A glass tube 1.6m long and having a diameter of 2.5cm is inserted vertically into a tank of oil (s.g. = 0.80) with the open end down and the closed end uppermost. If the open end is submerged 1.30m from the oil surface, determine the height to which the oil will rise in the tube. Assume barometric pressure is 100 KPa and neglect vapor pressure

A glass tube 1.6m long and having a diameter of 2.5cm is inserted vertically into a tank of oil (s.g. = 0.80) with the open end down and the closed end uppermost. If the open end is submerged 1.30m from the oil surface, determine the height to which the oil will rise in the tube. Assume barometric pressure is 100 KPa and neglect vapor pressure

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck decelrates at 4 m/s^2. ( WITH FREE BODY DIAGRAM)
An open tank 5m long, 2m deep and 3 m wide contains oil of relative density 0.9 to a depth of 0.9 m. If the tank is accelerated along its length on a horizontal track at a constant value of 3 m/s2 , determine: (i) The new positon of the oil surface. (ii) The pressures at the bottom of the tank at the front and rear edges. (iii) The amount of spill if the tank is given a horizontal acceleration of 4.5 m/s2 instead of 3 m/s2 .
A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck accelerates at 3 m/s^2.
A capillary tube is immersed vertically in a water container. Knowing that water starts to evaporate when the pressure drops below 3.5 kPa, determine the maximum capillary rise and tube diameter for this maximum-rise case. Take the contact angle at the inner wall of the tube to be 6° and the surface tension to be 1.00 N/m. Find the tube diameter for the maximum rise (in μm.)
A 3 m diameter , 7 m long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with 7 m long axis being horizontal. Determine the pressure difference in kPa between the front and back ends of the tank along a horizontal line when the truck accelerates at 3 m/s^2. (With Free Body Diagram)
Step by Step Determine the distance that the column of fluid will rise in a 1-cm open tube when the tube is inserted in fluid with a density of 990 kg/m^3 and a surface tension of 0.09 N/m. PLEASE Provide answer in cm and assume a contact angle of 0-degree.
A 0.018-in-diameter glass tube is inserted into mercury, which makes a contact angle of 140° with glass. Determine the capillary drop of mercury in the tube at 68°F.
A 3-m-diameter, 7-m-long cylindrical tank is completely filled with water. The tank is pulled by a truck on a level road with the 7-m-long axis being horizontal. Determine the pressure difference between the front and back ends of the tank along a horizontal line when the truck (a) accelerates at 3 m/s2 and (b) decelerates at 4 m/s2.
A 5-m-long, 4-m-high tank contains 2.5-m-deep water when not in motion and is open to the atmosphere through a vent in the middle. The tank is now accelerated to the right on a level surface at 2 m/s2. Determine the maximum pressure in the tank relative to the atmospheric pressure
Freshwater and seawater flowing in parallel horizontal pipelines are connected to each other by a double U-tube manometer, as shown. Determine the pressure difference between the two pipelines. Take the density of seawater at that location to be ? = 1035 kg/m3. Can the air column be ignored in the analysis?
Pipe A contains gasoline (SG = 0.7), pipe B contains oil (SG = 0.9), and the manometer fluid is ,ercury. Determine the new differential reading if the pressure in pipe A is decreased 25 kPa, and the pressure in pipe B remains constant. The initial differential reading is 0.30 m. (Hydrostatic)
What force, F, must be applied to the S-shaped gate to keep it closed? The gate is 1 m wide andthe radius of curvature of each part is 1 m. The liquid is water.