
The small piston of a hydraulic lift (Fig. P14.8) has a cross-sectional area of 3.00 cm2, and its large piston has a cross-sectional area of 200 cm2. What downward force of magnitude F1 must be applied to the small piston for the lift to raise a load whose weight is Fg = 15.0 kN?