A group of first year students are designing gearreduction system in theMakerspace, consistingof four gears A, B, C and D. The radii of the gears areTA = 1.5 in, r = 3.5 in, rc = 2.0 in and r₁= 5.0 in.Gear A rotates clockwise with a constant angularvelocity WA = 440 rpm. Gears B and C are rotatingtogether on the same shaft.Determine:@AABrcCDTATB"D(a) the angular velocities of gears B and D,(b) the accelerations of the contact point on gear B and contact point on gear D.

Answered: Image /qna-images/answer/aee9cc4f-0f35-44a7-b931-eefde19bcf51.jpg

A group of first year students are designing gear reduction system in the Makerspace, consisting of four gears A, B, C and D. The radii of the gears are TA = 1.5 in, r = 3.5 in, rc = 2.0 in and r₁= 5.0 in. Gear A rotates clockwise with a constant angular velocity wĄ = 440 rpm. Gears B and C are rotating together on the same shaft. Determine: @A B C D TA TB "D (a) the angular velocities of gears B and D, (b) the accelerations of the contact point on gear B and contact point on gear D.

A group of first year students are designing gear reduction system in the Makerspace, consisting of four gears A, B, C and D. The radii of the gears are TA = 1.5 in, r = 3.5 in, rc = 2.0 in and r₁= 5.0 in. Gear A rotates clockwise with a constant angular velocity wĄ = 440 rpm. Gears B and C are rotating together on the same shaft. Determine: @A B C D TA TB "D (a) the angular velocities of gears B and D, (b) the accelerations of the contact point on gear B and contact point on gear D.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

(Q.1) A compound epicyclic gear is shown in Fig. for Q.1. The shaft P is drivenat 3000 rev/min while the annulus A2 is driven at 1000 rev/min in theopposite direction. The numbers of teeth in the gears are S1, 16; S2,24; A1, 60; A2, 90. Determine the speed and direction of rotation ofshaft Q. (Q.2) A compound epicyclic gear is shown in Fig. for Q.2. C and D form acompound wheel which rotates freely on shaft G. The planet wheels B andE rotate on pins fixed in arms attached to shaft G. C and F have internalteeth: the others have external teeth with the following numbers: A, 40;B, 30; D, 50; E, 20. If A rotates at 500 rev/min and wheel F is fixed,find the speed of shaft G.
The top half of a compound Epicyclic gearset is shown in Figure, with input shaft I rotating at a constant speed of 700 rpm in a clockwise direction and generating 12 kW input power. The Annulus wheel A2 isform a compound wheel with gear O and connected to an auxiliary gear N on shaft X. . The Annulus A1 rotates in a counter-clockwise direction at a speed of 5,300 rpm. Calculate the following using this condition: The speed and direction of output shaft O (NO), shaft X (NX) and gear ratio (n). If Annulus wheel A1 is locked calculate the speed and direction of output shaft O (NO), shaft X (NX) and gear ratio (n). The braking torque (Tb) (magnitude and direction) that must be applied to Annulus wheel A1 to hold it stationary, assuming gear transmission efficiency is 90%. Number of gear teeth:P1 = 30 , A1 = 120P2 = 50 , A2 = 140N = 60 , O = 120
Two mating involute spur gears of 20 pressure angle have a gear ratio of 2. The number of teeth on the pinion is 20 and its speed is 250 r.p.m. The module pitch of teeth is 10 mm. If the addendum on each wheel is such that the path of approach and the path of recess on each side are half the maximum possible length cach, find: i) the addendum for pinion and gear wheel, i) the length of arc of contact, iiithe maximum velocity of sliding during approach and recess. Assume pinion to be driver.
In a single-stage gearbox consisting of helical gear pairs, input speed ng= 900 rpm, input power P1=16 kW, the number of teeth of the pinion gear z1= 20, the number of teeth of the second gear wheel z2= 61. gear wheelmaterial is 20MnCr5, for this material: σem=230 N/mm2, pem=1500 N/mm2 and E= 2.1.105 N/mm2is (Helix angle: β=180; grip angle: α=200; factor of safety: S=1.5; form factor: Kfn=2.7; dynamic loadfactor: Kd=1.25; width factor: ψm=12; clutch ratio: ε = 1.6). (20p)a) Calculate the modulus of the gear pair.Module according to root fracture:(p1)Module according to tooth surface crushing:(p2)(Standard module values: 1 – 1.5 – 2 – 2.5 – 3 – 3.5 – 4 – 5 – 6 – 7 – 8 mm)b) Dimension the gears (Diameters of section circle, head circle and base circle, distance between axes). Pay attention the units
Provide the complete step-by-step solution, given data, conversion of units, and sketch for this problem. A turbine at 30,000 rpm is used to drive a reduction gear delivering 3 hp at 3,000rpm. The gears are 20 degrees involute herringbone gears of 28 pitch and 2 1/8 ineffective width. The pinion has 20 teeth with a helix angle of 23 deg. Determine theload normal to the tooth surface. A. 20.4 lbs B. 24.4 lbs C. 28.4 lbs D. 32.4
Two spur gears transmit 36kW with a velocity ratio of 2:1. The speed of the smaller driving gear is 100rpm. The centre distance between the shafts is to be as near as possible to 920mm. If m=10 and all-21MPa, determine a) Diameter of the shafts b)PCD for each wheel c)Number of teeth on each wheel d) Actual centre distance [ e) Width of the teeth
An epicyclic gear shown in figure below consists of ring gear, planet gear and sun gear. The ring gear has 72 internal teeth and sun gear has 32 external teeth. Planet gear meshes with both ring and sun gears and is carried on an arm which rotates about the centre of the ring gear at 20 r.p.m. If the gear A is fixed, Calculate the speed of plane gear.
Provide very clear and complete solution and diagam. SITUATIONAL PROBLEM: Two shafts are connected by spur gears. The pitch radii of the gears A and B are 200 mm and 860 mm respectively. If shaft A makes 350rpm and is subjected to twisting moment of 250 N-m. Pressure angle is 14.5 degree. What is: a.) Rpm of gear B b.) Torque in shaft B (in Newton meter). c.) Separation load of two gears (in newtons). d.) Total load on gears (in newtons).
Two parallel shafts have an angular velocity ratio of 4 to 1 are connected by gears, the largest of which has 40 teeth. Find the number of teeth of smaller gear.
Two meshing spur gears with 20° pressure angle have a module of 4 mm. The centre distance is 220 mm andthe number ofteethonthe pinionis 40. What shouldbethe new centre distance so that pressure angle is increased to 22°?
A straight gear with module m = 5 mm and face width bw = 40 mm has center distance cd = 0.1875m. The pinion has 25 teeth, the speed is 1000 rpm, and pressure angle ᶲ = 200. Find the Hertzian contact stress at the pitch point when the gear transmits 10 kW. Neglect friction forces. The gear steel has modulus of elasticity E = 207 GPa and a Poisson’s ratio of 0.30.
A simple gear train of 30 and 50 teeth for pinion and gear wheel respectively,is used to drive an electric wheelchair at a velocity that is double the maximum velocity of slip. The pinion has an equal addendum as the gear wheel, a module of 3 mm, and a pressure angle of 14.5o. The wheelchair has a maximum velocity of 5 m/s when its pinion rotates at 800 r.p.m. Calculate: 1.1. The magnitude of the velocity of slip of gears in mesh. (2)1.2. The angular speed of the gear wheel in rad/s. (4)1.3. The maximum length of a path of the approach in mm. (2)1.4. The length of a path of a recess in mm. (7)1.5. The addendum of the gears in mm. (7)1.6. The contact ratio.